Avermedia DVB-T STB5, DVB-T STB7 User Manual
AVerMedia® DVB-T STB5/STB7
User’s Manual
www.avermedia.com
English
Deutsch
Français
Italiano
Español
Português
FCC NOTICE
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial,
industrial or business environment. This equipment can generate, use and radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUTION ON MODIFICATION S
To comply with the limits for the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be
installed in computer equipment certified to comply with the Class B limits. All cables used to connect the computer and
peripherals must be shielded and grounded. Operation with non-certified computers or non-shielded cables may result in
interference to radio or television reception.
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to
operate the equipment.
CE NOTICE
This is a Class B product.
DISCLAIMER
No warranty or representation, either expressed or implied, is made with respect to the contents of this documentation, its
quality, performance, merchantability, or fitness for a particular purpose. Information presented in this documentation has
been carefully checked for reliability; however, no responsibility is assumed for inaccuracies. The information contained
in this documentation is subject to change without notice.
In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the
use or inability to use this product or documentation, even if advised of the possibility of such damages.
TRADEMARKS
AVerMedia are registered trademarks of AVerMedia TECHNOLOGIES, Inc. IBM PC is a registered trademark of
International Business Machines Corporation. Macintosh is a registered trademark of Apple Computer, Inc. Microsoft is
a registered trademark and Windows is a trademark of Microsoft Corporation. All other products or corporate names
mentioned in this documentation are for identification and explanation purposes only, and may be trademarks or
registered trademarks of their respective owners.
COPYRIGHT
© 2005 by AVerMedia TECHNOLOGIES, Inc. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without
the written permission of AVerMedia TECHNOLOGIES, Inc.
Table of Contents
Chapter 1 Introduction................................................................1
1.1 What’s in the package ....................................................1
Chapter 2 Identifying Each Part..................................................2
2.1 Touch Buttons ................................................................2
2.2 Front Panel .....................................................................2
2.3 Rear View.......................................................................3
2.3.1 Connecting the Power Adapter ............................................. 3
Connecting a VGA Monitor or LCD Porjector ................. 3
2.3.2
Connecting the PC ................................................................... 4
2.3.3
Connceting a PC’s Audio....................................................... 4
2.3.4
Connecting the External Speaker.......................................... 5
2.3.5
Connecting the VHF/UHF Antenna..................................... 5
2.3.6
Connecting the TV Set or VCR ............................................ 5
2.3.7
Connecting the TV Set or Video Device............................. 6
2.3.8
Chapter 3 Using AVerMedia® DVB-T STB5/STB7...................7
3.1 Making Configuration....................................................7
3.1.1 Basic Operation ....................................................................... 7
3.1.2 First Time Setting Wizard..................................................... 7
3.2 Introducing Main Menu.................................................8
3.3 Introducing Main Icons..................................................9
3.4 Remote Control..............................................................9
Chapter 4 OSD Menu Settings....................................................12
4.1 Program Manager ..........................................................12
4.1.1 Channel Scan ........................................................................... 12
4.1.2 Editing...................................................................................... 13
4.1.3 Electronic Program Guide(EPG) ......................................... 15
4.1.4 View Program Lists................................................................ 15
4.2 User Settings..................................................................15
4.2.1 Set your Preference................................................................. 16
4.2.2 Parental Lock ........................................................................... 16
4.2.3 Change the Password ............................................................. 17
4.2.4 PIP Mode ................................................................................. 17
(※This function is only for AVerMedia
®
DVB-T STB7)
4.3 System Settings..............................................................17
4.3.1 System Setup............................................................................ 17
4.3.2 First Time Setting Wizard......................................................18
4.3.3 Restore to Default....................................................................18
4.4 Game............................................................................. 18
4.4.1 Gomoku......................................................................................18
4.4.2 OXO............................................................................................19
4.4.3 Dragonet.....................................................................................19
4.5 Information ................................................................... 19
4.6 Timer............................................................................. 19
LIMITED WARRANTY............................................................ 20
User’s Manual
Chapter 1 Introduction
Thank you for purchasing the AVerMedia® DVB-T STB5/STB7. This product can turn
your VGA monitor or LCD projector into a digital terrestrial TV or radio boom box
with or without turning on your computer. Above all, to operate this device, no
software driver is required.
1.1 What’s in the package
AVerMedia
®
DVB-T STB5/STB7 package contains the following items:
Vertical Stand
AVerMedia
®
DVB-T STB5/STB7
User’s Manual
English Deutsch Français Italiano Español Português
Power Adapter
1
Remote Control
（Batteries included）
Audio Cable
VGA Cable
AVerMedia® DVB-T STB5 / STB7
Chapter 2 Identifying Each Part
2.1 Touch Buttons
Touch buttons on the top panel of the product provides quick access to
frequently-used functions.
No. Button Function
2
3
4
1 POWER Turns on/off the
device
2 SOURCE Toggles between live
TV/Radio broadcasts
and computer
graphics.
3 VOLUME Increases (UP) or
decreases (DOWN)
the volume.
4 CHANNEL Goes to the preceding
(UP) or succeeding
(DOWN) program.
2.2 Front Panel
12
No. Description
1 Headphone Jack. By plugging in mini stereo mini jack, you can listen
to the audio with headphone.
2 The LED Indicator lights when the DVB-T STB5/STB7 is turned
on.
3 Infrared Sensor. When using the remote control, please aim it at
the Infrared Sensor.
2
3
User’s Manual
2.3 Rear View
The ports allow connecting to your TV antenna, PC, VGA monitor, LCD projector,
speakers, video, or S-Video source etc. (For more information, please see description
below.)
2.3.1 Connecting the Power Adapter
English Deutsch Français Italiano Español Português
Connect the power adapter to the power jack of AVerMedia® DVB-T STB5/STB7 and
the power outlet. AVerMedia
®
DVB-T STB5/STB7 will be automatically turned on.
Power Outlet
Power Adapter
2.3.2 Connecting a VGA Monitor or LCD Porjector
Connect the product’s VGA OUT port to a VGA monitor or LCD projector.
VGA / LCD Monitor
LCD Projector
3
AVerMedia® DVB-T STB5 / STB7
2.3.3 Connecting the PC
To share the VGA monitor with a PC, or to work on the PC and enjoy the digital terrestrial
programs at the same time (Press the SOURCE button on the front panel or the TV/PC
button on the remote control), you should attach the AVerMedia
the PC. Connect the product’s VGA IN port to the PC's VGA output port using the supplied
VGA cable.
®
DVB-T STB5/STB7 to
VGA Cable
VGA Port
IBM compatilbe PC
2.3.4 Connceting a PC’s Audio
Connect the product’s jack marked as to the PC’s LINE OUT or SPEAKER
jack.
Audio Jacks
on your PC
Audio Cable
IBM Compatible PC
4
2.3.5 Connecting the External Speaker
Connect the external speakers to the jack marked as .
2.3.6 Connecting the VHF/UHF Antenna
Attach the aerial or indoor VHF/UHF TV antenna to the ANT. IN port.
TV Antenna
()
75
Ω
User’s Manual
Speaker
English Deutsch Français Italiano Español Português
2.3.7 Connecting the TV Set or VCR
For receiving analog signal, you can connect TV antenna cable to the product’s
ANT. IN port and also connect your cable between the product’s ANT. OUT and
your TV Antenna In or VCR RF In.
Te le vi si on
AN T. In / R F In
VCR
(Not supplied)
RF Cable
5
AVerMedia® DVB-T STB5 / STB7
2.3.8 Connecting the TV Set or Video Device
You can connect the AVerMedia® DVB-T STB5/STB7 to the TV set or any video
input device, such as a VCR, for viewing digital terrestrial programs. There are two
ways to make the connections: A/V (RCA) jacks or S-Video port. S-Video port
delivers better picture quality than composite A/V jacks.
Composite AV (RCA) connection
(Yellow)
AV (RCA) Cable
(Not Supplied)
(White)
(Yellow)
(Red)
(White)
(Red)
INPUT
VIDEO
AUDIO (L)
AUDIO (R)
Tel ev is io n
Use the “N/P” switch
to select the NTSC
or PAL system.
S- Video connection
If you connect to the TV set, you need to switch to the appropriate video mode to
access the digital TV/Radio programs. For instructions on changing the video mode,
refer to your TV’s user manual.
S-Video Cable
(Not supplied)
6
INPUT
S-Video
Television
Use the “N/P” switch
to select the NTSC
or PAL system.
User’s Manual
Chapter 3 Using AVerMedia® DVB-T STB5/STB7
3.1 Making Configuration
If this is your first time to use AVerMedia® DVB-T STB5/STB7, you need to scan
channels to get locally active channels. Before scanning, it is very important to
understand how to enter menu or set up some basic configurations first. For more
information, please refer to the description below.
3.1.1 Basic Operation
Before entering the menu, keep in mind that the current selection is highlighted with
YELLOW color in the menu. Refer to the following steps for how to enter and
change the menu settings.
1. To enter the OSD menu, press the MENU button on the remote control, and you
will see six main menus on the screen.
2. Press
▲ or ▼ to select the desired main menu and press LIST/OK or ► to
enter the sub menu.
English Deutsch Français Italiano Español Português
3. Press
4. Press MENU or LIST/OK on the remote control to save the change and exit the
5. To return to real-time TV, press EXIT repeatedly.
6. The icon like this
▲ or ▼ again to select the setup item you want. To change the original
settings such as Country or Language, Press ◄ or ► to switch between the
preset options.
current page.
appeared on the screen represents the red button, yellow
button, green button, blue button, or some gray button such as MENU on the
remote control.
3.1.2 First Time Setting Wizard
If this is your first time to use AVerMedia
Wizard dialog box will appear. Follow the instruction on the screen to scan channels
and do some basic configurations.
Note : If you exit this setup page by accident, first press MENU on the remote
control, choose “System Setting”→ “First Time Setting Wizard”, and then you
can enter this page again.
1. To
start the “First Time Setting Wizard”, press ◄ or ► on the remote control to
select YES and press LIST/OK.
®
DVB-T STB5/STB7, the First Time Setting
7
AVerMedia® DVB-T STB5 / STB7
2. Press ◄ or ► to choose your Country and Language. Then select Next and
press LIST/OK.
3. If you want to setup user’s preference, select YES and press LIST/OK.
4. Next, press ▲ or ▼ to select the desired setup item such as “Menu Color”,
“Transparent Level”, “Border Pattern” and so on (For more details, please refer
4.2.1 Setup your Preference) and press ◄ or ► to change the setting. Finally,
select Next and press LIST/OK.
5. Select YES if you want to start searching program automatically. Or select NO
or BACK to exit the current setup page.
6. The “Automatic Search” box will appear, indicating the scanning percentage,
channel number and frequency. When scanning, active TV/Radio programs will
be listed inside the box. After channels are scanned, the syatem will return to
the real-time program automatically. To terminate the scanning, press “EXIT”.
3.2 Introducing Main Menu
After completing basic configuration and scanning, you can press Menu to evoke
main menu including “Program Manager”, “User Settings”, “System Settings”,
“Game”, “Info”, “Timer”. This section will briefly introduce main menu, sub menu and
setup item. For more details, please refer to Chapter 3.
Main Menu
Program Manager
User Settings
System Settings
Game
Info
Time r
Program Editing Sort by Name
Sort by Service ID Sort by Program No.
EPG
TV Program List Radio Program List
List
Transition Style
Program Lock
Change PIN
This function is only for AVerMedia DVB-T STB7
System Setup
First Time Setting Wizard
Default
GomokuGomoku
OXO
Dragonet
Calendar
Product Info
Sleep Timer
Display Type
( )
Program Control
Regional Setting
8
User’s Manual
3.3 Introducing Main Icons
The following table explains the meanings of main icons when using the device.
Icon Description Icon Description
Attention
The button on the remote
control doesn’t work for this
model.
Mute
The device delivers the
audio of PC by the
external speaker or the
headphone.
No signal or no programs.
The device delivers the
audio of programs by the
external speaker or the
headphone.
The resolution and the
frequency (Hz) of your PC
monitor cannot support the
The device delivers the
audio of PC by audio
output.
PIP feature.
This program is locked
(Parental Lock).
The device delivers the audio
of programs by audio output.
Tips for remote control
buttons.
3.4 Remote Control
The accompanying remote control allows you to switch between various TV/Radio
channels, adjust the volume, change the OSD menu settings, switch between PC
graphics and digital terrestrial broadcasts, etc.
23
1
English Deutsch Français Italiano Español Português
2
20
15
14
18
17
16
22
21
19
13
12
3
4
5
6
7
8
9
10
11
9
AVerMedia® DVB-T STB5 / STB7
No. Button Function
1 POWER Turn on / off the device
2 Numeric
Buttons
! Enter the channel number or the teletext page number.
! Enter the password for locked channels.
3 CH RTN Return to the previously selected channel.
4 MENU ! TV Mode：Enter the OSD menu.
! OSD Menu：Save the setting.
5 LIST/OK ! TV Mode：Enter the menu of TV or Radio Program List.
! OSD Menu：Confirms the selection.
6 Vol◄/► ! TV Mode：Increase / Decrease the volume
! OSD Menu：Enter or exit the sub menu.
! PIP Mode：Move the PIP small screen by using the
arrow buttons (※This function is only for AVerMedia®
DVB-T STB7).
7 EXIT Exit the current menu, dialog box, setup page or OSD menu.
8 PIP Enter the PIP mode, allowing simultaneous display of both
the PC graphics and digital terrestrial programs. (※This
function is only for AVerMedia® DVB-T STB7).
9 TV/PC Toggle between live TV/Radio broadcasts and computer
graphics.
10 PREVIEW Display 9 consecutive TV programs on the screen. Under
this mode,you can switch between all programs and
favorite programs by pressing FAV.
11 AUTOSCAN Scan programs automatically.
12 FAV ! If you have set any favorite program, you can switch
between these programs.(For more information, please
refer to “OSD Menu setting”)
! If you want to set or cancel favorite programs, go to that
program first, and press FAV for more than one second.
13 TXT The “TELETEXT” function is not available for this product.
14 SLEEP(red
button)
15 AUDIO/LANG
TV Mode：Set the time to turn off the device or cancel this
function.
TV Mode：Set audio mode and language.
(blue button)
10
User’s Manual
16 MUTE(green
TV Mode：Turn on / off the sound.
button)
17 PIP Move PIP Mode : This button can turn on/off the PIP-positioning
mode. When turned on, you can move the PIP screen by
18 SUBTITLE
using the arrow buttons (▼!◄ ► ). (※This function is only
for AVerMedia
The “SUBTITLE” function is not available for this product.
®
DVB-T STB7)
(yellow button)
19 EPG View EPG information.
20 CH ▲/▼ ! TV Mode：Go to next or previous program.
! OSD Menu：Function as the UP and DOWN arrow button.
! PIP Mode：Move the PIP screen by using the arrow
buttons (※This function is only for AVerMedia® DVB-T
STB7).
21 INFO Display the current program information.
22 TV/RADIO Switch between TV and Radio programs.
23 PC BGM/RES. AVerMedia
! This button lets you switch between the live audio of
®
DVB-T STB5:
digital terrestrial programs and PC audio when
connecting to TV and computer at the same time.
AVerMedia
! TV Mode：This button lets you switch among various
®
DVB-T STB7:
VGA resolutions.（1280×1024、1280×768、4:3、
PANORAMA、640×480、800×600、1024×768）
! PC Mode：This button lets you switch between the live
audio of digital terrestrial programs and PC audio when
connecting to a TV set and a computer at the same time.
English Deutsch Français Italiano Español Português
Important Info for PIP Mode:
PIP mode supports common VGA modes only. To have the PIP mode work properly,
make sure your computer’s VGA resolution and frequency are configured according
to this table.
Resolution Frequency (Hz)
640 x 480 60, 72, 75, 85
800 x 600 60, 72, 75, 85
1024 x 768 60, 70, 75, 85
1280 x 1024 60
11
AVerMedia® DVB-T STB5 / STB7
Chapter 4 OSD Menu Settings
The product provides a menu for users to set up both basic and advanced
configurations including “Program Manager”, “User Settings”, “System Settings”,
“Game”, “Info” and “Timer”. This chapter will briefly introduce each menu item. For
instructions on the operation in the OSD menu, refer to 3.1.1 Basic Configuration.
4.1 Program Manager
On the “Program Manager” page, three
items will be listed on the screen. In this
page, you can delete unwanted programs,
set favorite programs, change the program
order and so on.
4.1.1 Channel Scan
Main Menu
Program Manager
User Settings
System Settings
Game
Info
Time r
In this page, you can choose “Automatic
Search”, “Manual Search” or “All Frequency Search” to scan channels. It is strongly
recommended to use “Automatic Search” or “All Frequency Search” to search for
the active channels unless you are quite familiar with local digital terrestrial
frequencies and bandwidth.
Note: It is necessary to do channel scan when you use the product for the first time.
Otherwise, no digital terrestrial channels are accessible. During the scanning,
do not press any button to avoid any potential problems.
Automatic Search:
1. Press MENU to enter the menu. Choose “Porgram Manager” → “Search” sub
page.
2. Select “Automatic Search” and a warning
message will appear. If you want to overwrite
the previous program list, selelct YES.
Otherwise ,select NO. To abort this operation,
simply select CANCEL.
Automatic S earch
Progress
Channel No.
Frequency
TV Li st Radio List
TTV
CTV
3. The “Automatic Search” box will appear,
indicating the scanning percentage, Channel
Munber and Frequency. When scanning, active
TV/Radio programs will be listed inside the box. After channels are scanned,
the syatem will return to the real-time program automatically. To terminate the
scanning, press “EXIT”.
Manual Search：
If there are any channels missing after auto scan, or you want to add new programs,
you can choose to manually scan the desired channels as long as you have got the
correct frequency and bandwidth data.
12
User’s Manual
1. Press MENU to enter the menu. Choose “Porgram Manager” → “Search” sub
page.
2. On the “Manual Search” page, select “Frequency” and “Bandwidth” and press
the numeric button or
frequency and bandwidth. Then press LIST/OK.
Note : If the certain frequency carries programs, the figures at the bottom of this
page will show the percentage of strength and quality.
3. After selecting “OK” and pressing LIST/OK, the system will begin to manually
scan channels.
4. When the channel scanning is completed, the system will return to “Manual
Search” page and bring you back to the program you are watching earlier.
5. Repeat steps 1 to 3 if you want to scan more channels.
All Frequency Search：
You will never miss any channels by using “All Frequency Search”.
1. Press MENU to enter the menu. Choose “Porgram Manager” → “Search” sub
page.
2. Select “All Frequency Search” and a warning message will appear. If you want
to overwrite the previous program list, selelct YES. Otherwise, select NO. To
abort this operation, simply select CANCEL.
3. The “All Frequency Search” box will appear, indicating the scanning percentage
and frequency. All Frequency search may take you a while, please be patient.
4. After channels are scanned, the syatem will return to the real-time program
automatically. To terminate the scanning, press “EXIT”.
▲/▼ on the remote control to specify the correct
English Deutsch Français Italiano Español Português
4.1.2 Editing
You can setup your favorite programs, place programs in proper order, delete
programs and so on.
Setup your Favorite Porgram：
When completing setting, you can acess your favorite programs quickly and easily
by pressing FAV on the remote control.
1. Press MENU to enter the menu. Choose
“Porgram Manager” → “Editing” sub page.
2. Select “Program Editing” and the “Program Edit
Table” will appear.
3. Press
▲/▼ to highlight your favorite program
and press LIST/OK on the remote control. The
mark
! will appear, indicating that the
Program edit table
No . Program Name
TTV
TTV-NEWS
TTV-LIFE
PTS
PTS-NEWS
FTV
FTV-EDUCATION
FTV-NEWS
CTV
CTV-NEWS
Pg Dn
Del
Favor Move
Pg Up MENU:Save
13
AVerMedia® DVB-T STB5 / STB7
program has been selected as your favorite one. To abort the selection, press
LIST/OK again to make the mark
4. Repeat step 3 to mark more programs. Press Menu to save your setting and
exit the current page.
5. Surely, you can use FAV button on the remote control to setup your favorite
programs. For more details, please refer to 3.4 Remote Control.
Change Program Sequence：
1. Press MENU to enter the menu. Choose “Porgram Manager” → “Editing” sub
page.
2. Select “Program Editing” and the “Program Edit Table” will appear.
3. Press
4. Press ! or # until the desired location is highlighted. Then the marked
5. Press Menu to save your setting and exit the current page.
Delete Programs：
1. Press MENU to enter the menu. Choose “Porgram Manager” → “Editing” sub
▲/▼ to highlight the program that you want to move and press LIST/OK
on the remote control. The mark
been selected for moving. To abort the selection, press LIST/OK again to make
the mark
program will be moved to the new location.
page.
" disappear.
! disappear.
" will appear, indicating that the program has
2. Select “Program Editing” and the “Program Edit Table” will appear.
3. Press
4. Repeat step 3 to mark more programs. Press Menu to save your setting and
Sort programs：
With this function, you can sort programs by name, service ID, program number.
1. Press MENU to enter the menu. Choose “Porgram Manager” → “Editing” sub
2. Select the way of sorting you like and the program will be rearranged
▲/▼ to highlight the program that you want to delete and press LIST/OK
on the remote control. The mark
has been selected for deletion. To abort the selection, press LIST/OK again to
make the mark
exit the current page.
page.
automatically.
" disappear.
" will appear, indicating that the program
14
User’s Manual
Item
Description
Sort by Name Sort by ascending program names.
Sort by Service
ID
Sort by service ID.
Note：Service ID is officially used to verify “channel service”
(which is so-called “Programs”). Basically, different channel
service will be identified with different numbers.
Sort by Program
No.
Sort by Program Number.
Note: When scanning, the system will give every channel service
a number, which we called “Program No.”
4.1.3 Electronic Program Guide(EPG)
Electronic Program Guide (EPG) is a service that allows you to check the next
succeeding program schedule and even the program schedules of the whole week.
Please be noted whether EPG service is provided or not depends on the channel
providers in your region/country.
1. Press MENU to enter the menu. Choose “Porgram
Manager” → “EPG” sub page.
2. In the “EPG” page, the EPG of the selected program
lists inside the blue box located at the lower right
corner of the screen (as shown at right).
3. Press
4. Press
▲/▼ to select a program and press LIST/OK.
► to move the highlight in the blue pane. Press LIST/OK and then you
TV Program List
No.
Program Name
TTV
TTV-NEWS
TTV-LIFE
PTS
PTS-NEWS
FTV
FTV-EDU.
FTV-NEWS
CTV
2005/01/01 01:10
Pg Dn Pg Up
can see the program guide on that day.
Note：In this setup page, the button
◄/► can only move the highlight but cannot
adjust volume.
5. You can also see the program guide by pressing the EPG button on the remote
control. For more information, please refer to 3.4 Remote Control.
4.1.4 View Program Lists
1. Press MENU to enter the menu. Choose “Porgram Manager” → “List” sub page.
2. Select “TV Program List” or “Radio Program List”. All programs will be listed in
this page.
English Deutsch Français Italiano Español Português
4.2 User Settings
You can configure your paference setting, enabel/disable the parental lock and
change your password.
15
AVerMedia® DVB-T STB5 / STB7
4.2.1 Set your Preference
You can set the OSD properties, transparent and so on. First press Menu to enter
the menu. Choose “User Settings” → “Preference” setup page and you can see the
items listed in the following table.
Item Description
Menu Color Press ◄ or ► to choose the desired color.
Transparent
Level
Border Pattern Press ◄ or ► to select the deisred border of the OSD menu.
Banner
Timeout
Transition
Style
4.2.2 Parental Lock
You can prevent others from watching some programs such as the adult movie.
1. Press MENU to enter the menu. Choose “User Settings” → “Parental Lock”
setup page.
Press ◄ or ► to set the OSD transparency.（The smaller
number you specify, the more transparent will be the OSD
menu.）
Press ◄ or ► to set the period of the time (in seconds) that OSD
information remains on the screen when switching.
Press ◄or ► to select the desired transition style. Transition
style feature takes effect when the unit has detected the selected
TV or Radio program has no signal. It automatically displays the
preset transition effect on your screen.
2. Select “Program Lock” and select “YES” to enable this feature. Then press
LIST/OK.
3. Next, select “Program Control” and the “Program Control” box will appear.
▲/▼ to highlight the program that you want to lock and press LIST/OK
Press
on the remote control. The mark
has been selected for locking. To abort the selection, press LIST/OK again to
make the mark
4. Repeat step 3 to select more programs.
5. Press Menu to save the setting.
6. From now on, you need to enter your passwaord first before watching that
program, rescanning channels and unlocking the program. Besides, when you
revert to factory settings, remember the default password is 0000 (four zeros).
disappear.
will appear, indicating that the program
16
User’s Manual
4.2.3 Change the Password
1. Press MENU to enter the menu. Choose “User Settings” → “Parental Lock”
setup page.
2. Select “Change PIN” and the “Change Parental
PIN” box will appear.
3. Press the numeric button on the remote conotrl to
enter your old password and specify the new one.
Finally, enter the same new password again for
confirmation.（The default password is 0000 (four
zero)）。
Change Parental PIN
Old PIN
New PIN
Confirm New PIN
OK
English Deutsch Français Italiano Español Português
4.2.4 PIP Mode (※This function is only for AVerMedia
®
DVB-T STB7)
This feature can display the main signal and auxiliary input signal simultaneously so
that you can watch digital TV and work on your PC at the same time.
1. Press PIP on the remote control to enter the PIP mode.
2. If you want to adjust the size of the small screen, please press Menu to enter
the main menu.
3. Select “User Settings” → “PIP Settings”. The system provides “1/4”、”1/9” and
“1/16” for your selection. For instance, when you choose 1/4 PIP mode, the
system displays a 1/4 small screen on the main screen.
Press LIST/OK to save the settings.
4. To adjust the position of the small screen, press PIP Move on the remote
control first. Then you can move the small screen by using the arrow buttons
(
▲/▼ /◄/►)。
Note : Press PIP Move on the remote control again to switch channels or adjust volume.
4.3 System Settings
This feature allows you to set the OSD language, revert to the default settgins and so on.
4.3.1 System Setup
Press MENU to enter the menu. Choose “System Settings” → “System Setup” setup
page. You can select the desired language and change the display aspect ratio.
17
AVerMedia® DVB-T STB5 / STB7
Item Description
Display Type Press ▲ or ▼ to switch among various display aspect ratios (「4：
3 Full Screen」、「4：3 Letter Box」 or 「16：9 Wide Screen」)
Note: If the program or video image is not made in 16:9 format,
you cannot tell the difference of these display aspect ratios.
Regional Setting Press ◄ or ► to select your area, language and time zone.
4.3.2 First Time Setting Wizard
If you exit this setup page at the first time, follow the steps described below. Press MENU
to enter OSD menu. Select “System Settings” → “First Time Setting Wizard”. For more
information, please refer to 3.1.2 First Time Setting Wizard.
4.3.3 Restore to Default
This feature allows you to revert to default factory settings, including the removal of
all TV/Radio channels.
1. Press MENU to entet OSD menu. Select “System Settings” → “Default”
2. If you do want to revert to the factury settings, choose “YES”.
3. A confirmation dialog will appear. Select “OK” and press LIST/OK to confirm
the operation, or select “CANCEL” and press LIST/OK.
4.4 Game
The system also provides simple games so that you can play games when waiting
for programs.
4.4.1 Gomoku
The rule of this game is easy, which is played by two people and each one has his
own colored stone (White or Black). Players alternative turns. Player wins the game
if he is able to put 5 of his pieces in a row, column or diagonal.
1. Press MENU to enter OSD menu. Select “Game” → “Gomoku”.
2. Press
‧ Choose “Move Later” indicates you play against the Set-Top-Box and the
3. Press
4. Now you can start the game.
◄ or ► to make your selection.
‧ Choose “Move First” indicates you play against the Set-Top-Box and you
go first.
‧ Choose “Human” indicates you play with another people.
Set-Top-Box goes first.
◄ or ► again to choose two difficulty levels (“Easy” or “Normal”).
18
User’s Manual
4.4.2 OXO
Get three or in a row, column or diagonal to win the game.
1. Press MENU to enter OSD menu. Select “Game” → “OXO”.
2. Press
3. Press
4. Press LIST/OK on the remote control to start the game.
Note : Check the blue box located at the upper right corner of the screen to see the
4.4.3 Dragonet
The little dragon grows longer by directing it to grab the fire ball. Use the up, down,
left and right button. To win the game, you need to grab 36 fire balls in the “Easy”
level and 48 fire balls in the “Hard” level. Try not to hit the wall or tail for this will
end the game.
1. Press MENU to enter OSD menu. Select “Game” → “Dragonet”.
2. Press
3. Press LIST/OK on the remote control to start the game.
4. To puase the game, press INFO on the remote control. If you want to restart
Note : Check the red and blue boxes located at the left corner of the screen to see
◄ or ► to make your selection.
‧ Choose “Move First” indicates you go first.
‧ Choose “Move Later” indicates the computer goes first.
◄ or ► again to choose two difficulty levels (“Easy” or “Normal”).
scores.
◄ or ► to choose two difficulty levels (“Easy” or “Hard”).
the gaem, press EPG on the remote control.
how many balls the dragon grabs and how many steps it moves.
English Deutsch Français Italiano Español Português
4.5 Information
Item Description
Calendar This feature allows you to access the current date quickly.
System Info Provide the information about this product, such as product name
and firmware version etc.
4.6 Timer
This feature allows you to set the time to turn off the device.
1. Press MENU to enter OSD menu. Select “Timer” → “Sleep Timer”。
2. Press
▲ or ▼ to select the desired time starting from 10 minutes to 120
minutes, increasing by 10 minutes at a time, to turn off the device.
19
AVerMedia® DVB-T STB5 / STB7
LIMITED WARRANTY
AVerMedia TECHNOLOGIES, Inc. warrants this product to be free of defects resulting from faulty
manufacture or components under the following terms:
WARRANTY LENGTH
Labor is warranted for (1) one year from the date of purchase.
Parts are warranted for (1) one year from the date of purchase.
Replacement products will be warranted for the remainder of the one year warranty period or (30)
thirty days, whichever is longer.
WHO IS PROTECTED
This warranty is enforceable only by the first consumer purchaser.
WHAT IS AND IS NOT COVERED
Except as specified below, this warranty covers all defects resulting from faulty manufacturing of this
product. The following are not covered by the warranty.
1. Any product on which the serial number has been defaced, modified, or removed.
2. Damage, deterioration, or malfunction resulting from
A. Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of
nature, commercial or industrial use, unauthorized product modification,
or failure to follow instructions included with the product.
B. Misapplication of service by someone other than the manufacturer’s
representative.
C. Any shipment damages. (Claims must be made with carrier.)
D. Any other causes which does not relate to a product defect.
3. Cartons, cases, batteries, cabinets, tapes, or accessories used with product.
4. AVerMedia
responsibility to determine the suitability of this product for your purpose.
WHAT WE WILL AND WILL NOT PAY FOR
We will pay labor and material expenses for covered items. However, we will not pay for the following:
1. Removal or installation charges.
2. Shipping charges.
3. Any incidental charges.
EXCLUSION OF DAMAGES
THE MANUFACTURER’S SOLE OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPL ACEMENT OF A DEFECTIVE PRODUCT AT OUR OPTION.
THE MANUFACTURER SHALL NOT, IN ANY EVENT, BE LIABLE TO THE PURCHASER OR ANY
THIRD PARTY FOR ANY INCIDENT AL OR CONSEQUENTIAL DAMAG E (INCLUDING, BUT NOT
LIMITED TO, DAMAGES RESULTING FROM INTERRUPTION OF SERVICE AND LOSS OF
BUSINESS) OR LIABILITY IN TORT REL ATING TO THIS PRODUCT OR RESULTING FROM ITS
USE OR POSSESSION.
LIMITATIONS OF IMPLIED WARRANTIES
There are no other oral or written warranties, expressed or implied, including but not limited to those
of merchantability or fitness for a particular purpose. Any implied warranties are limited in duration to
one year from the date of purchase.
STATE LAW AND YOUR WARRANTY
This warranty gives you specific legal rights, and you may also have other rights granted under state
law. These rights vary from state to state.
does not warrant that this product will meet your requirements; it is your
20
FCC-HINWEIS
Dieses Gerät wurde getestet und entspricht den Richtlinien für digitale Geräte der Klasse B nach Teil 15 der FCCBestimmungen. Diese Richtlinien dienen zum Schutz gegen schädliche Einflüsse im geschäftlichen oder industriellen
Bereich. Das Gerät kann Radiofrequenzen erzeugen, nutzen und ausstrahlen und, bei unsachgemäßen Einbau und
Nutzung, die Übertragung von Radiowellen stören. Es gibt keine Garantie dafür, dass in einer bestimmten Konfiguration
keine Störungen auftreten. Sollte dieses Gerät Radio- oder Fernsehempfang stören - was sich durch Ein- und Ausschalten
des Gerätes überprüfen lässt -, wird der Anwender dazu aufgefordert, die Störung durch folgende Maßnahmen zu
beseitigen:
• Empfangsantenne anders ausrichten oder positionieren.
• Entfernung zwischen Gerät und Empfänger vergrößern.
• Gerät an andere Steckdose bzw. anderen Stromkreis als die/den des Empfangsgerätes anschließen.
• Händler oder Radio/TV-Fachmann konsultieren.
Dieses Gerät entspricht Teil 15 der FCC-Bestimmungen. Die Inbetriebnahme geschieht unter den folgenden
Bedingungen: (1) Das Gerät darf keine Störungen verursachen (2) Das Gerät muss empfangene Störungen verkraften,
einschließlich solcher Störungen, die zu Fehlfunktionen führen.
WARNUNG VOR MODIFIKATIONEN
Um den Richtlinien eines digitalen Gerätes der Klasse B nach Teil 15 der FCC-Bestimmungen zu entsprechen, muss
dieses Gerät zusammen mit einer Computerausrüstung genutzt werden, die den Richtlinien der Klasse B entspricht. Alle
Verbindungskabel zu Computer und Peripherie müssen abgeschirmt und geerdet werden. Betreiben mit nicht
zertifizierten Computern oder nicht abgeschirmten Kabeln kann zu Störungen im Radio- und Fernsehempfang führen.
Sämtliche Änderungen und Modifikationen, die nicht ausdrücklich in der Garantie zu diesem Produkt zugelassen sind,
können die Genehmigung zum Betreiben der Gerätes zunichte machen.
CE-HINWEIS
Dies ist ein Produkt der Klasse B.
RECHTLICHER HINWEIS
Keine Garantie, sei es explizit oder implizit, wird übernommen bezüglich des Inhalts dieser Dokumentation, seiner
Qualität, Leistung, Verkäuflichkeit oder Eignung für einen bestimmten Zweck. Die in dieser Dokumentation angegebene
Information wurde sorgfältig auf ihre Zuverlässigkeit hin überprüft; es wird jedoch keine Verantwortung für Fehler
übernommen. Information aus dieser Dokumentation kann ohne vorherige Ankündigung geändert werden.
Keinesfalls ist AverMedia haftbar für direkte, indirekte, besondere, im Zusammenhang stehende oder Folgeschäden, die
sich aus der Benutzung oder Unfähigkeit zur Benutzung dieses Produktes oder dieser Dokumentation ergeben, selbst,
wenn wir auf die Möglichkeit solcher Schäden hingewiesen werden.
WARENZEICHEN
AVerMedia Pro sind eingetragene Warenzeichen von AVerMedia TECHNOLOGIES, Inc. IBM PC ist ein eingetragenes
Warenzeichen von International Business Machines Corporation. Macintosh ist ein eingetragenes Warenzeichen von
Apple Computer, Inc. Microsoft ist ein eingetragenes Warenzeichen und Windows ein Warenzeichen von Microsoft
Corporation. Alle anderen Produkte oder Firmennamen in dieser Dokumentation dienen nur zu Erkennungszwecken und
sind Warenzeichen oder eingetragene Warenzeichen ihrer jeweiligen Firmen.
COPYRIGHT
© 2005 by AVerMedia TECHNOLOGIES, Inc. All rights reserved. Kein Teil dieses Handbuchs darf ohne vorherige
schriftliche Genehmigung von AVerMedia TECHNOLOGIES, Inc. in welcher Form und Weise auch immer kopiert,
übertragen, in einem Retrieval-System gespeichert oder in eine andere Sprache übertragen werden.
Inhalt
Kapitel 1 Einführung .................................................................1
1.1 Lieferumfang .................................................................1
Kapitel 2 Beschreibung der einzelnen Komponenten................2
2.1 Tasten.............................................................................2
2.2 Vorderseite.....................................................................2
2.3 Rückansicht....................................................................3
2.3.1 Anschließen des Netzteils........................................................... 3
2.3.2 Anschließen eines VGA-Monitors oder LCD-Projektors.... 3
2.3.3 Anschließen des PC ..................................................................... 4
2.3.4 Anschließen eines Computer-Audiokabels............................. 4
2.3.5 Anschließen von externen Lautsprechern............................... 4
2.3.6 Anschließen der VHF/UHF-Antenne....................................... 5
2.3.7 Anschließen von Fernsehgerät oder Videorekorder ... 5
2.3.8 Anschließen des Fernsehers oder Videogerätes..................... 5
Kapitel 3 Inbetriebnahme der
AVerMedia
3.1 Konfigurieren.................................................................7
3.1.1 Normaler Betrieb.......................................................................... 7
3.1.2 Einrichtungsassistent ................................................................... 7
3.2 Das Hauptmenü..............................................................8
3.3 Die Haupticons ..............................................................9
3.4 Fernbedienung ...............................................................10
®
DVB-T STB5/STB7...........................7
Kapitel 4 OSD-Menüeinstellungen............................................13
4.1 Programmmanager.........................................................13
4.1.1 Sendersuchlauf.............................................................................. 13
4.1.2 Editieren........................................................................................ 15
4.1.3 Electronic Program Guide(EPG)............................................... 16
4.1.4 Programmlisten einsehen............................................................ 17
4.2 Anwendereinstellungen .................................................17
4.2.1 Individuelle Einstellungen vornehmen.................................... 17
4.2.2 Kindersicherung............................................................................ 18
4.2.3 Passwort ändern............................................................................ 19
4.2.4 PIP-Modus ..................................................................................... 19
(Diese Funktion gibt es nur bei der AVerMedia
®
DVB-T STB7)
4.3 Systemeinstellungen ......................................................19
4.3.1 Systemsetup........................................................................ 20
4.3.2 Einrichtungsassistent.......................................................... 20
4.3.3 Werkseinstellung................................................................ 20
4.4 Spiele .............................................................................20
4.4.1 Gomoku.............................................................................. 20
4.4.2 OXO ................................................................................... 21
4.4.3 Dragonet............................................................................. 21
4.5 Information ....................................................................22
4.6 Timer .............................................................................22
GEWÄHRLEISTUNG ...............................................................23
Anwenderhandbuch
Kapitel 1 Einführung
Wir gratulieren zum Kauf des AVerMedia® DVB-T STB5/STB7. Mit diesem Gerät
wandeln Sie Ihren VGA-Monitor oder LCD-Projektor in einen digital terrestrischen
Fernseher bzw. Radio um – egal, ob der PC ein- oder ausgeschaltet ist. Sie
benötigen keinerlei Softwaretreiber, um dieses Gerät einzusetzen.
1.1 Lieferumfang
In der Schachtel des AVerMedia® DVB-T STB5/STB7 finden Sie:
Standfuß
AVerMedia® DVB-T STB5/STB7
Anwenderhandbuch
English Deutsch Français Italiano Español Português
Netzteil
Fernbedienung
(mit Batterien)
1
Audiokabel
VGA-Kabel
Loading...