Page 1
M600-DT
Paging/Conference Microphone
Features
• 16" Small Diameter Flexible Gooseneck
• Cast-Alloy Base with Rubber Isolation
• Wide Range Phantom Power 12V-52V DC Operation
• Active / On Blue Illumination Ring On Base
• Easy Access Click Free, Latching Press to Talk Switch
• Excellent Speech Intelligibility with Low Ambient Noise
• High Gain with Effective Feedback Control
Applications
• Classrooms
• Conference Rooms
• Lecture Halls
• Commercial Paging and Announcements
General Description
The AtlasIED M600-DT is a high quality cardioid condenser gooseneck
microphone for any podium or PA paging / announcement applications.
The M600-DT features a casted alloy base with rubber isolation, a slim
flexible 16" neck, and a latching press to talk switch with Active / On blue
illumination indicator.
The M600-DT features high gain before feedback design that works well
in most environments. The high sensitivity and wide frequency pickup
allows for exceptional clear sound quality. The M600-DT reinforces the
natural sound of the voice and requires little to no EQ.
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005944 RevA 3/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com
Page 2
Microphone
Microphone Type Condenser
Polar Pattern Cardioid
Frequency Response 80Hz - 18000Hz
Impedance 250 Ω
Maximum Input Sound Level 133dB SPL, 1 kHz @ 1% T.H.D.
Dynamic Range (Typical) 109dB, 1 kHz @ Max SPL
Sensitivity -35dB (1 V /Pa)
Switch On / Mute: Push Latching, On has Blue Illumination Ring
Phantom Power 12V-52V DC, Current Draw 5mA Typical
Output Connector 3-pin XLR - Male Diameter 2.0"
S/N Ratio >68dB, 1kHz @ 1 Pa
Mechanical
Base Material Alloy Casting with Rubber Isolation
Color Black
Product Dimensions - Base (HxWxD) 1.87" x 4.92" x 5.91" (48mm x 125mm x 150mm)
Capsule Pop Cover 10mm Opening
Microphone Length 16.5" (420mm) (None Removable)
Shipping Dimensions (HxWxD) 6.3" x 5.5" x 24.4" (160mm x 140mm x 620mm)
Net Weight - lbs 2.3lb (1.04kg)
Shipping Weight - lbs 3.3lb (1.5kg)
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005944 RevA 3/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com
Page 3
Polar Pattern
90˚
0˚ 180˚
270˚
Frequency Response
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005944 RevA 3/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com
Page 4
Dimensional Drawings
16.54"
(420mm)
5.91"
(150mm)
1.87"
(48mm)
4.92"
(125mm)
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005944 RevA 3/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com
Page 5
Architect and Engineer Specications
The AtlasIED M600-DT microphone shall be a cardioid condenser goose
neck microphone ideal for any podium or PA paging / announcement
applications. The M600-DT shall have a cast-alloy base with rubber
isolation, a slim flexible 16.5" neck, and a latching press to talk switch
with Active / On blue illumination indicator.
It shall have a cardioid polar pattern with a frequency response of 80 Hz
to 18,000 Hz with a sensitivity of 35dB (1V / Pa) and S/N Ratio >68dB,
1kHz @ 1Pa . Output shall be low impedance balanced (600 ohms).
The Phantom voltage operating range shall be 12V-52V DC with the
impedance of 250 ohm. The microphone connection shall be a 3-pin
XLRM-type connector.
The microphone shall be 16.5" (420mm) long and have a head diameter
of 0.4" (10.0mm). Weight shall be 2.3lb (1.04kg). The microphone shall
include a wind cover.
The AtlasIED M600-DT shall be as specified.
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005944 RevA 3/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com
Loading...