Behringer HD300 User Manual

HEAVY DISTORTION HD300

Heavy Met al Distortio n E e cts Pedal

Thank you for showing your con dence in us by purchasing the BEHRINGER HEAVY DISTORTION HD300.
This high-quality e ects pe dal enables you to produce super thick, tube-like distortion plus
endless sustain. Thanks to its high-per formance features you can achieve the typic al hard rock
or heavy met al distortion sounds, when playing over a clean amp channel.

1. Controls

(2)

(1)

(3)

(9)

(6)
(5)

(4)

(8)

(7)

(1) The LEVEL control adjusts the output level.

(2) The TONE control allows you to shape your overall sound.

(3) The BOTTOM control allows you to b oost/cut the low-frequenc y range.

(4) The DIST(ortion) control adjusts the amount of distor tion.

(5) The GAIN BOOST control adjusts the gain for more extreme distor tion sounds.

(6) The ON/BATT LED illuminates when the e ect i s activated. It also serve s as a battery level indic ator.

(7) Use the footswitch to ac tivate/deactivate the e ect.

(8) Use this ¼" TS IN connector to plug in the instrument cable.

(9) The ¼" TS OUT connector sends the signal to your amp.

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V batter y
(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to
scratch the unit.

◊ ◊ The HD300 has no on/o switch. As soon as you insert the plug into the in connec tor,

the HD300 is on. When not in use, remove the plug f rom the in connector. This extends
the life of the battery.

The SERIAL NUMBER is located at the underside.

HEAVY DISTORT ION HD300

2. Safety Instructions

Do not use near water, or inst all near heat sources. Use only authorized attachments/accessories.
Do not service produc t yourself. Contact our quali ed servicing personnel for serv icing or repairs,
especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment r ight after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.

4. Speci cations

In

Connector ¼ " TS

Impedanc e 500 kΩ

Out

Connector ¼ " TS

Impedanc e 1 kΩ

Power Supply

9 V𝌂, 100 mA regulat ed

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

China/Ko rea 220 V~, 50 Hz

U.K./Austra lia 240 V~, 50 Hz

Europe 230 V~, 50 Hz

Japan 100 V~, 50 - 60 Hz

Power connec tor 2 mm DC jack,
negative center

Batter y 9 V type 6LR 61

Power consumpt ion 30 mA

Physical/Weight

Dimension s approx. 2  ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm

Weight appr ox. 0.73 lbs / 0.33 kg

BEHRING ER is constant ly strivin g to maintain the h ighest
profes sional stand ards. As a resu lt of these ef fort s, modifica tions
may be made f rom time to tim e to existing p roducts w ithout
prior not ice. Specif ications an d appearance may t herefore di ffer
from tho se listed or sh own.

MUSIC Group accepts no liability for any loss which may be su ered by any person who relies either wholly or in part upon any description, photograph,
or statement contained herein. Technical speci cations, appearances and other information are subject to change without notice. All trademarks are the property
of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of MUSIC Group IP Ltd.
© MUSIC Group IP Ltd. 2015 All rights reserved.