Baby Jogger CITY SELECT SECOND SEAT KIT User Manual

City Select Second Seat Kit

Instructions

1 From the front of, and facing the stroller, remove right front mounting bracket plug by
firmly pressing the black button located above the front wheel and pulling up on the plug.
Repeat on left side.

2 Insert right Adaptor Bracket into the right mounting bracket until it clicks into place.
Repeat on left side.

NOTE: The Adaptor Brackets are labeled with an L or R for your convenience.

This Kit Includes:

1 City Select Seat
2 Adaptor Brackets

Adaptor Brackets

WARNING: Always
remove child from
seat before removing
seat from frame.

The sample product shown on this manual

may differ slightly from your production

quality City Select Second Seat Kit. However,

this will not affect the assembly or

functionality of your Baby Jogger product.

3 Align mounting brackets
on the second seat with
the top of the Adaptor
Brackets.

4 Insert seat onto Adaptor
Brackets until it clicks
into place.

To Remove the City Select Second Seat: When Rear Facing:

To make room for the
seat’s footwell: Unzip the

1 Remove child from seat. Press grey buttons on seat
mounting brackets and pull up until the seat detaches.

2 Press silver button on right Adaptor Bracket and pull
upwards. Repeat on left side.

NOTE: Replace mounting bracket plugs when
second seat is not in use.

right front and left front
portions of the basket.

8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227

T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com

NOTE: Your City Select Second Seat Kit can

also be used facing the rear of the stroller.

To adjust the footwell:

Press both buttons on the
side of the footwell and
pull footwell upwards.