Page 1
APBX 8 R REFLEX SUB BOX
1 Ultra-low prole (5.16 in. / 131 mm) box with slot-ported design
perfectly tuned to fully exploit the APS 8 R driver.
2 2S² (2 Sides/2 Sounds) design provides the ability to
choose between Down-Firing mounting to increase the low-
frequency extension and Up-Firing install to obtain
more punch and denition.
3 Levelling feet with velcro inserts included for a secure grip with
the carpet while maintaining easy removal.
4 SSP (Sub Smart Plug) features both traditional push contacts and
a Plug-&-Play terminal block to easily congure the impedance as
required and provides a quick release.
5 Rounded corners allow easy positioning in the trunk and act as
reinforcement to reduce enclosure resonance.
6 Special designed cone-dustcap-basket geometry which
guarantees a long linear excursion capability (9 mm, one-way).
7 Massive driver motor assembly, optimized with FEM (Finite
Element Modeling) for perfect control under high excursion
conditions.
8 Water-repellent treated paper 8 in. cone, featuring a prole
developed with FEM and optimized with the Klippel Scan
Vibrometer.
9 Specically developed to be combined with either the AP8.9 bit
(2 CH bridged) or AP4.9 bit /AP4 D (2 CH bridged) ampliers
taking advantage of the bass boost feature and integrated
parametric equalizer of the built-in DSP.
10 Sturdy metal grid included for a total protection of the subwoofer
driver.
www.audison.eu
TECHNICAL SPECIFICATIONS
Component REFLEX SUB BOX
Subwoofer size mm (in.) 200 (8)
Subwoofer Voice coil Ø mm (in.) 40 (1.57)
Power handling W peak 500
W continuous 250
Impedance Ω 4
Sub box size mm (in.) 473 (18.62) x 334 (13.15) x
109 (4.29)
Weight of one component kg (lb) 6,64 (14.64)
Magnet High density flux ferrite
Cone Water-repellent treated paper
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
A
A B C C
473 334 109 131 mm
18.62 13.15 4.29 5.16 in.
1
B
C
C
1
All specications subject to change without notice_16.F
59
Loading...