AUO G156XW01 V1 Specification
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
() Preliminary Specification
( V ) Final Specification
AU OPTRONICS CORPORATION
G156XW01 V1
Module 1
Model Name G156XW01 V1
5.6” Color TFT-LCD
Customer Date
Approved by Date
Debblie Chiu
2011/7/19
Approved by
Note: This Specification is subject to
change without notice.
Prepared by
Wennie Lee
Desktop Display Business Group /
AU Optronics corporation
2011/7/19
document version 1.0 1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
G156XW01 V1
1.0 Handling Precautions............................................................. 4
2.0 General Description ............................................................... 5
2.1 Display Characteristics.................................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................................6
3.0 Functional Block Diagram .................................................... 10
4.0 Absolute Maximum Ratings ................................................. 11
4.1 TFT LCD Module............................................................................................................................ 11
4.2 Absolute Ratings of Environment ................................................................................................ 11
5.0 Electrical characteristics...................................................... 12
5.1 TFT LCD Module............................................................................................................................ 12
5.2 Backlight Unit.................................................................................................................................. 14
6.0 Signal Characteristic............................................................ 15
6.1 Pixel Format Image........................................................................................................................ 15
6.2 The input data format ....................................................................................................................15
6.3 Signal Description.......................................................................................................................... 16
6.4 Timing Characteristics ......................................................................................................... 18
6.5 Timing diagram.................................................................................................................... 19
6.6 Power ON/OFF Sequence .................................................................................................. 20
7.0 Connector & Pin Assignment ............................................... 21
7.1 TFT LCD Module............................................................................................................................ 21
7.2 Backlight Unit.................................................................................................................................. 22
8.0 Reliability Test..................................................................... 23
9.0 Shipping Label ..................................................................... 24
10.0 Mechanical Characteristics ................................................ 25
document version 1.0 2
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G156XW01 V1
Record of Revision
Version and Date Page Old description New Description Remark
0.0 2011/5/24 First Edition for Customer N/A
1.0 2011/7/19 5 All input signals are LVDS interface
and this module doesn’t contain an
inverter board for backlight.
5 Operating: 0 to +50 Operating: 0 to +60(+60
11 Operating Temperature max: +50 Operating Temperature max: +60
11 NA Note 4
14 Parameter guideline for LED Inverter
is under stable conditions at 25
23 THO: Ta= 50
o
C, 50%RH, 300hours THO: Ta= 60
o
All input signals are LVDS interface
and this module contains with an
driver for backlight.
surface temperature)
Parameter guideline for LED driver is
C
under stable conditions at 25 oC
o
C, 300hours
o
C as panel
LED
document version 1.0 3
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G156XW01 V1
1.0 Handling Precautions
Since front polarizer is easily damaged, pay attention not to scratch it.
1)
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, do not press the center of the LED reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
document version 1.0 4
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G156XW01 V1
2.0 General Description
This specification applies to the 15.6 inch-wide Color a-Si TFT-LCD Module G156XW01.The
display supports the HD - 1366(H) x 768(V) screen format and 16.7M colors (RGB 6-bits + Hi-FRC
data). All input signals are LVDS interface and this module contains with an LED driver for
backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 15.6”
Active Area [mm] 344.232 (H) x 193.536 (V)
Pixels H x V 1366(x3) x 768
Pixel Pitch [um] 252 (per one triad) ×252
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode, Normally White
2
White Luminance ( Center ) [cd/m2]
300 cd/m
(Typ.)
Contrast Ratio 500 (Typ.)
Optical Response Time [msec] 8ms (Typ., on/off)
Nominal Input Voltage VDD [Volt] +5.0 V
LCD Power Consumption [Watt]
LED Power Consumption [Watt]
2.15 W (Typ.), 2.5 W (Max.)
(all black pattern)
10.5 W (Typ.), 12 W (Max.)
(all black pattern)
Weight [g] 1250 (Typ.), 1350(Max.)
Physical Size [mm] 363.8(W) X 215.9(H) X 16.85 (D) Typ.
Electrical Interface One channel LVDS
Support Color 16.7M colors (RGB 6-bit + Hi-FRC )
Surface Treatment Anti-Glare, 3H
RoHS Compliance RoHS Compliance
Temperature Range
Operating
Storage (Non-Operating)
[oC]
[oC]
0 to +60(+60
-20 to +60
o
C as panel surface temperature)
document version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
5
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25
Item Unit Conditions Min. Typ. Max. Note
Viewing Angle [degree]
Contrast ratio Normal Direction
Response Time [msec]
Color / Chromaticity
Coordinates (CIE)
Color Coordinates (CIE) White
Horizontal (Right)
CR = 10 (Left)
Vertical (Up)
CR = 10 (Down)
Horizontal (Right)
CR = 5 (Left)
Vertical (Up)
CR = 5 (Down)
Raising Time (TrR)
Falling Time (TrF)
Raising + Falling
Red x
Red y
Green x
Green y
Blue x
Blue y
White x 0.263 0.313 0.363
White y 0.279 0.329 0.379
75
75
70
70
75
75
75
75
350
-
-
-
0.591 0.641 0.691
0.293 0.343 0.393
0.276 0.326 0.376
0.567 0.617 0.667
0.098 0.148 0.198
0.014 0.064 0.114
o
C:
G156XW01 V1
85
85
80
80
85
85
85
85
500 -
6 9
2 4
8 13
-
-
-
-
-
-
-
-
1,2
3
4
5
Central Luminance [cd/m2] 240 300 - 6
Luminance Uniformity
Crosstalk (in 60Hz)
Flicker
[%]
[%]
dB
75 80
-
1.5 8
-20
document version 1.0
6
7
9
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G156XW01 V1
Note 1: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt
temperature change during measuring (at surface 35
o
C). In order to stabilize the luminance, the
measurement should be executed after lighting Backlight for 30 minutes in a stable, windless and
dark room.
Photo detector
Measured distance
LCD Panel
TFT-LCD Module
ote 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
N
Viewing angle is the measurement of contrast ratio Њ10 and Њ5, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the screen
rotated about its center to develop the desired measurement viewing angle.
document version 1.0
7
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
G156XW01 V1
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, Tr
), and from “Full White” to “Full Black” (falling time, TfF),
R
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
Optical
Optical
response
response
100
100
90
10
10
0
0
%
%
Tr
Tr
F
F
White Black
1 Frame 1 Frame
Black
Tr
Tr
R
R
White
+ TfF = 8 msec (typ.).
Tr
R
ote 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
N
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3
9)-(1 points 9in LuminanceMinimum
Uniformity =
9)-(1 Points 9in LuminanceMaximum
document version 1.0
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory!
8
www.panelook.com
Loading...