Baldor RSP1441A Product Information Sheet

Product Information Packet

RSP1441A

.25HP,1725RPM,1PH,60HZ,48,3411S,OPEN,F1

Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.

Product Information Packet: RSP1441A - .25HP,1725RPM,1PH,60HZ,48,3411S,OPEN,F1

Part Detail

Revision: H Status: INA/A Change #: Proprietary: No
Type: AC Elec. Spec: 34WGR054 CD Diagram: CD0763 Mfg Plant:
Mech. Spec: 34M234 Layout: 34LYM234 Poles: 04 Created Date: 05-16-2013
Base: RS Eff. Date: 12-01-2017 Leads: 5#18

Specs

Catalog Number: RSP1441A
Frame: 48
Frame Material: Steel
Output @ Frequency: .250 HP @ 60 HZ
Synchronous Speed @ Frequency: 1800 RPM @ 60 HZ
Voltage @ Frequency: 115.0 V @ 60 HZ
XP Division: Not Applicable
Agency Approvals: UR

CSA
Auxillary Box: No Auxillary Box
Auxillary Box Lead Termination: None
Base Indicator: Resilient
Bearing Grease Type: Polyrex EM (-20F +300F)
Blower: None
Current @ Voltage: 4.300 A @ 115.0 V
Drip Cover: No Drip Cover
Duty Rating: CONT

Locked Bearing Indicator: No Locked Bearing
Motor Lead Quantity/Wire Size: 5 @ 18 AWG
Motor Lead Exit: Terminal Panel Or Lead Hole
Motor Lead Termination: None
Motor Type: 3411S
Mounting Arrangement: F1
Power Factor: 64
Product Family: General Purpose
Pulley End Bearing Type: Ball
Pulley Face Code: Resilient Mount
Pulley Shaft Indicator: Standard
Rodent Screen: None
RoHS Status: ROHS COMPLIANT
Shaft Extension Location: Pulley End
Shaft Ground Indicator: No Shaft Grounding
Shaft Rotation: Reversible: Connected Standard
Shaft Slinger Indicator: No Slinger

Electrically Isolated Bearing: Not Electrically Isolated

Speed Code: Single Speed

Page 2 of 10

Product Information Packet: RSP1441A - .25HP,1725RPM,1PH,60HZ,48,3411S,OPEN,F1

Feedback Device: NO FEEDBACK
Front Face Code: Resilient Mount
Front Shaft Indicator: None
Heater Indicator: No Heater
Insulation Class: B
Inverter Code: Not Inverter
KVA Code: P
Lifting Lugs: No Lifting Lugs

Motor Standards: NEMA
Starting Method: Direct on line
Thermal Device - Bearing: None
Thermal Device - Winding: None
Vibration Sensor Indicator: No Vibration Sensor
Winding Thermal 1: Automatic Thermal Overload
Winding Thermal 1 Location: SB
Winding Thermal 2: None

Page 3 of 10