Page 1
Box Includes:
Glider Board
Instructions
1 Glider Board
Glider Board
WARNING: Always secure seat recline
strap to recline clamp before using
the Glider Board.
1 Insert wheel axle into the hole on the
underside of the Glider Board. The
wheel is secure when you hear it click.
Repeat on other side.
2 Slide ratchet straps between the lower
support bar and the brake rods.
4 Press ratchet lock tab
and slide ratchet strap
through opening.
5 Push ratchet strap through
until snug. Repeat on
3 Place attachment brackets onto lower
support bar.
To Adjust Glider Board Angle:
1 Push the safety cover away from the tabs.
2a To Raise: Squeeze tabs on right and
left side of Glider Board and pull up.
2b To Lower: Squeeze tabs on right and
left side of Glider Board and push down.
3 Pull the safety cover back over the tabs.
WARNING: Always ensure the safety covers are covering the adjustment tabs prior to use.
NOTE: GLIDER BOARD MUST BE PARALLEL TO THE GROUND BEFORE USE.
Depending on your stroller model, you may need to adjust the angle.
other side.
Page 2
To Adjust Glider Board Length:
1 Pull handle on the rear- underside of
Glider Board.
Storage:
1 Raise Glider Board and unhook storage
straps from underside.
2 Hook storage straps around rear crossbar
of stroller frame.
Glider Board
Instructions (continued)
Pull out to extend. Push in to shorten.
NOTE: When stored, make sure the rear of the Glider Board
is not interfering with the back of the stroller seat. Adjust
Glider Board length for storage if necessary.
NOTE: The stroller may be folded with the Glider Board in
the storage position. The Glider Board wheels must be
removed prior to folding the stroller.
To Remove Glider Board:
1 Press ratchet lock tab and
pull ratchet strap out. Unclip
attachment brackets.
WARNING: Always make sure
storage straps are fastened
to the underside of the Glider
Board before use.
To Remove Wheels:
1 Press wheel release
button and gently pull
on wheel to remove.
WARNING: Always make sure the ratchet straps are securely tightened before use.
WARNING: Total weight load recommended for Glider Board is 45 lbs.
The sample product shown in this manual may differ slightly from your production quality Glider Board.
However, this will not affect the assembly or functionality of your Baby Jogger product.
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com
Loading...