Baldor SUL50204SM Product Information Sheet
Product Information Packet
SUL50204SM
2HP,1725RPM,1PH,60HZ,180TY,XPNV,V1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: SUL50204SM - 2HP,1725RPM,1PH,60HZ,180TY,XPNV,V1
Part Detail
Revision: A Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: A00096A A 002 CD Diagram: Mfg Plant:
Mech. Spec: Layout: 066930-701 Poles: 04 Created Date: 11-14-2018
Base: Eff. Date: 01-14-2020 Leads:
Specs
Catalog Number: SUL50204SM
Enclosure: XPNV
Frame: 180TY
Frame Material: Iron
Output @ Frequency: 2.000 @ 60 HZ
Voltage @ Frequency: 230 V @ 60 HZ
115 V @ 60 HZ
XP Class and Group: CLI GP C,D
XP Division: Not Applicable
Agency Approvals: UL
CSA
CCSA US
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Current @ Voltage: 14.4 A @ 230 V
28.8 A @ 115 V
Design Code: L
Duty Rating: CONT
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
IP Rating: NONE
KVA Code: J
Lifting Lugs: Standard Lifting Lugs
Motor Type: M
Mounting Arrangement: V1
Product Family: Pump - Centrifugal
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Shaft Rotation: Fixed Opposite Standard
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Drip Cover: No Drip Cover
Thermal Device - Winding: Normally Closed Thermostat
Page 2 of 13
Product Information Packet: SUL50204SM - 2HP,1725RPM,1PH,60HZ,180TY,XPNV,V1
XP Temp Code: T3C
Page 3 of 13
Product Information Packet: SUL50204SM - 2HP,1725RPM,1PH,60HZ,180TY,XPNV,V1
Nameplate 000613007MN
CAT NO SUL50204SM SPEC NO. S18-A000-0292
HP 2.0 AMPS 14.5 VOLTS 230 DESIGN L
FRAME SIZE 180TY RPM 1725 HZ 60 AMB 40 SF 1.15
D.E. BRG. 50BC02JPP30A PH 1 DUTY * INSUL F
O.D.E. BRG. 25BC02JPG30A TYPE CS ENCL TENV CODE J
POWER FACTOR NEMA-NOM-EFF
MAX CORR KVAR GUARANTEED EFFICIENCY
NEMA NOM/CSA QUOTED EFF @ 100% LOAD
SER.NO. MOTOR WEIGHT LBS.
*15 MIN IN AIR ;SUB. IN
SEWAGE / WATER ONLY MAXDEPTH
IN MANUAL
Page 4 of 13
Loading...