A U T O M A T I C T R A N S M I S S I O N R E M O T E S T A R T E R
AS-2510 TW
User Guide
A note concerning the battery inside the transmitter:
Depending on the usage of the transmitter, the battery can last anywhere between 3 to 6 months. When the battery is low, it the transmitter will emit two beeps in a repetitive cycle. At that point you should replace your battery with a new one. That is why we recommend that you keep a spare battery somewhere handy such as the glove compartment.
|
|
|
|
|
|
DOC.1.00 – |
November 5, 2003 |
Gp CA Lp |
Manufactured in Canada by Autostart |
|
|
Table of Contents
Table of Contents ................................... |
2 |
Transmitter Part Number and Serial |
|
Number of the Remote Car Starter |
|
Module .................................................... |
3 |
Introduction ............................................. |
3 |
Using the Remote Control ...................... |
3 |
LCD Remote Functions .......................... |
4 |
Basic Vehicle Operation ......................... |
4 |
Alarm Clock ............................................ |
4 |
Time Adjust Mode................................... |
4 |
Countdown Timer ................................... |
4 |
Parking Countdown ................................ |
5 |
Melody Selection .................................... |
5 |
Vibration Mode........................................ |
5 |
Power Saving Mode................................ |
5 |
Remote Control Finder ........................... |
5 |
LCD Remote Operation .......................... |
5 |
Basic Vehicle Operations........................ |
5 |
Transmitter Mode Selection.................... |
6 |
Alarm and Countdown Adjustments ....... |
6 |
Cold Weather Mode................................ |
6 |
Home ValetTM.......................................... |
7 |
Timing Countdown Adjustment............... |
7 |
Safe Start Mode...................................... |
7 |
LCD Transmitter Operation and |
|
Confirmations.......................................... |
8 |
Vehicle Presets....................................... |
8 |
Driving Off............................................... |
9 |
Using the Remote Car Starter ................ |
9 |
Arming the Starter Kill............................. |
9 |
Idle Mode ................................................ |
9 |
Turbo Mode ............................................ |
9 |
Valet Mode with the Valet Switch ......... |
10 |
Ignition Valet ......................................... |
10 |
“Home ValetTM” Mode ........................... |
10 |
Remote Valet Mode .............................. |
11 |
Panic Mode........................................... |
11 |
Quick LockoutTM.................................... |
11 |
Cold Weather Mode.............................. |
11 |
Advanced Features: Installation- |
|
programmable Options ......................... |
12 |
Remote Door Locks .............................. |
12 |
Priority Door Access ............................. |
12 |
Active or Passive Arming...................... |
12 |
The Starter Kill and the Anti-grind Feature |
|
.............................................................. |
12 |
Horn Chirp Timing................................. |
13 |
Flashing LED ........................................ |
13 |
Safe Start.............................................. |
13 |
Home Valet TM....................................... |
13 |
Ignition-controlled Door Locks .............. |
13 |
Ignition Re-lock ..................................... |
13 |
Secure Lock.......................................... |
13 |
Turbo Mode .......................................... |
13 |
Remote Trunk Release......................... |
14 |
Engine Run Time .................................. |
14 |
Multi-car Operation ............................... |
14 |
Troubleshooting Poor Transmitting Range |
|
.............................................................. |
14 |
AS-2510TW User Guide |
P. 2 |
Transmitter Part Number and Serial Number of the Remote Car Starter Module
The boxes below contain information concerning your transmitter and Remote Car Starter.
We entered the part number of your transmitter for you. Should you need to order a new transmitter, you will need to provide the transmitter part number which is printed below.
The second box contains the serial number of the Remote Car Starter. Please make sure that the installer has entered the serial number in that box.
Transmitter Part Number:
ASTR-LCD-1
Companion Transmitter: ASTR-2144
The installer must use the space below to write the serial number of the Remote Car Starter and the location of the valet switch (if installed):
Serial Number of the Remote Car Starter:
Location of the Valet Switch (if installed):
Introduction
This is a state-of-the-art remote car starter system. The system is packed with advanced features such as priority access to the driver’s door (commodity features) and the Safe Start children safety feature.
This Remote Car Starter features two-way communication, enabling fully graphical command confirmation.
With many an advanced function, this product will satisfy any one your expectations from high-end commodity and security systems, without neglecting any standard feature commonly offered by entry-level starters.
Using the Remote Control
Your Remote Car Starter is equipped with a 5-button multi-channel remote control. It can operate two independent vehicles equipped with a Remote Car Starter (see Multi-Car Operation section, later in this Guide, for second-car transmitter functions).
The functions of the transmitter are as follows:
P. 3 |
User Guide AS-2510 TW |
LCD Remote Functions
The Transmitter offers several command-confirmation and timer features. This section explains some of the key functions available on the Remote Control. Next section gives a summary of the button combinations used to access the functions (see LCD Remote Operation Tables).
Note:
If you wish to exit a function while still in the process of accessing it, simply stop and wait for at least 10 seconds: the Remote Control will return to its normal state.
Basic Vehicle Operation
The vehicle can be remote-started and stopped using the START/STOP (
) button. The
TRUNK (
) button will open the Trunk (if this feature is installed on the vehicle). The LOCK
(
) and UNLOCK (
) buttons will lock and unlock the Doors of the vehicle (if the Remote Door Lock feature is installed on the vehicle) and arm or disarm the Starter Kill (if installed). The FUNCTION (
) button is used to access all advanced functions of the Remote Control. (Refer to the LCD Operation and Confirmations tables.)
Alarm Clock
The LCD Remote Control has a built-in Alarm Clock which can be set up using the 
button. Use the 
and 
buttons to switch the Alarm Clock on and off (refer to the tables).
Time Adjust Mode
Use Time Adjust Mode to set the current time on your Remote Control using the 
button (refer to the tables).
Countdown Timer
This feature allows set up a countdown of a duration entered by the user in hours and minutes using the 
button (refer to the tables).
AS-2510 TW User Guide |
P. 4 |
Parking Countdown
This version of the Countdown feature is particularly useful for keeping track of parking meter time: the user may quickly set up the countdown in slices of 10 or 30 minutes using
the |
|
and |
buttons (refer to the tables). |
|
Melody Selection
The Remote Control allows the user to select which melodies are to be used upon the following events: remote starting of the vehicle, the Alarm, ending of the countdown, entering Cold Weather Mode. Melodies for these various events can be selected using the 
button (refer to the tables).
Vibration Mode
Use this feature to replace audible signals with a vibration signal. Use the 
and 
buttons to switch Vibration Mode ON and OFF (refer to the tables).
Power Saving Mode
When set to Power Saving Mode, the Remote Control will cease polling the Remote Starter Module on a regular basis for status information. This will extend battery life. Use the 
and 
buttons to switch Power Saving Mode ON and OFF (refer to the tables).
Remote Control Finder
This function allows the user to locate the Remote Control when it has been accidentally dropped near the vehicle. Pressing the Valet Button and holding it down for 3 seconds (or until the Parking Lights flash five times) will cause the Remote Control to start beeping for one minute. The beeping will stop by itself after one minute, or it can be switched off by pressing the Lock (
) or the Unlock (
) button on the Remote Control.
LCD Remote Operation
(First Car Control)
NOTE:
The following section explains the functions the Transmitter can provide. If you wish to exit a function while you are accessing it, simply stop and wait at least 10 seconds, the Transmitter will return to normal.
Basic Vehicle Operations
FUNCTION |
BUTTON PRESSED |
ICON |
BUZZER |
INSTRUCTIONS /DESCRIPTION |
|||||
LOCK |
|
|
|
|
1 Beep |
LOCK AND ARM THE STARTER |
|||
|
|
|
|
||||||
|
|
|
|
|
KILL |
||||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
UNLOCK |
|
|
|
|
2 Beep |
UNLOCK AND DISARM THE |
|||
|
|
|
|
||||||
|
|
|
|
STARTER KILL |
|||||
|
|
|
|
|
|
||||
|
|
|
|
|
|
||||
TRUNK OR AUX 3 |
|
|
|
|
1 Beep |
TRUNK OUTPUT |
|||
|
|
|
|
|
|
|
|
|
|
START * |
|
|
|
|
|
|
|
|
|
(See Runtime |
|
|
|
+ |
MELODY |
START THE ENGINE |
|||
Options below) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STOP |
|
|
|
None |
MELODY |
STOP THE ENGINE |
|||
|
|
|
|
|
|
|
|
|
|
Light ON |
|
|
|
ON for 10 seconds |
|
Press |
|
|
once |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
P. 5 |
User Guide AS-2510 TW |
Loading...