4gb05183.fm Page 1 Friday, June 4, 2004 5:41 PM
GB WAK 1200 EX/4 PROGRAMME GUIDE
This washing machine is equipped with
automatic safety functions
at an early stage and react appropriately, e.g.:
A. “Water Tap closed” indicator
Check your washing machine’s water supply.
B. “Door Locked” indicator
which detect faults
A
C
B
D
E
F
G
H
C. “Start/Pause” button
D.“Start Delay” button
E. Programme sequence indicator
{
F. Temperature selection buttons
G. “Speed Reduction“ button
H. Operation indicators
Programme
Cotton
Bomull
Synthetics
Syntetisk
Daily Mixed
Dagligvask
Delicates
Finvask
Wool
Ull
Rapid wash
Hurtig
Handwash
Håndvask
Rinse + Spin
Skylling + Sentrif.
Spin
Sentrifugering
Gentle spin
Kort Sentrifugering
Drain
Tømming
Max.
load
Care
Labels
Slightly to normally soiled bed linen, table linen
and underwear, towels, shirts etc. made of cotton
and linen.
Slightly to normally soiled blouses, shirts and
other outer clothing made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or cotton
blends.
Slightly to normally soiled textiles made of cotton
and/or synthetic fibres.
Curtains and delicate dresses, skirts, shirts and
blouses.
Only woollens with a felt-free finish, labelled with
the woolmark and identified as machine
washable.
Lightly soiled outer garments and sportswear
made of cotton, polyester, polyamide and cotton
blend.
Textiles made of linen, silk, wool or viscose
marked as “handwashable”.
––
––
––
Type o f wash /
Degree of soiling
Kg
6.0
2.5
3.0
1.5
1.0
3.0
1.0
6.0
6.0
1.5
––––––
Detergent and
Additives
Softe-
Main
ner
❉
❉
❉
❉
❉
❉
❉
❉
Pre-
wash
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
❉❉❉ ❉ ❉ ❉ ❉
❉❉❉ ❉ ❉❉
–
❉❉❉
–
–
–
––
–––
–––
Start
delay
Utsatt
oppstart
❉
❉
❉
❉
❉
❉
❉
❉
Selectable special options =
Pre-
wash
Forvask
–
––
––
––
–
–––
–––
–––––––
❉
Intensive
rinse
Intensiv
Skylling
Rinse
hold
Skylle-
Stop
Speed
reduction
Sentrif.
1)
Easy
ironing
Stryke-
lett
❉
❉❉❉❉
–
❉❉
❉❉
❉❉
❉❉
❉
❉❉
1)
1)
–
–
–
2)
–
–
❉
1)
❉
––
––
Tem pe-
rature
20 t o 9 5 1200
20 t o 6 0 1000
30 t o 6 0 1200
20 t o 4 0 1000
20 t o 4 0 1000
20 t o 6 0 1200
20 t o 3 0 400
Max.
spin
speed
°C rpm
20 1200
1200
1000
Notes
“Prewash” can be additionally selected for
heavily soiled laundry.
“Prewash” can be additionally selected for
1)
heavily soiled laundry.
In this programme, selection of the special
options “Prewash” and “Eco” is not
possible. In this programme the spin speed
should be adapted to the fabrics.
1)
If you select “Rinse Hold” do not leave
1)
items to soak for too long.
–
–
If you select “Rinse Hold” do not leave
2)
items to soak for too long. A very gentle
spin is used in this programme.
Same as the spin cycle in the “Cotton”
programme.
In this programme spinning is intensive.
Same as the spin cycle in the “Cotton”
programme.
A very gentle spin is used in this
1)
programme. Same as the spin cycle in the
“Wool” programme.
This programme only drains (alternative
method of terminating the programme
after “Rinse Hold” without spinning). In
addition all running programmes can be
cancelled with this programme.
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
5019 401 05183
4gb05183.fm Page 2 Friday, June 4, 2004 5:41 PM
CONSUMPTION DATA
Programme Tem pera t ure
Cotton 95 6.0 54*** 1.90 1:55
Cotton 60 6.0 49 1.14 2:20
Cotton 40 5.0 47 0.70 2:00
Synthetics 60 2.5 55 0.70 1:30
Synthetics 40 2.5 50 0.50 1:15
Daily Mixed 40 3.0 48 0.55 1:00
Delicates 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:40
Rapid wash 30 3.0 37 0.40 0:30
Handwash 30 1.0 45 0.40 0:35
Consumption values
*
programme duration
** The
conditions and to adapt the programme run time accordingly.
*** T o reduce
the water out.
the water temperature
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the booklet.
1. Turn the
programme selector knob
direction to the desired programme.
The remaining time display shows the duration
of the chosen programme (in hours and
minutes) and the pilot lamp above the
button is flashing.
Pause”
2. The programme sequence indicator and the
indicator with the maximum possible spin speed
light up.
3. The temperature can be altered by pressing the
or
“+”
button under the corresponding LED
“-”
display.
SELECT SPECIAL OPTIONS The indicator lights go on.
“Prewash” button
•Only for heavily soiled laundry (for example
sand or granular dirt). Programme duration is
increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This additional option is particularly suitable for
areas with very soft water , for washing baby linen
*
Load
(°C)
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
may also vary from the chart values. The washing machine is able to allow for particular household
, some cold water is added at the end of the main wash cycle, before the pump drains
(kg)
Water
(l)
Energy
(kWh)
“Rinse Hold” button
• The laundry remains in the last rinse water
without being spun: discoloration of the laundry
and additional creasing are prevented.
in any
• This additional option is particularly
recommended for the programme “Synthetics”
or “Delicates”.
• This additional function is particularly useful if
“Start/
you want to postpone spinning to a later time.
The programme has reached the “Rinse
Note:
Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the “
Start/Pause
” button again.
“Speed Reduction“ button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• If the spin speed "0" is selected, the final spin is
cancelled. The water is only drained out.
and helping people with detergent allergies.
Programme duration **
approx.
(hours : minutes)
“Easy Ironing” button
• To lessen creasing, the water quantity is increased
and the clothes are spun very gently at reduced
power. This makes your laundry significantly
damper at the end of the programme.
START DELAY
The “Start Delay” allows to run the machine at the
consumer's convenience, for example at night when
electricity is cheaper.
• Press the “Start Delay” button. Select the
programme start from 1 to 19 hours ahead by
pressing the button again.
•Press the
“Start/Pause”
button. The Start
Delay indicator light flashes until the programme
starts.
• During programme start the remaining time
appears in the digital display.
“Start Delay” correction.
• Before the "Start Delay" has been started:
The preset number of hours can be altered by
continuously pressing the “Start Delay” button.
The number of hours can be reduced by first
turning the programme selector switch to the
“Off” position. Then set the programme again
and select the desired number of hours.
• After the "Start Delay" has been started:
The preset number of hours can be reduced by
pressing the “Start Delay” button again. To increase
the number of hours preselected, first turn the
programme selector switch to the “Off” position.
Then set the programme and the additional options
again and select the desired number of hours.
PROGRAMME START
After you have selected the programme and the
additional option, the indicator light over the
“Start/Pause”
start the programme by pressing the
Pause”
button flashes. Turn on the tap and
“Start/
button. Now the indicator light above the
button goes on.
In addition, all programme phases are indicated by
the associated lights. After the end of a programme
phase the associated indicator light goes out. Thus
the programme sequence indicator moves from left
to right across the wash, rinse and spin phases. At
the end of the programme only the “End” indicator
is still on.
DOOR LOCKED
In the first 15 minutes after the start of the “Cotton”
and “Synthetics” programmes the door can be
opened to add further laundry. This is not possible if
"Rapid Wash" is selecte.
PROGRAMME END
• The remaining time display shows "0:00" and the
"End" indicator lights up.
1. Turn the programme selector knob to the "Off"
position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the
“Start/Pause”
button to interrupt the
programme. The indicator light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the
“Start/Pause”
button again to restart
the programme.
•If you are in the “Prewash” programme step this
additional option can not be deselected as
described (to do this see “Cancel/Delete
Programme).
CANCEL/DELETE PROGRAMME
1. Press the
“Start/Pause”
button to interrupt the
programme. The indicator light flashes.
2. Set the programme selector to “Drain”. The spin
speed
and the remaining time “2 minutes”
“0”
are displayed.
3. Press the
“Start/Pause”
button to start the
“Drain” programme.
5019 401 05183
Black process 45.0° 100.0 LPI