Banner EZ-ARRAY User Manual

EZ-ARRAY™

Measuring Light

Screen

• Two-piece design with integrated

electronics eliminates the need for a

controller

• Resolution of 5 mm and 2,5 mm for

edge guiding, allowing high precision

detection

• Sensing distance ranges from

400 mm up to 4 m

• Measuring heights range from

150 mm up to 1800 mm in 150 mm
increments to cover all configurations

• Visual aspects feature:

- 3-LED status indication

- 3-digit display giving advanced
diagnostics

- 7-segment bar graph for
alignment and blocked zone
indication

EZ-ARRAY™

• Multiple output options:

- x2 digital (PNP & NPN)

- x2 analogue
(4-20 mA or 0-10 VDC)

- Serial Modbus communication

• Robust aluminium housing with
metal end caps and M12x1 connector

(standard); brackets and T-nut slots

allow flexible mounting

• Convenient configuration through

DIP-switch setup or included software

allows advanced settings

Solving complex applications
using simple set-up

Box Profiling

Tyre Sorting

Objective: Measure height, length and width of boxes for

storage and collect profile information for shipping.
Description: The boxes pass through vertical, horizontal

or perpendicular mounted EZ-ARRAY pairs to determine
where the proper storage location should be.

3-Digit

Diagnostic

Display

Bi-Colour

Zone

Indicators

Dip Switch
Configuration

Alignment/
Blanking

System Status

Modbus Activity

Modbus Error

M12x1 Connector

Objective: Determine tyre size on a conveyor.
Description: The outer and inner diameter of each tyre is

determined. The controller determines if the tyre is one of
two required sizes, and directs it down the corresponding
conveyor. If the tyre is found to be of neither size, it is sent
to a reject bin.

Log Diameter

Included software contains
more advanced settings

Authorised distributor:

Objective: Determine the diameter of a log before it has
entered a station used for bark removal.

Description: An EZ-ARRAY determines the diameter of
the log by the total number of beams blocked, to adjust the
log grippers and bark removing blades for process stability.

SAFETYSENSORS VISION

BANNER ENGINEERING EUROPE

Park Lane, Culliganlaan 2F
1831 Diegem • Belgium

Tel: [phone]
Fax: [phone]

E-mail: [e-mail]

Web: www.bannereurope.com

E-A080 – 01/2007