Aztech WL559E Quick Start Manual
Easy Start Guide
WL559E | Wall-Plugged 300Mbps Wifi Repeater
Plug in the WL559E repeater to the power outlet.
Switch on the power outlet.
Connect the ethernet cable to the WL559E repeater and
to the computer.
A
B
C
Launch the internet browser from your computer.
You will be redirected to the WL559E repeater’s user
interface. (If in any case it doesn’t, type http://10.0.10.254
in your internet browser and then hit Enter.
Choose SSID (Wireless Network Name) from the list and
click
to connect.
Input the Wireless Password for the network and click
on Apply.
A
B
C
Disconnect the ethernet cable from the computer and
the WL559E repeater.
Place the WL559E repeater between the wireless router
and the blind spot.
STEP 3
Connect your wireless devices to the WL559E repeater’s
wireless network.
STEP 4
A
STEP 1 Hardware Setup
Place the WL559E Repeater Between
Wireless Router and the Blind Spot
STEP 2
Connecting the WL559E to the
Wireless Network
Connect Your Wireless Devices
to the Repeater
A
B
The WL559E repeater will connect to the wireless network
and will redirect to the user interface with the following
status.
Assess and identify the areas in your house
where the wireless reception from your main
router is weak or no wireless signal. Place the
WL559E repeater between the wireless router
and the point of weak wireless signal. It is
ideal for the WL559E repeater to be placed in
a location, where it can receive good wireless
signal from the wireless router.
SMART LED Indicator
(Determines the signal strength of the wireless router)
Throughput vs Wireless Coverage
WL559 Wireless N
Repeater
Package Contents
Resource CD
Ethernet Cable (RJ45)
Easy Start Guide
Wireless reception and throughput may vary according to the number of wireless clients that
are in use at the same time, other nearby wireless devices, structure type, building materials
and other interference present.
!
Important: Please turn-off / disable any wireless client on
your computer before you proceed with Step 1
Loading...