![](/html/53/5368/5368c308e657c7fc4374c285e53476d211d8d9ca9d727632d51f001e795cdf62/bg1.png)
IP-PM8GD
IP Pendant Mount Speaker
Network Features
• Dynamic or Static IP Address
• IEEE 802.3 10/100Base-T Ethernet
• IEEE 802.1q Tagging
• IEEE 802.3af and 802.3at Compliant
Audio Codec Support
• G.711 u-law / a-law (64 kbit/s)
• G.722 Wideband Audio (64 kbit/s)
Auto Provisioning
• DHCP Option 66, 150, or TFTP Server
• DHCP Option 72 for HTTP Server
Auto Registration
• SLP for InformaCast
• DHCP Option 72 for Syn-Apps' Revolution or GCK
Static Conguration
• HTTP GUI for Static Configuration
Audio Features
• Integrated Amplifier
• 15-Watt Total Power
• Primary Speaker Output 8Ω
• Extreme High Efficiency (96dB 1W/1m) Allows for Higher SPL On
Standard PoE Power
• 8" GD87 Driver Provides 105° (52.5° Off-Axis) Coverage In the 2 kHz
Octave Band - 6dB Points
General Description
The AtlasIED IP-PM8GD is an indoor Pendent mount IP loudspeaker
It compliments the Unified Communications (VoIP Communications)
investment including on-premises and hosted infrastructure platforms so
that information can be pushed to spaces beyond the world of desktop
telephony communication and breaking any traditional audio-path barriers.
General Description
AtlasIED IP-PM8GD registers as a communication endpoint directly
within InformaCast, GCK, and Syn-Apps' Revolution advanced
notification applications, supporting audio broadcast to enhance physical
security while improving day-to-day communications through advanced
alerting, bell schedules, pre-recorded & scheduled announcements,
while leveraging the WAN or LAN network architecture.
The ability of LAN communication between any combination of phones
and loudspeakers is particularly critical during an emergency (which may
be the actual cause of the WAN outage).
Where 3rd party notification applications are not required, the IP-PM8GD
loudspeakers can register as SIP devices directly to a SIP server or
VoIP Communications Manager for critical alerts and public address
applications.
Attaching the IP-PM8GD to most overhead surfaces is a breeze. For
open beam ceilings a 3 meter cable kit is included with a self-gripping
ferrule system. If down pipe installation from hard ceiling material is
required, any
readily available under the FANTEC™ brand from home improvement
stores with various down pipe length options to provide installation ease
regardless of ceiling material angle (Up to 45°).
Either installation solution is discreetly implemented via the PM series
innovative top cover design. This “cap” includes a cable access plug that
is easily removed for down pipe mounting. The cover also completely
conceals the Ethernet cable terminations and the suspension anchor
points.
3
/4" ceiling fan installation kit may be utilized. These kits are
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005843 RevA 4/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com
![](/html/53/5368/5368c308e657c7fc4374c285e53476d211d8d9ca9d727632d51f001e795cdf62/bg2.png)
System
Type PoE+ Indoor IP Loudspeaker System
Operation Mode Self Powered
Indicators Network Status
Operating Range (-10db) 70Hz - 15.5kHz
Frequency Response (+/- 5dB) 86Hz - 15.5kHz
Vertical Coverage 105° 800Hz - 4kHz
Horizontal Coverage 105° 800Hz - 4kHz
Directivity Factor (Q) 4.7 @ 2 kHz
Max SPL at 1m (Passive) 106dB SPL Continuous / 109dB SPL Peak
Recommended Signal Processing Built-In Processing
Transducers
Transducer Qty and Size 8"
Voice Coil Size 1"
Cone Material Curvelinear, Treated Industrial Paper
Driver Protection Built-In Limiter
Amplication
Type Single-Channel Class D Topology
AC Power Input PoE or PoE+
Power Rating (RMS) 15 Watts Max (802.3AT)
THD <.02%
Cooling Passive / Convection
Audio Inputs and Outputs
Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable
Input: Network Connectivity RJ-45 Female
Output: Digital Audio Type(s) N/A
Output: Digital Connectivity N/A
Output: Loudspeaker Level 8Ω, 9W (802.3AF), 15W (802.3AT)
Output: Loudspeaker Connectivity Two x Secured Screw Terminal Block
Software
Syn-Apps' Revolution Compatible Versions 2018.4.2+
InformaCast Compatible Version 8.0+
GCK Compatible Version 3.0+
Network
Ethernet IEEE 802.3 10/100Base-T
PoE IEEE 802.3AF/AT Compliant
VLAN IEEE 802.1q Tagging
Protocols
IP Addressing DHCP / Static
Auto-Provisioning HTTP / TFTP
Auto-Registration HTTP / Service Location Protocol / IEDNet
Time NTP
Telephony SIP
©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005843 RevA 4/19
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
SUPPORT@ATLASIED.COM
AtlasIED.com