Atlas IED SD72W-KIT Installation Guide

SD72, SD72W, SD72WV

1. Use two wire nuts to attach the appropriate transformer wires to the field wiring.

2. Cut off the bare portion of the un-used leads and terminate with wire nuts.

Hardware Reference:

Model SD72 Mounts to all Atlas Sound 8" baffles except FA series

Models SD72W & SD72WV are compatible with the following Atlas Sound hardware items:

Mounting Rings: 76-8(E2), P77-8, P78-8

T-Bridges: 81-8R, 81-8S

Enclosures: (EZ)95-8 Series, T95-8 Series, Q408, CS95-8, BMT95-8, BMT95-8-7

1/1

TAP WATTAGE

0.25 Red

0.5 White

1 Yellow

2 Blue

5 Brown

COMMON BLACK

70.7V

Frequency Response: 55Hz-8kHz

Sensitivity: 97dB

TAP WATTAGE 25V

0.25 Blue

0.5 Gray

1

2 Violet

5 Orange

COMMON BLACK

White/wGreen

(1W/1M)

©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004381 RevA 5/12

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasSound.com