Audison Prima APBX 10 AS User Manual

APBX 10 AS ACTIVE SUB BOX

1 Integrated 400 W RMS @ 0.16 Ω D-Class amplier featuring

he-li technology (high efciency / low impedance) without

switching power supply, for a performance next to ideal.
2 Dual coil dedicated speakers with extremely low impedance, to

fully exploit the amplier power

3 Butterworth low-pass lter at 12dB/Oct. with variable cutting

frequency (50-200 Hz), phase control (0 - 180 °) and adjustable

bass-boost 0÷6 db @ 45Hz.

4 Defeatable lter to use the sub dedicated output of a bit or AP bit

processor.
5 High level audio input on multi-pin connector for maximum OEM
integration and low level on RCA for aftermarket sources.
6 ART turn on function (Automatic Remote Turn-On) selectable
among: Remote-in, Hi-level, Audio signal.

7 Box with ultra-low prole (6.22 in. / 158 mm) in air suspension,

designed to take full advantage of the performance of the 10-inch
APS 10 DL high-impedance driver.
8 The SSP (Sub Smart Plug) terminal block is provided with a Plug&Play

connector to be able to disconnect the box easily and safely.
9 The 2S² (2 Sides / 2 Sounds) design provides the ability to select

between Down-Firing positioning to increase the low frequency

extension and Up-Firing install to obtain more punch and denition.
10 Down-ring levelling feet with Velcro inserts included for a secure

grip with the carpet, ensuring extreme ease of removal.
11 Rounded corners allow easy placement in the trunk and act as a
reinforcement to reduce enclosure resonances.
12 Exclusive design of the cone, dust-cap and basket geometry to

achieve a wide linear excursion (9 mm in one direction), keeping

the depth required for assembly to a minimum.

13 HRC AP remote control included.
14 Sturdy metal grille included, for a total protection of the subwoofer

driver.

High Efciency -

Low Impedance

Sub Smart Plug

www.audison.eu

PLUG-&-PLAY

2 Side 2 Sound

TECHNICAL SPECIFICATIONS

Component ACTIVE SUB BOX
Subwoofer size mm (in.) 250 (10)

Subwoofer Voice coil Ø mm (in.) 60 (2.36)
Output power (RMS) W peak 800

W continuous 400

Impedance Ω 0,16
Sub box size mm (in.)
Weight of one speaker kg (lb) 9,4 (29.72)
Magnet High density flux ferrite
Cone Water-repellent pressed paper

Elettromedia - 62018 Potenza Picena (MC) Italy - T [phone] - F [phone] - www.elettromedia.it

460 (18.11) x 158 (6.22) x 338 (13.31)

HRC AP

B

A

A B C C

460 338 135 158 mm

18.11 13.31 5.31 6.22 in.

1

C

C

1

All specications subject to change without notice_17.A