AUO P460HVN03.0 Specification

The information contained in this document has been carefully researched and is, to the best of our knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or consequential, resulting from the use of the information provided herein. Our products are not intended for use in systems in which failures of product could result in personal injury. All trademarks mentioned herein are property of their respective owners. All specifications are subject to change without notice.

Datasheet

AUO

P460HVN03.0

UP-02-068

P460HVN03.0 Product Specification

Rev. 0.1

Model Name: P460HVN03.0

Issue Date : 2011/12/29

(＊＊＊＊)Preliminary Specifications

(…)Final Specifications

Customer Signature Date AUO Date

Approved By

_________________________________

Note

Reviewed By PM Director

Michael Goan

____________________________________

Reviewed By RD Director

Eugene CC Chen

____________________________________

Reviewed By Project Leader

Ming Yu Wu

____________________________________

Prepared By PM

Travis Huang

____________________________________

P460HVN03.0 Product Specification

Rev. 0.1

Contents

No

CONTENTS

RECORD OF REVISIONS

1 GENERAL DESCRIPTION

2 ABSOLUTE MAXIMUM RATINGS

3 ELECTRICAL SPECIFICATION

3-1 ELECTRIACL CHARACTERISTICS

3-2 INTERFACE CONNECTIONS

3-3 SIGNAL TIMING SPECIFICATION

3-4 SIGNAL TIMING WAVEFORM

3-5 COLOR INPUT DATA REFERENCE

3-6 POWER SEQUENCE

3-7 BACKLIGHT SPECIFICATION

4 OPTICAL SPECIFICATION

5 MECHANICAL CHARACTERISTICS

5-1 PLACEMENT SUGGESTIONS

6 RELIABILITY TEST ITEMS

7 INTERNATIONAL STANDARD

7-1 SAFETY

7-2 EMC

8 PACKING

8-1 DEFINITION OF LABEL

8-2 PACKING METHODS

8-3 PALLET AND SHIPMENT INFORMATION

9 PRECAUTION

9-1 MOUNTING PRECAUTIONS

9-2 OPERATING PRECAUTIONS

9-3 ELECTROSTATIC DISCHARGE CONTROL

9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE

9-5 STORAGE

9-6 HANDLING PRECAUTIONS FOR PROTECT FILM

9-7 OPERATING CONDITION IN PID APPLICATION

Record of Revision

P460HVN03.0 Product Specification

Rev. 0.1

Version

0.0 2011/12/29

0.1 2012/2/22

21 Correct outline dimension from 1023.68 to 1044.08

Correct outline dimension from 578.27 to 598.67

Correct outline dimension from 14.2 to 9.9

15 Correct input current from 5.27 to 3.24

Correct input power from 126.4 to 77.1

Correct Led qty from 240pcs to 120pcs

6 Correct backlight consumption power from 126.4 to 77.1

Date Page Description

First preliminary spec sheet release

4

Correct thickness from 14.2 to 9.9

P460HVN03.0 Product Specification

Rev. 0.1

1. General Description

This specification applies to the 46.0 inch Color TFT-LCD Module P460HVN03.0. This LCD module has a TFT

active matrix type liquid crystal panel 1,920x1,080 pixels, and diagonal size of 46.0 inch. This module supports

1,920x1080 resolution display. Each pixel is divided into Red, Green and Blue sub-pixels or dots which are

arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 10-bit gray

scale signal for each dot.

The P460HVN03.0 has been designed to apply the 10-bit 2 channel LVDS interface method. The main feature

of P460HVN03.0 would be high brightness, high contrast, wide viewing angle, high color saturation, symmetry

narrow bezel, edge LED backlight and high color depth.

* General Information

Items Specification Unit Note

Active Screen Size 46.0 Inch

Display Area 1018.08(H) x 572.67(V) mm

Outline Dimension 1044.08(H) x 598.67(V) x 9.9(D) mm 1

Driver Element a-Si TFT active matrix

Display Colors 10 bit (8bit+FRC), 1073.7M Colors

Number of Pixels 1,920x1080 Pixel

Pixel Pitch 0.17675 (H) x 0.53025(W) mm

Pixel Arrangement RGB vertical stripe

Display Operation Mode Normally Black

Display Orientation Landscape/Portrait Enable

Surface Treatment AG Haze = 11%

Note:

(1) Dmax: 26.5mm (Front bezel to Driver cover); Dmin: 9.9mm (Front bezel to Bezel back)

P460HVN03.0 Product Specification

2. Absolute Maximum Ratings

The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit

Item Symbol Min Max Unit Conditions

Logic/LCD Drive Voltage Vcc -0.3 14 [Volt] Note 1

Input Voltage of Signal Vin -0.3 4 [Volt] Note 1

Operating Temperature TOP 0 +50 [oC] Note 2

Operating Humidity HOP 10 90 [%RH] Note 2

Storage Temperature TST -20 +60 [oC] Note 2

Storage Humidity HST 10 90 [%RH] Note 2

Panel Surface Temperature PST 65 [oC] Note 3

Note 1: Duration:50 msec.

Note 2 : Maximum Wet-Bulb should be 39 and No condensation.℃

Rev. 0.1

The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures

greater than 40 , the wet bulb temperature must not exceed 39 .

Note 3: Surface temperature is measured at 50℃ Dry condition

℃ ℃

℃

P460HVN03.0 Product Specification

Rev. 0.1

3. Electrical Specification

The P460HVN03.0 requires two power inputs. One is employed to power the LCD electronics and to drive the

TFT array and liquid crystal. The second is employed for LED driver.

3.1.1 Electrical Characteristics

Parameter Symbol

LCD

Power Supply Input Voltage VDD 10.8 12 13.2 VDC

Power Supply Input Current IDD -- 0.9 1.08 A 1

Power Consumption PC -- 10.8 12.96 Watt 1

Inrush Current I

Permissible Ripple of Power Supply Input Voltage (for input power=12V)

Input Differential Voltage

Differential Input High Threshold

LVDS

Interface

Voltage

Differential Input Low Threshold

Voltage

Input Common Mode Voltage

RUSH

VRP -- -- VDD * 5%

∣

V

∣

ID

VTH +100 -- +300 mVDC 4

V

TL

V

ICM

Min. Typ. Max

- - 5.5 A 2

200 400 600 mVDC 4

-300 -- -100 mV

1.1

Value

1.25

Unit Note

mV

1.4

V

pk-pk

DC

3

4

CMOS

Input High Threshold Voltage

Interface

Input Low Threshold Voltage

Backlight Power Consumption PBL --

Life Time(MTTF) -- 50000 -- 8

VIH

(High)

VIL

(Low)

2.7 -- 3.3 VDC

0 -- 0.6 VDC

77.1

W

3.1.2 AC Characteristics

Value

--

Fclk

+3%

200

0.4

0.5

Unit Note

MHz 9

KHz

ns

9

10

LVDS

Interface

Parameter Symbol

Receiver Clock : Spread Spectrum Modulation range Receiver Clock : Spread Spectrum Modulation frequency Receiver Data Input Margin Fclk = 85 MHz Fclk = 65 MHz

Fclk_ss

Fss

tRMG

Min. Typ. Max

Fclk

-3%

30

-0.4

-0.5

7

s

µ

Note :

1. Test Condition:

(1) V

= 12.0V

DD

(2) Fv = Type Timing, 60Hz, 120Hz or Other

(3) F

= Max freq.

CLK

(4) Temperature = 25 ℃

(5) Test Pattern : White Pattern

2. Measurement condition : Rising time = 400us

90%

P460HVN03.0 Product Specification

Rev. 0.1

VVVV

DD

DDDD

GND

GNDGND

10%

400

400400

3. Test Condition:

(1) The measure point of V

is in LCM side after connecting the System Board and LCM.

RP

(2) Under Max. Input current spec. condition.

4. V

= 1.25V

ICM

L V D S -

V

IC M

L V D S +

G ND

|VID|

V

T H

|VID|

V

T L

0 V

|VID|

5. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape,

TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage current

occurs between lamp wire and conducting tape.

6. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At

temperatures greater than 40 , the wet bulb temperature must not exceed 39 . When operate at low

℃ ℃

temperatures, the brightness of LED will drop and the life time of LED will be reduced.

7. The measure points of V

and V

IH

are in LCM side after connecting the System Board and LCM.

IL

℃

P460HVN03.0 Product Specification

Rev. 0.1

8. The lifetime (MTTF) is defined as the time which luminance of the LED is 50% compared to its original

value. [Operating condition: Continuous operating at Ta = 25±2℃]

9. LVDS Receiver Clock SSCG (Spread spectrum clock generator) is defined as below figures

1111////FFFF

SS

SSSS

Fclk

Fclk____ss

FclkFclk

ss((((max

ssss

Fclk

FclkFclk

Fclk

Fclk____ss

FclkFclk

ss((((min

ssss

max))))

maxmax

min))))

minmin

10. Receiver Data Input Margin

Parameter Symbol

Min Type Max

Input Clock Frequency Fclk Fclk (min) -- Fclk (max) MHz

Input Data Position0 tRIP1 -|tRMG| 0 |tRMG| ns

Input Data Position1 tRIP0 T/7-|tRMG| T/7 T/7+|tRMG| ns

Input Data Position2 tRIP6 2T/7-|tRMG|

Input Data Position3 tRIP5 3T/7-|tRMG|

Input Data Position4 tRIP4 4T/7-|tRMG|

Input Data Position5 tRIP3 5T/7-|tRMG|

Input Data Position6 tRIP2 6T/7-|tRMG|

Rating

Unit

2T/7 2T/7+|tRMG| ns

3T/7 3T/7+|tRMG| ns

4T/7 4T/7+|tRMG| ns

5T/7 5T/7+|tRMG| ns

6T/7 6T/7+|tRMG| ns

tRIP2

tRIP3

tRIP4

tRIP5

Note

T=1/Fclk

tRIP6

tRIP0

tRIP1 LVDS-Rx Input Data

Rx1 Rx0 Rx6 Rx5 Rx4 Rx3 Rx2 Rx1 Rx0 Rx6Rx2Rx3

LVDS-Rx

VVVV

=

= 0000VVVV

= =

diff

Input Clock

diff diff

1/Fclk=T

3.2 Interface Connections



LCD connector: 187059-51221-1 (P-TWO, LVDS connector)

Symbol Description PIN

P460HVN03.0 Product Specification

Rev. 0.1

Symbol Description

1

2

3

4

5

6

7 LVDS_SEL

8

9

10

11

12

13

14

15

16

17

18

19 CH1_CLK- LVDS Channel 1, Clock - 44

20 CH1_CLK+ LVDS Channel 1, Clock + 45

21

22

23

24

25

N.C. AUO Internal Use Only 26

N.C.

N.C. AUO Internal Use Only 28

N.C.

ROTATE

N.C. No connection 33

N.C. No connection 34

N.C. No connection 35 CH2_CLK- LVDS Channel 2, Clock -

GND Ground 36 CH2_CLK+ LVDS Channel 2, Clock +

CH1_0- LVDS Channel 1, Signal 0- 37

CH1_0+ LVDS Channel 1, Signal 0+ 38

CH1_1- LVDS Channel 1, Signal 1- 39

CH1_1+ LVDS Channel 1, Signal 1+ 40

CH1_2- LVDS Channel 1, Signal 2- 41

CH1_2+ LVDS Channel 1, Signal 2+ 42

GND Ground 43

GND Ground 46

CH1_3- LVDS Channel 1, Signal 3- 47

CH1_3+ LVDS Channel 1, Signal 3+ 48

CH1_4- LVDS Channel 1, Signal 4- 49

CH1_4+ LVDS Channel 1, Signal 4+ 50

AUO Internal Use Only 27

AUO Internal Use Only 29

AUO Internal Use Only 30

Panel Rotation Display Control

High(3.3V) : Rotate Enable

Open/Low(GND) : Rotate Disable

Open/High(3.3V) for NS,

Low(GND) for JEIDA

51

31

32

N.C. AUO Internal Use Only

N.C.

CH2_0- LVDS Channel 2, Signal 0-

CH2_0+ LVDS Channel 2, Signal 0+

CH2_1- LVDS Channel 2, Signal 1-

CH2_1+ LVDS Channel 2, Signal 1+

CH2_2- LVDS Channel 2, Signal 2-

CH2_2+ LVDS Channel 2, Signal 2+

GND Ground

CH2_3- LVDS Channel 2, Signal 3-

CH2_3+ LVDS Channel 2, Signal 3+

CH2_4- LVDS Channel 2, Signal 4-

CH2_4+ LVDS Channel 2, Signal 4+

N.C. AUO Internal Use Only

N.C. No connection

GND Ground

N.C. No connection

V

DD

V

DD

V

DD

V

DD

AUO Internal Use Only

Power Supply, +12V DC Regulated

Note: N.C. : please leave this pin unoccupied. It can not be connected by any signal

(Low/GND/High).

Note 1: All GND (ground) pins should be connected together and should also be connected to the LCD’s

metal frame.

Note 2: All VDD (power input) pins should be connected together.

Note 3: All NC (no connection) pins should be open without voltage input.

AUO P460HVN03.0 Specification

Specifications and Main Features

Frequently Asked Questions

User Manual