Aztech WL559E Product Datasheet

WL559E

Aztech WL559E Wall-Plugged 300Mbps

Wi-Fi Repeater

About the product:

Aztech 300Mbps Wall-plugged Wireless-N Repeater, WL559E enables users to gain Wi-Fi access freely environment by picking up existing wireless signals from router or access point and bouncing o to other areas that experience unstable or inconsistent wireless coverage. The sleek and elegant design seamlessly integrates into any home environment without the sight of messy wiring or cabling.

Wall-Plugged Wi-Fi Repeater

Wi-Fi Repeater in Any Wall Outlet at Home or Oce

Aztech WL559E is the latest Wi-Fi repeater model that follows WL556E, the rst Wi-Fi repeater designed with an in-built power adapter. Unlike Wi-Fi repeaters that require an external power supply adapter, the innovative wall-plugged design empowers users to plug it directly into any available power outlet.

Robust 300Mbps Wireless-N Speed

300Mbps Wireless-N speed ensures faster wireless connection between devices. MIMO technology provides better overall coverage against weak Wi-Fi or Wi-Fi dead spots and enables users to stream multiple HD content wirelessly from Internet-enabled TVs, game consoles and media players without lag.

Dynamic RSSI for Intelligent Guidance to the Best Possible Wi-Fi Spot!

Received Signal Strength Indicators (RSSI) are LED indicators that intelligently determine the wireless signal strength received from the router. By reading the number of illuminated LED indicators, users can assess if the area that Aztech WL559E is plugged into is the recommended location for best Wi-Fi coverage. For example: A single illuminated LED indicates that the area where Aztech WL559E is plugged into has weak Wi-Fi coverage. The user should then plug the Wi-Fi repeater to another available wall outlet. Two LED indicators show recommended Wi-Fi coverage while three LED indicators suggest excellent coverage.

Wi-Fi Protected Setup (WPS) Button for Fast and Easy Installation

Users can automatically add Aztech WL559E to their existing network by pressing the WPS button located at the top of the product. Simply press the WPS button for approximately 5 seconds and within a span of 2 minutes, press the router’s WPS button for 2 seconds. An intuitive web interface allows a step-by-step guide in the set-up process.

Key Benets:

. Repeats wireless signal for improved Wi-Fi coverage . Plug directly into wall outlet . Easy and hassle-free set-up . Intelligent RSSI indicators for best Wi-Fi spot

Product views:

Wi-Fi Protected Setup button for simple pairing

WEAK

Bottom viewTop view

RECOMMENDED EXCELLENT

Reset

Ethernet port

Maximum wireless signal rate derived from IEEE Standard 802.11g and draft 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate.

Head Office

AZTECH TECHNOLOGIES PTE LTD.

31 Ubi Road 1, Aztech Building Singapore 408694 Tel: (65) 6594 2288 Fax: (65) 6749 1198

Hong Kong Office

AZTECH SYSTEMS (H.K) LTD.

Rooms 2-10, 3rd Floor, Core Building 1 No. 1Science Park East Avenue HongKong Science Park Shatin,New Territories, Hong Kong Tel: (852) 2757 1177 Fax: (852) 2753 0578

Malaysia Office

AZ-TECHNOLOGY SDN BHD.

Unit 719 Block A Kelana Business Centre No. 97, Jalan SS7/2 Kelana Jaya 47301 Petaling Jaya Selangor Darul Ehsan, Malaysia Tel: (60)(3) 7804-8450 Fax: (60)(3) 7804-8457

China Office

AZTECH COMMUNICATION DEVICE (DG) LTD.

Jiu Jiang Shui Village, Chang Ping Town Dong Guan City, Guang Dong Province, China. Tel: (86)(769) 8393-6688 Fax: (86) (769) 8393-1138

USA Office

AZTECH LABS, Inc.

4005 Clipper Court, Fremont CA 94538, U.S.A. Tel: (1)(510) 683-9800 Fax: (1)(510) 683-9803

www.aztech.com

Germany Office

AZTECH SYSTEMS GmBH.

Kreuzberger Ring 22, 65205 Wiesbaden Germany. Tel: (49)(0) 611-45020-0 Fax: (49)(0) 611-45020-100

Repeat Your Wireless Coverage

ROOM 1

ROOM 2

Internet

Modem Fiber or ADSL/Cable Router

LED Colour Behaviour

Notebook

Wireless range from router

Tablet

iPhone®/Android®

Extended wireless range

1. GREEN *LED should be ON if WL559E is connected to Router and RSSI value is equal to HIGH. *LED should be OFF while WL559E is booting up. *LED should be OFF while WL559E is doing WPS authentication.

2. GREEN *LED should be ON if WL559E is connected to Router and RSSI value is greater than or equal to MID. *LED should be OFF while WL559E is booting up. *LED should be OFF while WL559E is doing WPS authentication

3. GREEN *LED should be blinking if WL559E is NOT connected to any Router. *LED should be ON if WL559E is connected to Router and RSSI value is greater than or equal to LOW. *LED should be OFF while WL559E is booting up. *LED should be OFF while WL559E is doing WPS authentication.

Specications

Protocol/Standards

Network Support OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless

Security Support

Platform Support

Power Requirements Supply voltage range: 100VAC – 240VAC (50/60 Hz) Power Consumption : Less than 4W Max Current : 0.12A

External Connectors

Hardware

Dimension

AMBER *LED should be ON during boot up. After fully bootup, LED will OFF. *LED should be blinking for 2 mins once WPS button is pressed. *LED should stop blinking and ON for 5 secs when WPS authentication is successful. Then LED should be OFF. *LED should be OFF if WL559E is connected to Router.

Wireless IEEE802.11b/g/n Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab

IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11b: CCK, QPSK, BPSK

Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)Wireless Frequency Band

Wireless: 64/128-bit WEP, WPA, WPA2

Key Chipset: Ralink RT3352 Network Processor + WLAN Controller SPI FlashRom: 4M Byte (Default) DDR2 DRAM: 64M Byte

OS Independent with TCP/IP protocol installed

1 x RJ45 for 10/100Base-T LAN 1 x Factory Default Reset Button 1 x WPS button 2 x Internal antennas

105(L) x 58 (W) x 42 (H) mm

160 gWeight

Operating : 0 o to 40 o Celsius(32 o to 104 o Fahrenheit) Non-Operating :-25 o to 70 o Celsius(-13 o to 158 o Fahrenheit)Temperature

Operating : 30% to 90% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)Humidity