Atlas IED IP-ZCM1RMK Data Sheet

IP-ZCM

PoE+ IP to Analog Gateway (Zone Controller)

IP-ZCM Front

IP-ZCM1RMK

Model Includes (1) IP-ZCM and PA702-RMK Rack Mount Kit Model Includes (2) IP-ZCM and PA702-RMK Rack Mount Kit

Features

Network Features

• Dynamic or Static IP Address

• IEEE 802.3 10/100Base-T Ethernet

• IEEE 802.1q Tagging

• IEEE 802.3af and 802.3at Compliant

Audio Codec Support

• G.711 u-law / a-law (16 kbit/s)

• G.729 Wideband Audio (64 kbit/s)

Auto Provisioning

• DHCP Option 66, 150, or TFTP Server

• DHCP Option 72 for HTTP Server

Auto Registration

• SLP for InformaCast

• DHCP Option 72 for Syn-Apps' Revolution or GCK

Static Configuration

• HTTP GUI for Static Configuration

• Cisco SRST

Audio Features

• Integrated 15-Watt Amplifier (802.3af) 8Ω

• Selectable 8Ω or 70.7V Speaker Output

• Audio Line-In Balanced (1V 10kΩ)

• Audio Line-Out Balanced (1V 10kΩ)

• Mic Input Unbalanced (<2.2kΩ)

Additional Features

• 2 General Purpose Inputs

• 1 General Purpose Relay Output (2A @ 30 VDC)

• External Power Supply Option

General Description

AtlasIED IP-to-analog gateways are perfect for connecting your unified
communication platform to off network analog third party systems,
including, but not limited to, sending notifications to analog overhead
paging, trigger or be triggered by access-control systems, assist to fire
alarm, and two-way audio support for video-surveillance, simply plug and
play.

Applications

AtlasIED IP-ZCM registers as a communication endpoint directly within
InformaCast, GCK, and Syn-Apps' Revolution advanced notification
applications, supporting audio broadcast to enhance physical security
while improving day-to-day communications through advanced alerting,
bell schedules, pre-recorded, & scheduled announcements, while
leveraging the WAN or LAN network architecture.

The IP-ZCM bridges the network to analog world utilizing CAT5e cable
to transmit audio broadcasts from the advanced notification applications
to analog loudspeakers or amplifiers. The integrated amplifier can deliver
up to 25-watts of total power to loudspeakers at either 70.7V or 8Ω. The
line output can be used to connect a commercial power amplifier that
can power larger numbers of loudspeakers allowing the system to cover
large areas like quads, athletic fields, parking lots, or other common
areas that are too large to be handled by a standard IP loudspeakers.

When used within a Cisco environment, this IP-to-Analog gateway from
AtlasIED can join Cisco’s Unified Survivable Remote Site Telephony
(SRST) as a supported device within SRST endpoint Architecture. Cisco’s
SRST provides remote location call-processing redundancy when access
to the centralized Cisco Unified Communications Manager is interrupted
because of a WAN outage. The ability of LAN communication between
any combination of phones and speakers is particularly critical during an
emergency (which may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the IP-ZCM
IP-to-Analog gateways can register as SIP devices directly to a SIP
server or VoIP Communications Manager for critical alerts /public
address applications.

IP-ZCM Back

IP-ZCM2RMK

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005844 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

System

Type PoE+ IP to Analog Gateway (Zone Controller)

Operation Mode Self Powered

Indicators Network Activity

General Purpose Interface Two Trigger Inputs / One Relay Output (2A @ 30 VDC)

Amplication

Type Single-Channel Class D Topology

AC Power Input PoE or PoE+ and External 24VDC

Power Rating (RMS) 12 Watts Max (802.3AF) / 25 Watts Max (802.3AT)

THD <.2%

Cooling Passive / Convection

Microphone (Optional)

Sensitivity Minus 35 (±4dB) / (0db = 1V/pa, 1kHz)

Impedance Less than 2.2kΩ

Directivity Omnidirectional

Frequency Range 20Hz – 20kHz

Standard Operation Voltage 2V

Max. Operation Voltage 10V

Current Consumption Max. 0.5 mA

Sensitivity Reduction Within Minus 3dB @ 1.5V

S/N Ratio More than 62dB

Audio Inputs and Outputs

Input: Analog Audio Type(s) One Balanced Analog

Input: Analog Connectivity Secured Screw Terminal Block

Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable

Input: Network Connectivity RJ-45 Female

Output: Analog Audio Type(s) Two Balanced Line Level, 1 Transformer Isolated

Output: Analog Connectivity Secured Screw Terminal Block

Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast)

Output: Digital Connectivity N/A

Output: Loudspeaker Level 8Ω, 12W (802.3AF), 25W (802.3AT)

Output: Loudspeaker Connectivity Secured Screw Terminal Block

Software

SA-Announce Compatible Versions 9.0.18+

InformaCast Compatible Version 8.0+

GCK Compatible Version 3.0+

Network

Ethernet IEEE 802.3 10/100Base-T

PoE IEEE 802.3 AF/AT Compliant

VLAN IEEE 802.1q Tagging

Protocols

IP Addressing DHCP / Static

Auto-Provisioning HTTP / TFTP

Auto-Registration HTTP / Service Location Protocol / IEDNet

Time NTP

Telephony SIP

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005844 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

Enclosure

Color Black

Grille Material N/A

Baffle Material N/A

Mounting / Rigging Provisions Wall Mount Via Key Hole Slots / Rack Mount 1RU Half Width

Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC

Ingress Protection IP-30

Logo Silver and Black

Product Dimensions (HxWxD) 1.72" x 8.5" x 8.85" (44mm x 216mm x 225mm)

Shipping Dimensions (HxWxD) 4.8" x 11.75" x 10.31" (122mm x 299mm x 262mm)

Net Weight - lbs 4.1lb (1.86kg)

Shipping Weight - lbs 4.76lb (2.16kg)

Warranty Coverage

Warranty Period 1 Year

NOTES:

1. Sensitivity: Half space pink noise measurement at 6 ft (1.8 m) at 20% power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

3. Frequency response and sensitivity are half-space measurements.

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005844 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

Dimensional Drawings

1.727

8.500

5.000

8.853

7.000

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005844 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

Architect and Engineer Specications

The unit shall be AtlasIED model IP-ZCM. The PoE+ zone controller shall
be an IP-to-Analog network gateway with Balanced line level outputs for
connection to power amplifiers or 3rd party audio systems. The unit shall
incorporate an 8Ω, 70.7V amplified output to drive analog loudspeaker
zones. It shall include two general purpose inputs and one relay output.
The unit shall incorporate a line level and microphone input.

The amplifier / control board shall receive announcements and messages
using dynamically routed data on a standard Ethernet Network. It shall
include a Single-Channel Class D Topology amplifier with an Primary
Output capable of producing 25-watts RMS when using an IEEE 802.3at
compatible PoE+ switch or 24VDC local power supply and 12-watts RMS
when used with an IEEE 802.3af compliant PoE switch. Interconnect
shall be via female RJ-45 connector mounted to the PCB.

The amplifier / control board shall include (2) logic inputs, (1) relay output,
(1) Auxiliary Mic audio input, (1) Auxiliary Balanced line level audio input,
(1) Balanced line level audio output and (1) Transformer isolated balanced
line level audio output. The Auxiliary Line Level input shall include an auto
mute function that is activated when a broadcast is sensed from the
control application.

The amplifier / control board shall include a Graphical User Interface (GUI)
for SIP configuration. The SIP implementation shall support standards
G.711, G.722 and RTP protocols. The Graphical User Interface (GUI) shall
configure and manage logic inputs, relay outputs, and Auxiliary audio
input.

All control functionality shall be determined via software. It shall be
compatible with AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s
InformaCast software platforms and SIP standalone operation. The I
P-to-Analog network gateway overall dimensions (HxWxD) shall be 1.72"
(44mm) x 8.5" (216mm) x 8.85" (224.8mm). Finish shall be neutral black
electrostatic powder coat.

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005844 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com