Autonics ATN Series Catalog Page
SENSORS
CONTROLLERS
MOTION DEVICES
SOFTWARE
(J)
Temperature
Controllers
(K)
SSRs
(L)
Power
Controllers
(M)
Counters
(N)
Timers
(O)
Digital
Panel Meters
(P)
Indicators
(Q)
Converters
(R)
Digital
Display Units
(S)
Sensor
Controllers
(T)
Switching
Mode Power
Supplies
(U)
Recorders
(V)
HMIs
(W)
Panel PC
(X)
Field Network
Devices
ATN Series
DIN W48×H48mm, Universal Voltage Multi-Function Timer
Features
● Realization of wide range of power supply
:100-240VAC 50/60Hz, 24-240VDC universal,
24VAC 50/60Hz, 24VDC universal, 12VDC
● Various output operation (6 kinds modes)
● Multi time range (16 kinds of time range)
● Wide control time (0.05 sec to 100 hour)
● Easy setting of time, time range, output operation mode
● Easy to check output status by indicator
Please read “Safety Considerations”
in the instruction manual before using.
( €
c'i\lus
Ordering Information
AT 8 N
5A
ᜡ
-1
Power supply
Time operation
Number of plug pins
Item
※
8-pin socket (PG-08, PS-08(N), PS-08) and 11-pin socket (PG-11, PS-11(N)) are sold separately.
No mark 100-240VAC 50/60Hz, 24-240VDC
1 12VDC
2 24VAC 50/60Hz, 24VDC
I I I
Time limit DPDT (2c) or instantaneous SPDT (1c)+Time limit SPDT (1c)
N
selectable by output operation mode
DN Time limit DPDT (2c)
EN Instantaneous SPDT (1c)+Time limit SPDT (1c)
8 8-pin plug type
11 11-pin plug type
AT Analog Timer
Specications
Model AT8N-
Function Multi Function Timer
Control time set ing range
Power supply • 100-240VACᜠ 50/60Hz, 24-240VDCᜡ universal • 24VACᜠ 50/60Hz, 24VDCᜡ universal • 12VDC
Allowable voltage range 90 to 110% of rated voltage
Power consumption
Return time Max. 100ms
Timing operation Power ON Start Signal ON Start
Min. input signal width
Input
Control
output
Relay
life cycle
Repeat error Max. ±0.2% ±10ms
SET error Max. ±5% ±50ms
Voltage error Max. ±0.5%
Temperature error Max. ±2%
Insulation resistance Over 100MΩ (at 500VDC megger)
※
Contact type
Contact capacity
Mechanical Min. 10,000,000 operations
Electrical Min. 100,000 operations (250VAC 5A resistive load)
1: Refer to time specifications for control time setting range by model.
※
1
□ □
0.05 sec to 100 hour
• Max. 4.3VA (100-240VACᜠ),
Max. 2W (24-240VDCᜡ)
• Max. 4.5VA (24VACᜠ),
Max. 2W (24VDCᜡ)
• Max. 1.5W (12VDCᜡ)
-
-
Time limit DPDT (2c) or
Instantaneous SPDT (1c)+
Time limit SPDT (1c)
selectable by output operation mode
250VACᜠ 5A, 30VDC
resistive load
5A
ᜡ
AT11DN-
• Max. 3.5VA (100-240VACᜠ),
Max. 1.5W (24-240VDCᜡ)
• Max. 4VA (24VACᜠ),
Max. 1.5W (24VDCᜡ)
• Max. 1W (12VDCᜡ)
INHIBIT, START, RESET: approx. 50ms
INHIBIT, START, RESET: [No-voltage input]
- Short-circuit impedance: max. 1kΩ, Residual voltage: max. 0 5V,
Open-circuit impedance: min. 100kΩ
Time limit DPDT (2c)
250VACᜠ 5A, 24VDC
resistive load
5A
ᜡ
AT11EN-
□
• Max. 4.3VA (100-240VACᜠ),
Max. 2W (24-240VDCᜡ)
• Max. 4.5VA (24VACᜠ),
Max. 2W (24VDCᜡ)
• Max. 1.5W (12VDCᜡ)
Instantaneous SPDT (1c)+
Time limit SPDT (1c)
250VACᜠ 5A, 30VDC
resistive load
Autonics
ᜡ
N-65
ATN Series
Specications
Model AT8N-
Dielectric strength 2,000VAC 50/60Hz for 1 min
Noise
immunity
Vibration
Shock
Environment
-
1
AT
□□
-
AT
2
□□
AT
□□
Mechanical 0.75mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 1 hour
Malfunction 0.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 min
Mechanical 300m/s
Malfunction 100m/s
Ambient temperature -10 to 55℃, storage: -25 to 65
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
Approval
Accessory Bracket
※
2
Weight
※
2: The weight includes packaging. The weight in parenthesis is for unit only.
※
Environment resistance is rated at no freezing or condensa ion.
□
±500V the square wave noise (pulse width 1㎲) by noise simulator
±2kV the square wave noise (pulse width 1㎲) by noise simulator
2
(approx. 30G) in each X, Y, Z direction 3 times
2
(approx. 10G) in each X, Y, Z direction 3 times
ᜢ ᜧ
Approx. 134.12g (approx. 86.71g) Approx. 132.2g (approx. 85g) Approx. 134.7g (approx. 87.5g)
AT11DN-
I
℃
I I
Connections
AT8N
● When selecting [A], [F]
output operation mode
□
I
AT11EN-
□
● When selecting [A1], [B], [F1], [I]
output operation mode
4
5
3
2
(Time limit 1c) (Time limit 1c)
1
6
7
8
CONTACT OUT:
250VAC 5A,
30VDC 5A
RESISTIVE LOAD
※
1
- +
※1: AC/DC voltage: 100-240VAC 50/60Hz, 24-240VDC
DC voltage: 12VDC
AT11DN AT11EN
ID ID
: 24VAC 50/60Hz, 24VDC
RESET
START
INHIBIT
6
5
4
3
2
7
8
9
10
1
11
CONTACT OUT:
250VAC 5A,
24VDC 5A
RESISTIVE LOAD
(Time limit 1c)(Time limit 1c)
※
- +
1
RESET
START
INHIBIT
4
5
3
2
6
7
81
CONTACT OUT:
250VAC 5A,
30VDC 5A
RESISTIVE LOAD
(Time limit 1c)(Instantaneous 1c)
※
1
- +
6
5
4
3
2
7
8
9
10
1
11
CONTACT OUT:
250VAC 5A,
30VDC 5A
RESISTIVE LOAD
(Time limit 1c)(Instantaneous 1c)
※
- +
1
※1: AC/DC voltage: 100-240VAC 50/60Hz, 24-240VDC
DC voltage: 12VDC
N-66
: 24VAC 50/60Hz, 24VDC
Autonics
Loading...