HOG 86
The incremental
for highest demands
HeavyDuty
encoder
Extremely robust.
Failsafe in any environment
The solid, extremely sturdy housing with minimum 10 mm wall
thickness is a prerequisite design benefi t in reliable encoder operation. Special anti-corrosion coating ensures seawater resistance in
compliance with C4 protection. Additional encapsulation will keep
the electronics safe against dirt, soiling and humidity even while the
connection cover is opened for installation.
Protected against bearing damages
Insulated bearings or optional hybrid bearings safely compensate
inductive shaft currents and prevent the electronics from damage by
voltage impacts up to 2,5 kV. Hybrid bearings excel by their outstanding service life of 100 000 hours.
Safe at extreme temperatures
The encoder reliably endures temperatures from -40 to +100 °C in
long-term operation.
Capable of high shaft loads
Large, high-quality dual ball bearings compensate high radial and
axial shaft loads and will ensure ultimate longevity thanks to their
high load reserve potential.
Defying any environment
Specialised housing encapsulation and shaft seals enable longterm
IP 66 protection and will reliably prevent the encoder from damage
caused by penetration of dust, dirt or liquids.
Safe and precise.
Quick installation,
less downtime
The optional Enhanced Monitoring System (EMS) monitors
vital encoder functionalities throughout the entire speed
range, eases error tracing and signifi cantly cuts down
expensive downtime. The multicolor LED provided at the
encoder signals proper encoder supply and output driver
operation as well as encoder signal integrity. The error output reports the encoder activity status. The EMS monitoring
functionality will signal connection errors right away during
installation and reduce commissioning times.
Safe, highly available
signal transmission
Perfect signal quality
High-performance, resilient output drivers ensure top signal
quality over 500 m (TTL) respectively 300 m (HTL) cable
routing.
Proven sensing technique
The interference-immune optical sensing technology by
highly integrated OptoASIC defi es major temperature fl uctuations and harsh ambient conditions for consistently high
signal qualitiy and precise measuring results.
Products with fi ber optic output are ideal when it
comes to reliable signal transmission up to 1500 m
distance - especially in environments with electromagnetic interference.
Encoder with outdoor-capable fi ber optic output
Absolutely reliable signal transmission and quality
by two redundant fi ber optic outputs
Long-distance transmission at minimized wiring
effort
Reduced installation work
The ideal solution in metal and steel processing,
at cranes and lifting platforms, in wind turbines or
very spacious systems
HOG 86 M – redundant
signals for ultimate safety
and availability
Two-channel detection of relative position or rotation speed
using two independent signal outputs will immediately
identify any machine or system error. HOG 86 M hosts two
sensing systems which are fully independent from each other.
As an option, redundant EMS functionality will additionally
monitor the two sensing systems which makes HOG 86 M the
product of fi rst choice in safety-relevant applications.
Optimally installed.
Terminal box
rotatable through
Easy, quick and safe
Four mounting holes provided at front and rear allow for installation right with the torque plate which can be attached to the
front in up to 12 different angular positions.
Choose the connection for the
perfect match:
Radial terminal box
Flange connector
Cable outlet
Fiber optic output
connection by
HeavyDuty
terminal box
Eased installation by preassembled cable
On-site modifi cations not required
Cable outlet rotatable through 180°
Optimum cable routing in any installation
position
Perfect and longterm safe connection
Terminal box
rotatable through
180°
HOG 86 – the
HeavyDuty
reserve capacity.
encoder with
Harsh ambient conditions like in steel plants, at gantry cranes or
vertical lift bridges demand the most of the deployed encoders.
The high mechanical reserve potential will ensure reliable operation. New encoder HOG 86 by Baumer Hübner, previously Hübner
Berlin, is an encoder platform to meet even the highest demands
- thanks to more than 50 years of expertise as market leader in
HeavyDuty
variety, you will always encounter the encoder that is the perfect
match for your application.
Your benefi ts at a glance:
Extremely robust
Quickly installed
Reliable and precise
technology. Unrivalled in robustness and product
Robust design
Dual bearings Insulated
bearings
Interferenceimmune
sensing by
OptoASIC
High-quality
seals IP 66
Fiber optic
interface
High temperatures
Cold climate
HOG 86 product overview.
HOG 86 ML
HOG 86 F
HOG 86 T HOG 86 F HOG 86 K HOG 86 M HOG 86 L HOG 86 ML
Sensing method Optical
Voltage supply
and
output circuit
Output signals K1, K2, K0 and inverted / Error output (only with EMS)
Shaft Non-through hollow shaft, ø12 mm or 16 mm
Connection Terminal box
rotatable through
180°
Pulses per revolution 500 ... 2500
Operating temperature
Operating speed ≤10000 (mechanical)
Protection class IP 66
Insulated bearings /
hybrid bearings as
an option
EMS Optional
Approvals CE, UL, CSA CE, UL
Ex protection II3G Ex nA T4 X (gas), II3D Ex tD IP 66 A22 T135 °C (dust)
-40 ... +100 °C -40 ... +80 °C -40 ... +100 °C -20 ... + 70 °C
5 VDC ±5 %, TTL/RS422, max. 500 m
9 ... 30 VDC, TTL/RS422, max. 500 m
9 ... 30 VDC, HTL/push pull, max. 300 m
Cone shaft 1:10, ø 17 mm / Shaft material: stainless steel
M23-
connector outlet
Cable outlet 2 x terminal box
(redundant sensing
and signal output)
HOG 86 T
9 ... 30 VDC,
LWL1,
LWL2 redundant,
max. 1500 m
Terminal box
with fi ber-optic
interface
9 ... 30 VDC, LWL1,
LWL2 redundant,
max. 1500 m
9 ... 30 VDC, TTL/
RS422, max. 500 m
9 ... 30 VDC,
HTL/push pull,
max. 300 m
Terminal box with
2 redundant fi ber
optic outputs and
terminal box rota-
table through 180°
for HTL/TTL signal
More product information on our
HeavyDuty
encoders is available for download under
www.baumer.com/HOG86 or will be gladly provided by our encoder experts. Contact us.
Find your local partner: www.baumer.com/worldwide
Baumer Group
International Sales
P.O. Box · Hummelstrasse 17 · 8501 Frauenfeld
Phone +41 52 728 1122 · Fax +41 52 728 1144
sales@baumer.com · www.baumer.com
Subject to modifi cation in technic and design.
08/13 No. 11113807
Loading...