Autonics ASL Series Catalog Page
ASL Series
-|Transparent setting guide|-
ASL Series
SSR Terminal Block (screwless type)
Features
▣
[Common Feature]
●Selectable between independent and load common output with jumper bar
● High tensile force and easy wiring with one-touch screwless type crimp terminal
●Convenient operating status check with operation indicator (blue LED)
[1-po int]
●Selectable between independent and power ommon input with jumper bar
●DIN Rail mounting
●SSR: [Fujitsu] SN-24A01C
[Omron] 3GMC-202P
[Panasonic] AQG22124, AQG12124, AQZ202D
[4-point]
● Selectable between NPN common and PNP common common input with jumper
bar insulting location
●SSR protection with the cover
●Easy SSR replacement with SSR ejector (except ASL-L04ST0- )
●DIN Rail or screw mounting
●SSR: [Fujitsu] SN-24A01C
[Omron] 3GMC-202P
[Panasonic] AQG22124, AQG12124, AQZ202D
[16-po int]
●SSR protection with the cover
●Easy SSR replacement with SSR ejector
●DIN Rail mounting
●SSR: [Panasonic] AQZ202D
Please read “Safety Considerations” in instruction
manual before using.
Ordering Information
▣
AS 04 SP0L L U N
SSR type
No. of SSR points
Connector type
Terminal type
Model
Varistor installation
Input logic
(except ASL-L1ST0- , ASL-L4ST0- series)
N
Y
U
N
P
MP0
SP0
SP1
SR0
ST0
01
04
16
H
L
L
AS
Not installed
Installed
Universal
NPN
PNP
AQZ202D (panasonic)
AQG12124 (panasonic)
AQG22124 (panasonic)
G3MC-202P (omron)
SN-24A01C (fujitsu)
1-point
4-point
16-point
Hirose
Screwless
Screwless
SSR Terminal Block
A-54
SSR Terminal Blocks
-|Transparent setting guide|-
Crimp Terminal Specication
▣
A
B
C
(unit: mm)
A B C Applicable wire
End Sleeve (ferrule terminal)
crimp terminal
Use cable of copper conductor with temperature class of 60
※
Specications
▣
1-point, 4-point
1-point
Model
4-point
10 to 12.0 ≤ 2.0 ≤ 4.1 AWG22-16 (0.30 to 1.25mm2)
℃.
ASL-L01MP0- N ASL-L01SP0- N ASL-L01SP1- N ASL-L01SR0- N ASL-L01ST0- N
ASL-L01MP0- Y ASL-L01SP0- Y ASL-L01SP1- Y ASL-L01SR0- Y ASL-L01ST0- Y
ASL-L04MP0-UN ASL-L04SP0-UN
ASL-L04MP0-UY
※
1
ASL-L04SP0-UY
- -
※
1
- -
Power supply 24VDCᜡ±10%
Rated load voltage &
※
2
current
Current consumption
60VACᜠ/DCᜡ
50/60Hz 2.7A
※
3
≤ 3mA ≤ 18mA ≤ 10mA
75-240VAC
50/60Hz 1A
ᜠ
75-240VAC
ᜠ
50/60Hz 2A
24-240VAC
50/60Hz 2A
Output type 1a contact SSR output
Applied SSR AQZ202D [Panasonic]
AQG12124 [Panasonic] AQG22124 [Panasonic]
G3MC-202P [Omron]
Terminal type Screwless
Terminal pitch 1-point: 9.0mm (arranging over 2 units)/4-point: 5.0mm
Operation Indicator Blue LED
Applied
cable
Solid wire Ø0.6 to Ø1.25mm (60℃ only)
Stranded wire
※
4
AWG22-16 (0.30 to 1.25mm2) (60℃ only)
Stripped wire length 8 to 10mm
Insulation resistance 1-point: ≥ 1,000MΩ (at 500VDC megger)/4-point: ≥ 1,000MΩ (at 500VDC megger)
Between
Insulation
resistance
coil-contact
Between
same contacts
Vibration
Shock
Environ-
ment
Mechanical 0.75mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Malfunction 0.75mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes
Mechanical 1,000m/s2 (approx. 100G) in each X, Y, Z direction for 3 times
Malfunction 100m/s2 (approx. 10G) in each X, Y, Z direction for 3 times
Ambient temp.
Ambient humi.
Material Terminal block: polyamide 66, conducting plate: brass, case&base: poly phenylene sulde
Accessory Jumper bar: 1, Ejector: 1
2,500VAC 50/60Hz for 1 minute
1,000VAC 50/60Hz for 1 minute
※
5
-15 to 55℃, storage: -25 to 65
35 to 85%RH, storage: 35 to 85%RH
※
6
℃
Protection structure IP20 (IEC standard)
Approval
1-point
※
7
Weight
4-point
※
1: This is for load protection and it is recommend to use at the inductive load.
※
2: This is SSR load capacity when it is resistive load and temperature characteristic curve is satised.
※
3: The current consumption including LED current by one SSR.
※
4: When using stranded wire, use End Sleeve (ferrule terminal) crimp terminals.
※
5: ASL-L01 - Y/ASL-L04 -
※
6: Ejector is supplied only for ASL-L04 - (4-point).
※
7: The weight includes packaging. The weight in parenthesis is for unit only.
※
8: The weight of 1-point unit is per 4 units with packaging and the weight of parenthesis is per 1.
※
Environment resistance is rated at no freezing or condensation.
(approx. 19g)
Approx. 118g
(approx. 65g)
Y (varistor installed type), this is 300VAC.
Approx. 130g
※
8
Approx. 134g
(approx. 20g)
Approx. 122g
(approx. 69g)
Approx. 140g
(approx. 22g)
Approx. 128g
(approx. 75g)
Approx. 148g
(approx. 24g)
Approx. 128g
(approx. 75g)
I/O Termina l Blocks
Inter face
Terminal Blocks
Common
Terminal Blocks
Sensor Co nnector
Terminal Blocks
Relay
Terminal Blocks
I/O Cables
Connec tor Type
Cables
Open Type
Cables
Others
ASL-L04ST0-UN
ASL-L04ST0-UY
ᜠ
24-240VAC
※
1
ᜠ
50/60Hz 1A
SN-24A01C [Fujitsu]
ABS Series
ABL Series
ASL Seri es
Power Relay
SSR
Jumper bar: 1
Approx. 136g
(approx. 21g)
Approx. 126g
(approx. 72g)
A-55
ASL Series
-|Transparent setting guide|-
16-point
Model ASL- H16M P0- N
Input rating voltage 24VDC
Output rating voltage and current
of SSR (ambient temp.)
Current consumption
※1※
※
3
Output type 1a contact SSR output
Applied SSR AQZ202D [Panasonic]
No. of SSR points 16
Terminal type Screwless
Terminal pitch ≥ 7.8 mm
SSR pitch 10mm
Indicator Power indicator: red LED, operation indicator: blue LED
Applied cable
Solid wire Ø0.6 to Ø1.25mm
Stranded wire
Stripped wire length 8 to 10mm
Insulation resistance ≥ 1,000MΩ (at 500VDC megger)
Between
Dielectric
strength
Vibration
Shock
Environ-
ment
coil-contact
Between same
contacts
Mechanical 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
Malfunction 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 10 minutes
Mechanical 1000m/s2 (approx. 100G) in each X, Y, Z direction for 3 times
Malfunction 100m/s2 (approx. 10G) in each X, Y, Z direction for 3 times
Ambient temp. -15 to 55℃, storage: -25 to 65
Ambient humi. 35 to 85%RH, storage: 35 to 85%RH
Material Terminal block, cover: polycarbonate, case/base: modied polyphenylene oxide
Accessory Jumper bar: 2, ejector: 1
Protection structure IP20 (IEC standard)
Approval
※
5
Weight
1: When connecting loads to output part, please connect loads of same power type.
※
Connecting loads of dierent power type may cause safety issues.
2: This value is rated when using the resistive load. Use proper current for the ambient temperature.
※
(Refer to the 'Temperature Characteristic Graph'.)
3: The current consumption including LED current per one SSR.
※
4: When using stranded wire, use End Sleeve (ferrule terminal) crimp terminals.
※
5: The weight includes packaging. The weight in parenthesis is for unit only.
※
Environment resistance is rated at no freezing or condensation.
※
60VAC 50/60Hz or 60VDC
2
2.4A (25℃) or 1.7A (55℃)
≤4mA
※
4
AWG22-16 (0.3 to 1.25mm2)
2,5 00VAC 50/60Hz for 1 minute
1,000VAC 50/60Hz for 1 minute
Approx. 377g (approx. 278g)
℃
A-56
SSR Terminal Blocks
-|Transparent setting guide|-
Dimensions
▣
ASL-L01
9
ASL-L04
-
87
-
I/O Termina l Blocks
39
38.5
● Jumper bar (model: JB-9.0-04L)
※
For the desired application (Power/Load common),
(unit: mm)
Inter face
Terminal Blocks
Common
Terminal Blocks
Sensor Co nnector
Terminal Blocks
Relay
Terminal Blocks
I/O Cables
Connec tor Type
Cables
Open Type
Cables
Others
the jumper bar is sold separately.
4
31
89.8
1.2
6
12.5
0.5
9
4-2.2
2
27
ABS Series
ABL Series
ASL Seri es
Power Relay
SSR
2-Ø5
98
107
SSR Pitch 6.2
5
27
High Temperature Caution
Make sure do not touch the heat sink or
the unit body while power is supplied or
right after load power is turned o. If not,
it may cause a burn.
44.3
● Jumper bar (model: JB-6.0-04L)
※
For the desired application (NPN/PNP/Load common),
the jumper bar is sold separately.
89
92 .1
35.2
21
1.2
4
6
12.5
6
4-2.2
18
0.5
2
A-57
Loading...