Atlas IED IP-DD Datasheet

Download

Page 1

IP-DDS / IP-DD

IP Dual Sided LCD With or Without Speakers

Features

Network Features

• Dynamic or Static IP Address

• IEEE 802.3 10/100Base-T Ethernet

• IEEE 802.1q Tagging

• IEEE 802.3af and 802.3at Compliant

Audio Codec Support

• G.711 u-law / a-law (16 kbit/s)

• G.722 Wideband Audio (64 kbit/s)

Auto Provisioning

• DHCP Option 66, 150, for TFTP Server

• DHCP Option 72 for HTTP Server

Auto Registration

• SLP for InformaCast

• DHCP Option 72 for Syn-Apps' Revolution

Static Configuration

• HTTP GUI for Static Configuration

Audio Features

• Integrated Amplifier

• Aux Audio Line-In Balanced (2.8Vpp 10K)

• Aux Audio Line-Out Balanced (2.8Vpp 10K)

Additional Features

• 2 General Purpose Inputs

• Cisco SRST

• 1 Relay Output (2A @ 30 VDC)

• Phone / Night Loud Ringer

• External Power Supply Option

• Two LCD's for Clock / Date and Scrolling Text

• LED Flashers Allow for ADA Compliance

General Description

Model IP-DDS is an indoor dual sided LCD display incorporating loudspeakers and LED flasher. Model IP-DD is an indoor dual sided LCD display incorporating an LED flasher. They can display time as well as scrolling text and leverage the VoIP communication solution to extend notifications with effective visual text alerts for high ambient noise areas or large spaces.

Applications

Models IP-DDS and IP-DD register as communication endpoints directly within InformaCast, GCK, and Syn-Apps' Revolution advanced notification applications, supporting message broadcasts to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded & scheduled announcements, while leveraging the WAN or LAN network architecture.

Model IP-DDS is a double sided enclosure containing dual LCDs, integrated LED flasher, and paging speakers. Model IP-DD is a double sided enclosure containing dual LCDs that can display time as well as scrolling text. Both models also features LED flashers located below the display that can be used to alert room occupants of incoming scrolling text messages in accordance with ADA compliance.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005792 RevC 2/19

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Page 2

System

Type IP Dual Sided LCD Display With or Without Speakers

Operation Mode N/A

Indicators Network Status (On Back)

Operating Range (-10db) (IP-DDS Only)

Coverage (IP-DDS Only)

Max SPL at 1m (Passive) 93dB SPL Continuous / 96dB SPL Peak

Recommended Signal Processing (IP-DDS Only)

General Purpose Interface Two Trigger Inputs / One Relay Output (2A @ 30 VDC)

Transducers (IP-DDS Only)

Transducer Qty and Size (1) 3" (76mm) - Per Side

Voice Coil Size 0.5" (13mm)

Cone Material Treated Industrial Paper

Amplication

Type Single-Channel Class D Topology

AC Power Input PoE+ and External 24VDC (Recommend TSD-PS24V2500MA)

Power Rating (RMS) 12 Watts Max (802.3af) / 25 Watts Max (802.3at)

THD <0.2%

Cooling Passive / Convection

Driver Protection Built-In Limiter

Audio Inputs and Outputs

Input: Analog Audio Type(s) One Balanced Analog

Input: Analog Connectivity Secured Screw Terminal Block

Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable

Input: Network Connectivity RJ-45 Female

Output: Analog Audio Type(s) One Balanced Line Level

Output: Analog Connectivity Secured Screw Terminal Block

Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast)

Output: Digital Connectivity N/A

Output: Speaker Level 8Ω, 12W (802.3AF), 25W (802.3AT)

Output: Speaker Connectivity Two x Secured Screw Terminal Block

Display

Display Type High Resolution Back-Lit Color LCD

Display Color Range Backlit Display - Red, Blue, Green - (With GCK)

Surface Lumens 1900 cd/m^2 Minimum, All White Pixels

Character Max Height 480 Pixels

Viewable Dimensions (HxW) 8.66" (221mm) x 2.23" (57mm)

Control Time via NTP - Text Controlled via Software

Flasher

Flasher Type LED

Flash Color Range RGB

Flasher Lumens 83 Red, 545 Green, 90 Blue, 570 White

Flash Rate(s) Multi Speed Capable

Viewable Dimensions (HxW) 0.5" (13mm) x 3.5" (89mm)

Control Controlled via Software

250Hz - 9kHz

95° 800Hz - 4kHz

Built-In Processing

Standard - Blue Text White

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005792 RevC 2/19

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Page 3

Software

GCK Compatible Version 3.0+

InformaCast Advanced Compatible Version 8.0+

InformaCast Fusion Compatible Version 3.0+

SA-Announce Compatible Versions 9.0.18+

Network

Ethernet IEEE 802.3 10/100Base-T

PoE IEEE 802.3 AF/AT Compliant

VLAN IEEE 802.1q Tagging

Protocols

IP Addressing DHCP / Static

Auto-Provisioning HTTP / TFTP

Auto-Registration HTTP / Service Location Protocol / IEDNet

Time NTP

Telephony SIP

Enclosure

Color White

Mounting / Rigging Provisions Mounting Plate Provided with Various Hole Patterns for Wall or Ceiling Mount

Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC

Ingress Protection N/A

Logo One Color Print

Product Dimensions (HxWxD) 9.9" x 20.42" x 6.91" (251mm x 519mm x 176mm)

Shipping Dimensions (HxWxD) 10.6" x 25.4" x 12.8" (269mm x 645mm x 325mm)

Net Weight - lbs 11.22lb (5.09kg) IP-DD, 14.2lb (6.44kg) IP-DDS

Shipping Weight - lbs 16.11lb (7.30kg) IP-DD, 18.23lb (8.27kg) IP-DDS

Warranty Coverage

Warranty Period 1 Year

NOTES:

1. Sensitivity: Half space pink noise measurement at 6 ft (1.8 m) at 20% power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

3. Frequency response and sensitivity are half-space measurements.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005792 RevC 2/19

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Page 4

Dimensional Drawings

6.91 9.91

16.21

8.11

20.42

4.21

6.91

6.64

6.41

5.25

6.52

6.91 9.91

8.11

20.42

4.21

6.91

6.64

6.41

6.52

4.03

6.52

5.25

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005792 RevC 2/19

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Page 5

Mounting Options

16.21

10.85

REMOVE 6 SCREWS

TO REMOVE TOP

SWAP POSITIONS

MAY BE MOUNTED ON MOST STYLES OF WALL

OR CEILING BOXES

REMOVE SET SCREW AND

UNHOOK TO REMOVE

COVER PLATE FROM WALL

BRACKET

REMOVE 4 SCREWS TO

REMOVE FROM WALL

BRACKET

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005792 RevC 2/19

POE NETWORK CONNECTION

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com

Page 6

Architect and Engineer Specications

The unit shall be AtlasIED model IP-DDS. The PoE+ Indoor IP Endpoint Visual System shall consist of a factory assembled double sided wall or ceiling mount enclosure containing 2 LCD displays that can display time and date as well as scrolling text. The model shall also feature LED flashers located below the display can be used to alert room occupants of an incoming scrolling text message in accordance with ADA compliance. The unit shall incorporate 3" loudspeaker drivers on each side of the display.

The speakers shall be an 3" (76mm) in diameter full range transducer each mounted next to LCD display on opposite sides within the metal housing. The speaker dispersion shall be 135° and frequency response range shall be 800Hz – 4kHz, (±5dB). Sensitivity shall be 92dB at 1 Watt/1 meter. Voice coil impedance shall be 8Ω.

The amplifier / control board shall receive announcements and messages using dynamically routed data on a standard Ethernet Network. It shall include a Single-Channel Class D Topology amplifier with Primary and Secondary Outputs capable of producing 25-watts RMS when using an IEEE 802.3at compatible PoE+ switch or 24VDC local power supply and 12-watts RMS when used with an IEEE 802.3af compliant PoE switch. Interconnect shall be via female RJ-45 connector mounted to the PCB.

The amplifier / control board shall include (2) logic inputs, (1) relay output, (1) Auxiliary Balanced line level audio input and (1) Balanced line level audio output. The Auxiliary Line Level input shall include an auto mute function that is activated when a broadcast is sensed from the control application.

The amplifier / control board shall include a Graphical User Interface (GUI) for SIP configuration. The SIP implementation shall support standards G.711, G.722 and RTP protocols. The Graphical User Interface (GUI) shall configure and manage logic inputs, relay outputs, and Auxiliary audio input.

The unit shall incorporate a High-Resolution Back-Lit color LCD display with viewable dimensions of 8.66" (221mm) wide x 2.23" (57mm) high. It shall receive visual notifications by AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s InformaCast software platforms. It shall display time when in standby mode from AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s InformaCast software platforms or by NTP. The display shall produce 1900 cd/m^2 lux brightness and display text and/or time.

The unit shall incorporate a LED flasher with viewable dimensions of

0.5" (13mm) height x 3.5" (89mm) wide. The LEDs shall be able to produce RGB color spectrum with brightness of 310-lux (Red), 348-lux (Green), 352-lux (Blue). It shall have the capability of multi-speed flash rate and will be software controllable.

All control functionality shall be determined via software. It shall be compatible with AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s InformaCast software platforms and SIP standalone operation. The Indoor IP Endpoint Visual System overall dimensions shall be 9.9" (251mm) x 20.42" (519mm) x 6.91" (176mm) HxWxD.

The unit shall be AtlasIED model IP-DD. The PoE+ Indoor IP Endpoint Visual System shall consist of a factory assembled double sided wall or ceiling mount enclosure containing 2 LCD displays that can display time and date as well as scrolling text. The model shall also feature LED flashers located below the display can be used to alert room occupants of an incoming scrolling text message in accordance with ADA compliance.

The amplifier / control board shall receive announcements and messages using dynamically routed data on a standard Ethernet Network. It shall include a Single-Channel Class D Topology amplifier with Primary and Secondary Outputs capable of producing 25-watts RMS when using an IEEE 802.3at compatible PoE+ switch or 24VDC local power supply. Interconnect shall be via female RJ-45 connector mounted to the PCB.

The unit shall incorporate a High-Resolution Back-Lit color LCD display with viewable dimensions of 8.66" (221mm) wide x 2.23" (57mm) high. It shall receive visual notifications by AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s InformaCast software platforms. It shall display time and date when in standby mode from AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s InformaCast software platforms or by NTP. The display shall produce 1900 cd/m^2 lux brightness and display text and/or time.

The unit shall incorporate a LED flasher with viewable dimensions of

0.5" (13mm) height x 3.5" (89mm) wide. The LEDs shall be able to produce RGB color spectrum with brightness of 83-lux (Red), 545-lux (Green), 90-lux (Blue), 570-lux (White). It shall have the capability of multi-speed flash rate and will be software controllable.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005792 RevC 2/19

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333 SUPPORT@ATLASIED.COM

AtlasIED.com