AXIS 24607R1 User Manual

Camera Housing

This document is an addendum to the Camera
Housing & Accessories Operating Instructions and

describes how to connect power to the AXIS 221
installed in the outdoor housing. Please read
through both instructions carefully before
proceeding with the installation.

Camera housing with AXIS 221 installed

Follow the instructions in the Camera Housing &
Accessories Operating Instructions to install the

Axis network camera.

Follow these instructions to connect power to the
camera:

Connect the supplied cable from the power connector
in the camera housing (1,3) to the connector on the
back of the camera (2,4).

2

4

4

2

No. Color Description

Black Power connector GND (-)

1

Black Camera GND (-)

2

Red Power connector DC Power (+)

3

Red Camera DC Power (+)

4

3

1

This description applies to the following articles:

Item Part no.

VT Power Supply OHEPS19 0217-011

VT Verso Housing HPV42K1A000 0217-001

AXIS 221 Network Camera 0221-0xx

Important!

Make sure that the + and - wires are connected correctly. If not,
the camera may be damaged when power is applied.

2005 Rev 1.00 Part no. 24607

Powering

the

AXIS 221 Network Camera

in a Videotec Verso

Outdoor Housing