AT&T CL81114, CL81214 Quick Start Manual
Press to show caller ID
log when the handset is not
in use.
Press to scroll down while
in menus.
Press to decrease the
listening volume when on
a call.
•
•
•
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342).
Telephone base installation
If you have DSL
high-speed Internet
service, a DSL filter
(not included) is
required.
This quick start guide provides you with basic instructions only.
For more complete instructions, refer to your Abridged user’s
manual provided in the package, or see the online Complete
user’s manual at www.telephones.att.com/manuals.
Plug the power adapter
into an electrical outlet
not controlled by
a wall switch.
Charger installation
Battery installation
Install the battery, as shown below. Charge your handset(s) before initial use.
The battery is fully charged after 10 hours of continuous charging.
Quick start guide
CL81114/CL81214
Plug the telephone
base power adapter
into an electrical
outlet not controlled
by a wall switch..
Plug the other end
of the telephone
line cord into a
telephone jack or
a DSL filter.
Raise the
antenna.
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit
our website at www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.
Quick reference guide
Handset
side view
Initial settings
We recommend you program your telephone system before use.
The followi ng are a few examples of comm on features to set before using
the telephon e. Refer to the Han dset settings in the Abridged user’s man ual
or the online Comp lete user’s manual fo r detailed instructions on setti ng all
telephone fe atures.
Set date/time
Set the date/time before using the telephone.
1. -> or -> Set date/time -> .
2. Enter the month, day and year using the dialing keys -> .
3. Enter the hour and minute using the dialing keys.
4. or to choose AM or PM -> .
Handset ringer volume
You can set the rin ger volume level to one of the six levels or turn the
ringer off.
1. -> or -> Ringers -> .
2. to select Ringer volume.
3. or to choose the desired level -> .
Reset language to English
If you want to change the display language, or you have accidentally
changed the language and want to switch it back to English, follow the steps
mentioned below.
-> On the handset, enter 364# using the dialing keys.
•
Handset
Telephone
base
indicator
On when the handset is in use.
On when a handset is being registered.
Flashes when there is an incoming
call or when handsets are being
deregistered.
Flashes when another telephone is in
use on the same line.
•
•
•
•
While the telephone is idle, press
to page all handsets.
Press and hold to begin handset
deregistration.
•
•
Telephone operation
Operation Steps
Making a call
Press or -> Enter the telephone
number.
On-hook dialing
(predialing)
Enter the telephone number -> Press
or
to call.
Answering a call
Press or , or press any dialing key
(0-9, or #).
Ending a call
Press or return the handset to the telephone base or
charger.
Speakerphone
During a call, press to switch between
handsfree speakerphone and normal handset use.
Redial
Press repeatedly to select the desired entry
-> or to call.
Volume control
Press to decrease or press to increase
the listening volume during a call.
Call waiting
(Requires subscription
from telephone
service provider)
Press
to put current call on hold and to take the
new call; press again to switch back and forth between
calls.
Plug the power
cord and telephone
line cord into the
jacks.
T
MH
)
42
3
T
Battery Pa
BT162342/B
WA
RNING /
AV
DO NOT BURN
O
NE P
AS INCINÉRER
Made in China / Fabr
i
THIS
SIDE UP /
CE
CÔ
TÉ
VERS
L
E HA
UT
Ba
ttery Pa
ck / Bloc
-
piles
:
BT18
3
3
4
2/BT
2
8
3
342 (2
.4V 400m
Ah Ni-MH)
W
ARNING /
AV
ERTISSEMENT
:
DO NOT BURN OR PUNCTURE BA
TTERIES.
NE
PA
S INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué
e
n
c
hine CR1
349
Step 1
Plug the battery connector securely into the socket inside the handset battery
compartment. Insert the supplied battery with the label THIS SIDE UP facing up,
as indicated.
Step 2
Align the cover flat against the battery compartment, then slide it upwards until
it clicks into place.
Step 3
Charge the handset by placing it face forward in the
telephone base or charger. The CHARGE light on the
handset is on during charging.
light
On when the handset is
charging in the telephone base
or charger.
Press repeatedly to view the
last ten numbers dialed.
While entering numbers,
press and hold to insert a
dialing pause.
•
•
Press to make or answer
a call.
Press and hold to set or dial
your voicemail number.
Press to switch to tone
dialing temporarily
during a call if you have
pulse service.
While entering names, press
to change the next letter to
upper or lower case.
•
•
Press to make or answer a call
using the speakerphone.
Press to show
directory entries when the
handset is not in use.
Press to scroll up while
in menus.
Press to increase the
listening volume when on
a call.
•
•
•
When the handset is not
in use, press to show
the menu.
While in the menu, press to
select an item or save an
entry or setting.
•
•
During a call, press to
hang up.
While in a menu, press to
cancel an operation, back
up to the previous menu,
or exit the menu display; or
press and hold this button
to exit to idle mode.
•
•
(pound key)
Press and hold to enter the
QUIET mode setting screen, or
to deactivate QUIET mode.
During a call, press to mute
the microphone.
Press to delete digit
or character.
•
•
During an outside call or
intercom call, press to change
the audio quality to best suit
your hearing.
Press to initiate a one-to-one or
one-to-group broadcast.
Press and hold to broadcast to a group of
system handsets.
•
•
light
For more detailed instructions, please refer to the Abridged user’s manual
provided in your package, or for a full set of installation and operation
instructions, refer to the online CL81114/CL81214 DECT 6.0 cordless
telephone with caller ID/call waiting Complete user’s manual at
www.telephones.att.com/manuals.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial
1 (866) 288-4268.
© 2014 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 1.0 AT&T 12/14.
Caller ID
This product supports caller ID services offered by most telephone service providers.
The telephone s tores caller ID i nformation for th e last 50 incom ing calls. Thi s
information is common to all ha ndsets.
Missed call indicator
When a handset is in idle mode and has new or missed calls, its screen shows
XX Missed calls.
You can erase the missed call indicator either by reviewing the call log one by
one, or by pressing and holding on the handset in idle mode.
Review and dial a number in the call log
1. in idle mode -> or to scroll through the list.
2. or to call when the desired entry is displayed.
Call block
If you have subscribed to caller ID service, you can use the call block feature to
reject certain calls automatically. The call block list can store up to 20 entries.
This feature is only available on the cordless handset.
Operation Steps
Adding a call
block entry
1. -> or -> Call block -> .
2. to select Block list.
3. or -> Add new entry -> .
4. Enter a telephone number up to 30 digits -> .
5. Enter a name up to 15 characters -> .
Blocking calls
without number
1. -> or -> Call block -> .
2. or -> Calls w/o num -> .
3. or to choose Not block or Block -> .
Directory
The directory can store up to 50 entries, which are shared by all system handsets.
Operation Steps
Adding an entry
1. .
2. or -> Directory -> .
3. or -> Add contact -> .
4. Enter a telephone number up to 30 digits -> .
5. Enter a name up to 15 characters -> .
Searching/dialing
an entry
1. in idle mode.
2. Press or to browse through the directory, or
press the dialing keys (0-9) to start a name search.
3. Press or to call.
Loading...