Barco F70 User Manual

F70-series Quick Start Guide

General

Projector Main Components and interfaceProjector Main Components and interface

LED status light

Adjustable feet.

Projector lens.

Lens holder.

WARNING!

Class 1 Laser RG2 Product. For North America, Class 3R up to TR 2.5

This Projector may become RG3.

Refer to user manual before operating Do not stare into beam. This projector has class 4 laser cluster. Do not attempt to disassemble or modify this projector.

LED Status LightLED Status Light

IR receiver: For receiving remote control signals

LCD panel.

Keypad: Used for local operations on the projector.

Connector panel: Control and communication interfaces for the projector.

Front USB and Triggerboard.

Printed on FSC certied paper (www.fsc.org)

Red light indicates a failure. Contact service representative.

601-0427-00

F70-series Quick Start Guide

KeypadKeypad

3 4

General

LCD Screen. Displays the current projector status and source connections.

Navigation Panel. Navigation arrows (up, down, left, right). Conﬁrm selection.

( )

Turn On Screen Display (OSD) menu ON / OFF.

Power On/Standby

Undo action / Back to previous screen

Deactivate the OSD. Only critical warnings will be displayed.

Select input source. Menu appear on OSD or in LCD display. Use Navigation Panel to select and conﬁrm

Open / Close lens shutter.

Activate test pattern. Menu appear on OSD or in LCD display. Use Navigation Panel to select and conﬁrm.

Control & communication connectionsControl & communication connections

DMX: DMX512 Input

RS-232: 9- pin DB9 Connector

Sync: BNC Sync Port IN/OUT; Bidir mini-DIN

Trigger: 12VDC - 0,5A (6W)

9 8

RC: XLR connector for wired remote

USB: Usb 2.0 type A, 4 pin

LAN: Standard RJ45 connector

DP: Standard Display port

Activate Lens Function. Use navigation keys to manage and conﬁrm actions.

DL-DVI-D: Dual DVI-I 1.0 (DVI_D Functionallity)

HDMI: Standard HDMI 2.0

HDBaseT: Standard RJ45 8P8C Connector

SDI: SDI connector with Barcolink Support

+ 2 hidden pages