Audix DCLIP Specifications

THE ULTIMATE

DCLIP

DCLIP

OVERVIEW

The DCLIP is a heavy duty, simple to use mic clamp system that attaches
to a mic stand or any number of popular stands with either a 3/8” or 5/8”
threaded surface. Such products include boom stands, tri-pods, Audix DVICE,
Audix DCLAMP, and other drum mic clips. The DCLIP is provided with a
thread adapter that allows it to be used with European 3/8” mic stands.

Optimized to be used with the Audix D Series instrument mics, the DCLIP will
work with any mic barrel with an OD (outer diameter) measurement of
19 mm - 23 mm.

TO OPERATE

The best method to place the mic into the clip is to snap the mic down into place

from the top side of clip (see photo bottom right).

Do not try to slide the mic into the end of the clip as the clip is intended to

expand only from the top. This snap-to-fit design provides a very tight grip on the

barrel microphone holding it firmly in any position.

INSTRUMENT MIC HOLDER

The metal thumbscrew allows the clip to rotate the position of the mic 180°. The

thumbscrew locks firmly into place without having to over-tighten. To loosen

the thumbscrew, simply turn counter-clockwise. It is not necessary to loosen the

thumbscrew more than 1/4 turn. Note that the screw and bolt will come apart if

loosened more than 2 complete turns.

Optimized for use with the
Audix D series instrument
mics. (Pictured with Audix D2
mic).

Can be used with shotgon
mics (Pictured with the Audix
UEM81S).

Can be used with overhead
pencil condenser mics (Audix
ADX51 pictured).

FEATURES

• Heavy duty nylon material

• Metal thumbscrew locks holder firmly into position

• Works with a wide variety of popular microphones

• Durable brass threads

• 1 year warranty

To operate; Place mic barrel over top of mic
and snap the mic into place. Depending on
the size of the mic barrel, it may take quite
a bit of pressure before the mic snaps into
place. Do not worry, the clip has quite a bit
of play and will not break.

DCLIP

PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml.
SERVICE AND WARRANTY:

workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes
any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No
Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if
any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages
of any kind. Should your product fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN
THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL
NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUC TS, AUDIX’S
SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILIT Y OF SUCH DAMAGES.

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

This product is under warranty for a period of 1 year to be free of defects in material and workmanship. In the event of a product failure due to materials or

www.audixusa.com

Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070

503.682.6933 Fax: [phone]

ver 2.0 05-16