Audix APS910 Specifications

Phantom Power

APS910

APS910

OVERVIEW

The APS910 is a professional phantom power adapter designed to convert 9-52 volts

of phantom power to 2.5 volt electret microphones with an internal impedance

converter and internal load. It’s supplied with a wide range of Audix electret

condenser microphones.

Features include immunity from RF, low noise circuitry, gold plated input and output

connectors, RoHS compliant. The APS910 is manufactured with a precision die cast

zinc alloy, durable black E-coat finish and gold plated XLR connectors.

INCLUDED PRODUCTS

The APS910 phantom power adapter is provided with the
following Audix microphones:

· ADX Series - ADX20iP, ADX40 & ADX60
· Instrument Microphones - MicroD, MicroHP and f90

Adapter

FEATURES

COMPATIBILITY

The APS910 phantom power adapter is also compatible with the

following Audix microphones:

· Instrument Microphone - ADX10FLP

· Headworn Microphones - ADX10, HT5, HT7BG3P and HG7B3P

· Gold plated XLR connectors

· Low noise circuitry, low distortion

· Operates on 9-52 V phantom

· Immune to RF

· Able to drive long balanced cable runs

· Designed, assembled & tested in the USA

· 1 year warranty

APPLICATIONS

· Product’s requiring a phantom power

adaptor with a mini 3 pin XLRm connector.

SPECIFICATIONS

Frequency Response

Output Resistance

Input Resistance

Power Requirements

DC Output Voltage

DC Current

Voltage Gain

Distortion

Connector

Length

Weight

DIMENSIONS (mm)

20Hz - 20 kHz

200

Ω

>50k

Ω

9-52 V phantom

2.5 BDC

2mA maximum

>-0.3 dB

<0.03% @ 1 kHz, 100mVrms
input <1% @ 1kHz, 1Vrms input

Gold plated XLR

64.6 mm / 2.5 in

170 g / 6 oz

ARCHITECT AND ENGINEER SPECIFICATIONS

The phantom power adapter shall be circular in shape in order to be discreetly

placed on a solid floor surface or on a stage. The phantom power adapter

shall operate at phantom power voltages between 9-52 volts and convert to

2.5 volts for electret microphones with an internal load. The phantom power

adaptor shall have a mini XLRm input connector on one end and a standard

XLRm connector on the opposite end. The connectors shall be gold plated.

The circuit board will consist of ROHS surface mount components and utilize

lead free solder paste. The distortion level shall be less than .03% at 1 kHz with

100mV rms input voltage and less than 1% at 1kHz with 1V rms input voltage.

The weight shall be 6 oz with dimensions of 2.5 inches x .79 inches in diameter.

OPERATION AND MAINTENANCE

The APS910 is very simple to use. Before plugging cables into the APS910, be

sure that the mixing console is either off or muted. The cable from the micro-

phone will terminate in a mini XLR female connector. Plug this connector into

the small end of the APS910 which has a 3 pin mini-XLR male connector. The

pins must match for a successful connection; there is a keylock for the correct

location. The other end of the APS910 is a standard XLR male. This mates with a

standard microphone cable. The XLR female side of the microphone cable will

plug into the APS910. Similarly, there is a keylock to guide the connection. To

disconnect either side push down on the spring release on the connector with

your thumb and the cable can be disengaged.

APS910

FREQUENCY RESPONSE

PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml.
SERVICE AND WARRANTY:

workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes
any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No
Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if any,
for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of
any kind. Should your microphone fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN
THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL
NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX’S
SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

This microphone is under warranty for a period of 3 years to be free of defects in material and workmanship. In the event of a product failure due to materials or

www.audixusa.com

Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070

503.682.6933 Fax: [phone]

ver 4 06-17