Product Information Packet
SUL50104SM
1HP,1730RPM,1PH,60HZ,180TY,XPNV,V1
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
Product Information Packet: SUL50104SM - 1HP,1730RPM,1PH,60HZ,180TY,XPNV,V1
Part Detail
Revision: A Status: PRD/A Change #: Proprietary: No
Type: AC Elec. Spec: A00082D N 007 CD Diagram: Mfg Plant:
Mech. Spec: Layout: 066930-701 Poles: 04 Created Date: 11-09-2018
Base: Eff. Date: 01-14-2020 Leads:
Specs
Catalog Number: SUL50104SM
Enclosure: XPNV
Frame: 180TY
Frame Material: Iron
Output @ Frequency: 1.000 @ 60 HZ
Voltage @ Frequency: 230 V @ 60 HZ
115 V @ 60 HZ
XP Class and Group: CLI GP C,D
XP Division: Not Applicable
Agency Approvals: UL
CSA
CCSA US
Base Indicator: Rigid
Bearing Grease Type: Polyrex EM (-20F +300F)
Current @ Voltage: 16.2 A @ 115 V
8.10 A @ 230 V
Design Code: L
Duty Rating: CONT
Heater Indicator: No Heater
Insulation Class: F
Inverter Code: Not Inverter
IP Rating: NONE
KVA Code: L
Lifting Lugs: Standard Lifting Lugs
Motor Type: M
Mounting Arrangement: V1
Product Family: Pump - Centrifugal
Pulley End Bearing Type: Ball
Pulley Face Code: Standard
Shaft Rotation: Reversible: Connected OPP STD
Shaft Slinger Indicator: No Slinger
Speed Code: Single Speed
Motor Standards: NEMA
Starting Method: Direct on line
Drip Cover: No Drip Cover
Thermal Device - Winding: Normally Closed Thermostat
Page 2 of 13
Product Information Packet: SUL50104SM - 1HP,1730RPM,1PH,60HZ,180TY,XPNV,V1
XP Temp Code: T3C
Page 3 of 13
Product Information Packet: SUL50104SM - 1HP,1730RPM,1PH,60HZ,180TY,XPNV,V1
Nameplate 000613007MN
CAT NO SUL50104SM SPEC NO. S18-A000-0287
HP 1 AMPS 8.10 VOLTS 230 DESIGN _
FRAME SIZE 180TY RPM 1730 HZ 60 AMB 40 SF 1.15
D.E. BRG. 50BC02JPP30A PH 1 DUTY 15MIN INSUL F
O.D.E. BRG. 25BC02JPG30A TYPE CS ENCL TENV CODE L
POWER FACTOR NEMA-NOM-EFF
MAX CORR KVAR GUARANTEED EFFICIENCY
NEMA NOM/CSA QUOTED EFF @ 100% LOAD
SER.NO. MOTOR WEIGHT LBS.
FINAL CONN VOLTAGE = 230 *15
MIN IN AIR ;SUB. IN SEWAGE /
WATER ONLY MAXDEPTH IN MANUAL
Page 4 of 13