Atlas IED M-1AJW Data Sheet
Infrared Repeater System
M-1A Series, F-1, M-1CB4B
General Description
M-1A Series. Atlas Sound IR repeaters allow the operation of virtually
any IR-controlled A/V component from multiple room locations. The
M-1A Series repeater will receive the IR signal and rebroadcast it to the
small F-1 flasher LED positioned on the front of each A/V component.
The F-1 forwards the signal to the source component’s IR receiver.
These micro repeaters feature an attractive, flush, white lens that blends
with any white surface. Their high sensitivity enables use within a 40'
range with fast reaction time and minimal interference. Repeaters are
available installed on a white decorator-style subplate (cover plate not
included) or separately for flush-mounting in a ceiling, wall, cabinet, or
speaker grille. Model M-1A conceals behind the grille of Architectural
Series in-wall speakers to provide custom IR control. (Note: Unit may be
sensitive to florescent light and sunlight.)
F-1 Series. Small F-1 flasher LEDs are shipped with an adhesive backing
1
⁄8" mini plugs for connection to all IR-controlled A/V components. Up
and
to four flasher units may be connected to a single M-1A repeater using
two M-1CB4B connector blocks or any standard adapter (by others).
(Note: some high-end A/V components are equipped to accept hardwired IR signals. In this case, F-1 flashers would not be necessary.)
Specifications
M-1A
Features
• Easily Installed
• Etends IR Control Especially for Rack Mounted Equipment
• Work with Any IR Controlled Device
Applications
Enjoy the convenience of remote control anywhere...any time! Atlas sound
offers three repeater styles that let you create remote controls that meet
your lifestyle. Wall mounted decora-style Model M-1AJW features a green
LED for visual feedback of system status. Concealed mounting Model M-1A
features a lens-only configuration for hidden IR control from the ceiling, wall,
or anywhere with a mounting depth of 21⁄2".
M-1A
Description IR Repeater
Current Draw 12mA
Stlye Flush Mount
Color White Lens
M-1AJW
Description IR Repeater
Current Draw 12mA
Stlye Wall Mount, Supplied on Decorator Subplate*
Color White Lens, White Supplater
F-1
Description Flasher
Current Draw .05mA
Stlye Surface Mount
Color Black Lens,Black Cord
* Decor style devices require cover plate (This is a standard item typically ordered
in bulk with other electrical supplies).
**Order Model M-1A separately
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004122 RevA 7/11
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
1/2
Stand-Alone IR Repeater System
M-1CB4B. For installation flexibility, the M-1CB4B amplified connector
block is offered as a plug-in interface device that provides connections
for an M-1A Series repeater, four F-1 flashers, and power supply
PS-M12. This configuration allows IR operation of up to four A/V
components from up to four room locations. The M-1CB4B offers 1⁄8’
mini jacks for power supply Model PS-M12 and up to four F-1 flashers;
it also provides terminals for wiring up to four M-1A repeaters (rooms) in
parallel fashion. The units amplified circuit design supplies clear, strong
IR data to source components.
This stand-alone IR repeater system requires: one M-1A repeater in each
remote room location, one M-1CB4B for every four A/V components,
a PS-M12 power supply, and one F-1 flasher for each A/V component.
For installations which require control of more than four components or
transmission from more than four rooms, multiple M-1CB4B blocks may
be used.
M-1CB4B
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004122 RevA 7/11
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
2/2
Loading...