Atlas IED P900 User Manual

Specifications subject to change without notice

© 2001 Atlas Sound LP Printed in U.S.A. 000501 Sl3-1077

215

THREE

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]

MODEL LOUDSPEAKER MOUNTS

NO. SIZE DIMENSIONS ENCLOSURE MOUNTING RING / T-BRIDGE

P900 8" 12

3

⁄4" Dia. x 3⁄8" Proj. (EZ)95-8 Series, EZ96-8, 75-8(E2),

(203mm) (324mm x 10mm) T95-8 Series, 76-8(E2),

199-8, Q408, P77-8, P78-8,
CS95-8(NS) 81-8R(S)
96-8 Series

▲

EQ81 Tile Bridge

▲

P910 8" 101⁄2" SQ. x 3⁄8" Proj. 193-8, 193-8-5 73-8(E1)(E2),

(203mm) (267mm x 10mm) 81-8S

P900

(OR)

FEATURES

• Louvered Design Provides Superior Dispersion

• Molded from Attractive and Durable Polystyrene Plastic

• Accommodates a Wide Variety of Atlas Sound Mounting Rings or Enclosures

GENERAL DESCRIPTION

P900 / P910. These beautiful, high-impact, polystyrene plastic recessed grille

have an attractive ceiling-white finish in round or square styling respectively.
The acoustical louver design provides maximum sound transmission and disper­sion. The 8" (203mm) dia. loudspeaker cone is not visible through the louvers
and the loudspeaker mounting screws are hidden for a clean appearance. The
high-impact polystyrene plastic will not crack or chip and the baffle contains no
components which promote mildew growth. Baffle may be easily repainted on
the job site to match any decor. Units install via screw-mount installation.

ARCHITECT AND ENGINEER SPECIFICATIONS

Plastic baffle shall be Atlas Sound Model _____ (P900, P910). Unit shall be
molded from a high-impact polystyrene plastic and shall not contain components
which promote mildew growth. The sound emission area shall be louvered for
maximum sound transmission and dispersion. Baffle shall have concealed self­tapping screws for mounting Atlas Sound standard 8" (203mm) dia. loudspeaker
Model ______. Baffle shall mount Atlas Sound enclosure Model _____ or
mounting ring Model _____.

POLYSTYRENE RECESSED

CEILING BAFFLES FOR 8" LOUDSPEAKERS

P900
P910

P910

▲

EQ81 tile bridge works only with 96-8 Series enclosures.