Atlas IED 194-812, 195-812, 195-89, SM194-89 Installation Guide
Series 830, 840, 194, & 195
Installation Of The 830 Series Into The 194 Series Enclosure
Installation of Speaker (order separately), Clock (manufactured by others), and 830 Series Baffle into Model 194 enclosure.
1/2
Installation Of The 840 Series Into The 195 Series Enclosure
Installation of Speaker (order separately), Clock (manufactured by others), and 840 Series Baffle into Model 195 enclosure.
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004382 RevA 5/12
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
Series 830, 840, 194, & 195
The universal clock hanger bracket (patent pending) allows mounting of virtually any new as well as most older clocks to Atlas Sound clock/speaker
baffles. The factory-installed hanger bracket allows flexible orientation of clock/speaker baffles at time of installation and comes complete with
hardware bag equipped with nuts, bolts, and stud bolts.
1. Identify the clock bracket style used by the clock manufacturer (typical examples are shown below).
2. Determine portion(s) of the Universal Bracket required to mount the clock.
Note: Bracket can be unscrewed and re-oriented to meet individual needs.
3. Determine the proper orientation of the baffle (vertical or horizontal).
Verify mounting holes on the mounting bracket before trimming, if trimming is required.
4. Attach the clock to the clock/speaker baffle.
Clock Bracket Style Application Mounting Holes/Slots
(supplied by clock manufacturer) 830 and 840 Series Clock/Speaker Baffles (for most applications)
Stud Type Bracket
(bracket mounts through an attached bolt stud)
This configuration is typical of clocks by:
Cincinnati
Edwards
Faraday
Franklin
Standard
Breakaway straps
available for
special applications if
needed
2/2
Spade Type Bracket
(bracket simply hooks into a slot on the hanger bracket)
This configuration is typical of clocks by:
American Time & Signal
Dukane
Lathem
Rauland
Simplex
Plate Style Bracket
(bracket supplied by clock maker bolts
directly to universal hanger bracket)
This is typical of clocks by National
Strap Hanger
Application
(break away the hangers
from the side and bolt for
clock hanger)
This solution works on
obscure older models or
unique brands.
Baffle
Mounting Holes
Use the correct holes
to mount bracket/clock
to baffle.
Verify mounting holes
before any trimming!
Use trimming chart below
for cutting if needed
Trimming
Locations
Use these cutting
locations only if
needed so that clock
hanger mounts
correctly to baffle.
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004382 RevA 5/12
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
Loading...