APBX 8 AS ACTIVE SUB BOX
1 Integrated 250 W RMS @ 0.4 Ω D-Class amplier featuring he-li
technology (high efciency / low impedance) without switching
power supply, for a performance next to ideal.
2 Dual coil dedicated speakers with extremely low impedance, to
fully exploit the amplier power
3 Butterworth low-pass lter at 12dB/Oct. with variable cutting
frequency (50-200 Hz), phase control (0 - 180 °) and adjustable
bass-boost 0÷6 db @ 45Hz.
4 Defeatable lter to use the sub dedicated output of a bit or AP bit
processor.
5 High level audio input on multi-pin connector for maximum OEM
integration and low level on RCA for aftermarket sources.
6 ART turn on function (Automatic Remote Turn-On) selectable
among: Remote-in, Hi-level, Audio signal.
7 Box with ultra-low prole (6.22 in. / 158 mm) in air suspension,
designed to take full advantage of the performance of the 8-inch
APS 8 DL high-impedance driver.
8 The SSP (Sub Smart Plug) terminal block is provided with a Plug & Play
connector to be able to disconnect the box easily and safely.
9 The 2S² (2 Sides / 2 Sounds) design provides the ability to select
between Down-Firing positioning to increase the low frequency
extension and Up-Firing install to obtain more punch and denition.
10 Down-ring levelling feet with Velcro inserts included for a secure
grip with the carpet, ensuring extreme ease of removal.
11 Rounded corners allow easy placement in the trunk and act as a
reinforcement to reduce enclosure resonances.
12 Exclusive design of the cone, dust-cap and basket geometry to
achieve a wide linear excursion (9 mm in one direction), keeping
the depth required for assembly to a minimum.
13 HRC AP remote control included.
14 Sturdy metal grille included, for a total protection of the subwoofer
driver.
High Efciency -
Low Impedance
Sub Smart Plug
www.audison.eu
PLUG-&-PLAY
2 Side 2 Sound
TECHNICAL SPECIFICATIONS
Component ACTIVE SUB BOX
Subwoofer size mm (in.) 200 (8)
Subwoofer Voice coil Ø mm (in.) 40 (1.57)
Output power (RMS) W peak 500
W continuous 250
Impedance Ω 0,4
Sub box size mm (in.)
Weight of one speaker kg (lb) 6,3 (13.89)
Magnet High density flux ferrite
Cone Water-repellent pressed paper
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
386 (15.2) x 158 (6.22) x 298 (11.73)
HRC AP
B
A
A B C C
386 158 135 158 mm
15.2 6.22 5.31 6.22 in.
1
C
C
1
All specications subject to change without notice_17.A