Banner LED Spot Lights User Manual
LED..SM Series Spot Lights
0 122986 8
LED Spot Lights for Use with PresencePLUS® P4 Sensors
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineer-
ing.com.
• Low-cost, compact washdown spot lights for PresencePLUS® sensors.
See Banner’s Web site (www.bannerengineering.com) for a complete lighting tutorial.
• Continuous or strobed operation is selectable via sensor software.
• Solid-state LED; adjustable spot size (see Specifications on page 1).
• Direct connection to PresencePLUS P4
• Standard 1/4 - 20 thread mounting hole, compatible with camera mounting
bracket knuckle.
Models
Model Color Ambient Light Filter Kit
LEDRSM Visible Red, 620-630 nm FLTR
LEDWSM Cool White, 5500-8300 K FLTB or FLTG
LEDBSM Blue, 465-485 nm FLTB
LEDGSM Green, 520-535 nm FLTG
Specifications
Light Source
LED; see Models table for wavelengths
Illumination
High-intensity spot light
Supply Voltage and Current
Voltage supplied by PresencePLUS sensor: 10-30V dc
@360mA max.
Connections
2 m (6.5') attached pigtail with 3-wire, 8 mm Pico-style
connector
Construction
Black anodized aluminum, glass lens
Environmental Rating
IEC IP67
Spot Size Relative to Distance
Distance 152 mm (6") 305 mm (12")
Useful Life
50,000 hours (LED ON time). When operated within
specification, output will decrease less than 30% after
50,000 hours.
Operating Conditions
-40° to +50° C ( -40° to +122° F)
90% @ 50° C (non-condensing) max. rel. humidity
Cleaning Instructions
Regularly remove any dust, dirt, or fingerprints from the
light source.
1. Blow off dust using anti-static compressed air.
2. If necessary, use a lens cloth and lens cleaner or
window cleaner to wipe off remaining debris. Do
not use any other chemicals for cleaning.
Spot Size 76.2 mm (3") min. 178 mm (7") max. 127 mm (5") min. 305 mm (12") max.
P/N 122986 rev. C 2/25/2011
LED..SM Series Spot Lights
Dimensions
Installing the Spot Light
NOTE: Before installing this spot light, install an ambient light filter behind the sensor lens. The filter improves
image quality by reducing unwanted ambient light.
Sensing Shiny Surfaces: To eliminate direct reflections without using polarizing filters, angle the light approximately 15° (or
more) from perpendicular to a shiny surface.
Accessory Mounting Brackets
Spot light's standard 1/4 - 20 thread mounting hole is compatible with camera mounting bracket knuckle.
Model Description
SMBPPK3 3" Column, Base, and Knuckle Kit
SMBPPK6 6" Column, Base, and Knuckle Kit
SMBPPK Mounting Bracket Knuckle
SMBPPKB Mounting Bracket Base
Model Description
SMBPPKE3 Mounting Bracket Knuckle 3" Extension
SMBPPKE6 Mounting Bracket Knuckle 6" Extension
SMBPPLK 2" Mounting Knuckle Assembly
Warranty: Banner Engineering Corporation warrants its products to be free from defects
for a period of one year. Banner Engineering Corporation will repair or replace, free of
charge, any product of its manufacture found to be defective at the time it is returned to
the factory during the warranty period. This warranty does not cover damage or liability
for the improper application of Banner products. This warranty is in lieu of any other
warranty either expressed or implied.
Loading...