Atlas IED IP-SDMF Data Sheet

PoE+ Indoor IP Endpoint with Speaker, LCD, Microphone, and LED Flasher
Features
Network Features
• Dynamic or Static IP Address
• IEEE 802.3 10/100Base-T Ethernet
• IEEE 802.1q Tagging
• IEEE 802.3at Compliant
Audio Codec Support
• G.711 u-law / a-law (16 kbit/s)
• G.722 Wideband Audio (64 kbit/s)
Auto Provisioning
• DHCP Option 66, 150, for TFTP Server
• DHCP Option 72 for HTTP Server
Auto Registration
• SLP for InformaCast
• DHCP Option 72 for Syn-Apps' Revolution
Static Configuration
• HTTP GUI for Static Configuration
Audio Features
• Integrated Amplifier
• Aux Audio Line-In Balanced (2.8Vpp 10K)
• Aux Audio Line-Out Balanced (2.8Vpp 10K)
Additional Features
• 2 General Purpose Inputs
• Cisco SRST
• 1 Relay Output (2A @ 30 VDC)
• Phone / Night Loud Ringer
• External Power Supply Option
• LCD for Clock / Date and Scrolling Text
• Front Panel LED Flashers Allow for ADA Compliance
• Integrated Microphone Allows for Half-Duplex or Full-Duplex Paging Based on Software Platform Used
General Description
AtlasIED IP-SDMF is an indoor wall mount IP endpoint with speaker, integrated talkback microphone, LCD and LED flasher. It compliments the Unified Communications (VoIP Communications) investment including on-premises and hosted infrastructure platforms so that information can be pushed to spaces beyond the world of desktop telephony communication and breaking any traditional audio-path barriers.
Applications
AtlasIED IP-SDMF registers as a communication endpoint directly within InformaCast, GCK, and Syn-Apps' Revolution advanced notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded & scheduled announcements, while leveraging the WAN or LAN network architecture.
When used within a Cisco environment, the IP-SDMF speakers can join Cisco’s Unified Survivable Remote Site Telephony (SRST) as a supported device. Cisco’s SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).
Where 3rd party notification applications are not required, the IP-SDMF speakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts, intercom and public address applications.
Under Title II of the ADA, all state and local governments are required to take steps and ensure effective communication to people with disabilities. The AtlasIED IP-SDMF IP speakers with talkback microphone, LCD display and LED flasher provide effective communication for all individuals.
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005789 RevD 9/19
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM
AtlasIED.com
System
Type PoE+ Indoor IP Speaker System with LCD Display, Microphone and LED Flasher
Indicators Network Status (On Back)
Frequency Response (+/- 5dB) 86Hz - 15.5kHz
Vertical Coverage 105° (2kHz Octave Band, -6dB Points)
Horizontal Coverage 105° (2kHz Octave Band, -6dB Points)
Directivity Factor (Q) 17 @ 2kHz
Max SPL at 1m (Passive) 110dB SPL Continuous
General Purpose Interface Two Trigger Inputs / One Relay Output (2A @ 30 VDC)
Transducers
LF Transducer Qty and Size (1) 8" (203mm)
HF Transducer Qty and Size (1) 3" (76mm)
HF Crossover Frequency 2,800Hz, First Order
Voice Coil Size 1" (25mm)
Cone Material Curvelinear, Treated Industrial Paper
Sensitivity 98dB SPL Average
Amplication
Type Single-Channel Class D Topology with Primary and Secondary Outputs
AC Power Input PoE+ and External 24VDC
Power Rating (RMS) 25 Watts Max (802.3AT)
THD <0.2%
Cooling Passive / Convection
Driver Protection Built-In Limiter
Microphone
Sensitivity Minus 35 (±4dB) / (0db = 1V/pa, 1kHz)
Impedance Less than 2.2kΩ
Directivity Omnidirectional
Frequency Range 20Hz – 20kHz
Standard Operation Voltage 2V
Max. Operation Voltage 10V
Current Consumption Max. 0.5 mA
Sensitivity Reduction Within Minus 3dB @ 1.5V
S/N Ratio More than 62dB
Audio Inputs and Outputs
Input: Analog Audio Type(s) One Balanced Line Level
Input: Analog Connectivity Secured Screw Terminal Block
Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable
Input: Network Connectivity RJ-45 Female
Output: Analog Audio Type(s) One Balanced Line Level
Output: Analog Connectivity Secured Screw Terminal Block
Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast)
Output: Digital Connectivity N/A
Output: Speaker Level 8Ω, 25W (802.3AT)
Output: Speaker Connectivity Primary and Slave Secured Screw Terminal Block
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005789 RevD 9/19
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM
AtlasIED.com
Display
Display Type High Resolution Back-Lit Color LCD Display
Display Color Range Backlit Display - Red, Blue, Green - (With GCK)
Surface Lumens 1900 cd/m^2 Minimum, All White Pixels
Character Max Height 480 Pixels
Viewable Dimensions (H x W) 8.66" (221mm) x 2.23" (57mm)
Control Time via NTP - Text Controlled via Software
Flasher
Flasher Type LED
Flash Color Range RGB
Flasher Illuminance (lux) 83 Red, 545 Green, 90 Blue, 570 White
Flash Rate(s) Multi Speed Capable
Viewable Dimensions (HxW) 0.5" (13mm) x 3.5" (89mm)
Control Controlled via Software
Software
GCK Compatible Version 3.0+
InformaCast Advanced Compatible Version 8.0+
InformaCast Fusion Compatible Version 3.0+
SA-Announce Compatible Versions 9.0.18+
Network
Ethernet IEEE 802.3 10/100Base-T
PoE+ IEEE 802.3AT Compliant
VLAN IEEE 802.1q Tagging
Protocols
IP Addressing DHCP / Static
Auto-Provisioning HTTP / TFTP
Auto-Registration HTTP / Service Location Protocol / IEDNet
Time NTP or Host Server
Telephony SIP
Enclosure
Color White
Grille Material Powder Coated Steel
Baffle Material Plastic
Mounting / Rigging Provisions 4 x Screws
Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC
Ingress Protection N/A
Logo One Color Print
Product Dimensions (HxWxD) 14.37" x 12.87" x 3.42" (365mm x 327mm x 87mm)
Shipping Dimensions (HxWxD) 15.5" x 13.9" x 5.5" (394mm x 353mm x 140mm)
Net Weight - lbs 4.25lb (1.92kg)
Shipping Weight - lbs 6.62lb (3.0kg)
Warranty Coverage
Warranty Period 1 Year
Standard - Blue Text White
NOTES:
1. Sensitivity: Half space pink noise measurement at 6 ft (1.8 m) at 20% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
3. Frequency response and sensitivity are half-space measurements.
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005789 RevD 9/19
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM
AtlasIED.com
Loading...
+ 6 hidden pages