IPDCM+
PoE+ Indoor Wall Mount LED Display with Integrated Microphone
1/6
Features
Network Features
• Network Controlled, High Visibility Red LED Display
• Dynamic or Static IP Address
• IEEE802.3 10/100Base-T Ethernet
• IEEE 802.1q Tagging
• IEEE 802.3AT Compliant
Auto Provisioning
• DHCP Option 66, 150, or TFTP Server
• DHCP Option 72 for HTTP Server
Auto Registration
• SLP for InformaCast
• DHCP Option 72 for SA-Announce or GCK
Static Configuration
• HTTP GUI for Static Configuration
• Cisco SRST
Audio Features
• Integrated Amplifier
• 15-Watt Tot al Power
• Primary Speaker Output 8Ω
• Aux Audio Line-In Unbalanced (2.8Vpp 10K)
• Aux Audio Line-Out Unbalanced (2.8Vpp 10K)
Additional Features
• 2 General Purpose Inputs
• 1 Relay Output (2A @ 30 VDC)
• External Power Supply Option
• 16 x 64 LED Display for Clock or Scrolling Text
• Integrated Microphone Allows for Half-Duplex or Full-Duplex Paging
Based on Software Platform
General Description
AtlasIED IPDCM+ is an indoor wall mount IP LED display with integrated
talkback microphone. It leverages VoIP communication solutions to
extend notifications with effective visual text alerts for high ambient
noise areas or large spaces.
Applications
AtlasIED IPDCM+ registers as a communication endpoint directly within
InformaCast, SA-Announce and GCK Advanced Notification applications,
supporting their visual text broadcast to enhance physical security while
improving day-to-day communications through advanced alerting, bell
schedules, pre-recorded & scheduled announcements, while leveraging
the WAN/LAN Network Architecture.
In addition to visual signaling, the IPDCM+ can provide audio to support
distributed analog public address systems with the convenience of line
level and amplified audio outputs. This line level output is ideal for use
with AtlasIED AA, PA, DPA, or CP series amplifiers to power large zones
of traditional 25V, 70.7V, or 100V AtlasIED loudspeakers or paging horn
loudspeakers.
In addition to the line level output, the IPDCM+ provides 2-channels of
15-Watt RMS at 8-ohm amplified output to drive external loudspeakers.
It also includes 2 GPI inputs, 1 GPI output and a microphone input for
talk back or listen applications.
Under Title II of the ADA, all state and local governments are
required to take steps and ensure effective communication to people
with disabilities. The AtlasIED IPDCM+ display with talkback microphone
provides effective communication for all individuals.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005307 RevA 2/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
System
Type PoE+ Indoor IP LED Display with Microphone
Operation Mode Self Powered
Indicators Network Status (On Back)
General Purpose Interface Two Trigger Inputs / One Relay Output (2A @ 30 VDC)
Amplication (to power external speakers)
Type Single-Channel Class D Topology
AC Power Input PoE or PoE+ and External 24VDC
Power Rating (RMS) 15 Watts Max (802.3AT)
THD <.02%
Cooling Passive/Convection
Microphone
Sensitivity Minus 35 (±4dB) / (0db = 1V/pa, 1kHz)
Impedance Less than 2.2kΩ
Directivity Omnidirectional
Frequency Range 20Hz – 20kHz
Standard Operation Voltage 2V
Max. Operation Voltage 10V
Current Consumption Max. 0.5 mA
Sensitivity Reduction Within Minus 3dB @ 1.5V
S/N Ratio More than 62dB
Audio Inputs and Outputs
Input: Analog Audio Type(s) One Unbalanced Analog
Input: Analog Connectivity Secured Screw Terminal Block
Input: Network Audio Type(s) G.711 U-Law/A-Law and G.722 Capable
Input: Network Connectivity RJ-45 Female
Output: Analog Audio Type(s) One Unbalanced Line Level
Output: Analog Connectivity Secured Screw Terminal Block
Output: Digital Audio Type(s) N/A
Output: Digital Connectivity N/A
Output: Loudspeaker Level 8Ω, 9W (802.3AF), 15W (802.3AT)
Output: Loudspeaker Connectivity Two x Secured Screw Terminal Block
Display
Display Type LED Display
Display Color Range Red Only
Display Lumens 162lux
LED's Per Character 16 x 64
Character Max Height 2.125" (54mm)
Viewable Dimensions (HxW) 10.125" (257mm) x 2.5625" (65mm)
Control Time via NTP - Text Controlled via Software
Software
SA-Announce Compatible Versions 9.0.18+
InformaCast Compatible Version 8.0+
GCK Compatible Version 3.0+
Network
Ethernet IEEE802.3 10/100Base-T
PoE IEEE802.3AF/AT Compliant
VLAN IEEE802.1q Tagging
Protocols
IP Addressing DHCP/Static
Auto-Provisioning HTTP/TFTP
Auto-Registration HTTP/Service Location Protocol/IEDNet
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005307 RevA 2/16
2/6
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Time NTP
Telephony SIP
Enclosure
Color White (RAL 9010)
Grille Material Powder Coated Steel, White Finish, Paintable
Baffle Material 18-gauge Corrosion-Resistant Zinc Plated Steel
Mounting/Rigging Provisions Mounting Enclosure is Not Included (See Optional Enclosure)
Safety Agency Ratings ETL Listed to Comply with UL-60950-1, and CAN/CSA-C22.2 No. 60950-1
Ingress Protection IP-30
Logo Blue and Removable
Product Dimensions (HxWxD) 7.75" (196.85mm) x 13.89" (352.81mm) x 3.25" (82.55mm)
Shipping Dimensions (HxWxD) 10" (254mm) x 15.9" (403.8mm) x 6" (152.4mm)
Net Weight - lbs 2.2 lbs (.99kg)
Shipping Weight - lbs 3 lbs (1.4kg)
Warranty Coverage
Warranty Period 1 Year
NOTES:
1. Sensitivity: Half space pink noise measurement at 6 ft (1.8 m) at 20% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
3. Frequency response and sensitivity are half-space measurements.
3/6
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005307 RevA 2/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Dimensional Drawings
IP SPEAKER
CONNECTOR
BLOCK (PIN 1)
SERVICE
SWITCH
FORCE
DISCOVERY
JUMPERS A,B,C
13.88
D
C
B
4
3
2
1
E
F
D
5
4
3
2
1
E
F
1.81
1.56
RJ45 NETWORK
AUX POWER
24VDC @ 1A
IP SPEAKER
CONNECTOR
BLOCK (PIN 1)
SERVICE
SWITCH
FORCE
DISCOVERY
JUMPERS A,B,C
7.75 4.88
12.00
13.88
IP SPEAKER CONNECTOR BLOCK
PIN
FUNCTION
1
REMOTE BUTTON / GPI 2 (+)
2
REMOTE BUTTON / GPI 2 (-)
3
REMOTE BUTTON / GPI 1 (+)
4
REMOTE BUTTON / GPI 1 (-)
5
RELAY (-)
6
RELAY - NORMALLY OPEN (+)
7
LINE-IN (-)
8
LINE-IN (+)
9
LINE-OUT (-)
10
LINE-OUT (+)
11
PRIMARY SPEAKER (-)
12
PRIMARY SPEAKER (+)
13
SECONDARY SPEAKER (-)
14
SECONDARY SPEAKER (+)
D
C
B
8
7
6
5
4
3
2
1
E
F
RJ45 NETWORK
AUX POWER
24VDC @ 1A
IP SPEAKER
CONNECTOR
BLOCK (PIN 1)
SERVICE
SWITCH
FORCE
DISCOVERY
JUMPERS A,B,C
7.75 4.88
12.00
13.88
IP SPEAKER CONNECTOR BLOCK
PIN
FUNCTION
1
REMOTE BUTTON / GPI 2 (+)
2
REMOTE BUTTON / GPI 2 (-)
3
REMOTE BUTTON / GPI 1 (+)
4
REMOTE BUTTON / GPI 1 (-)
5
RELAY (-)
6
RELAY - NORMALLY OPEN (+)
7
LINE-IN (-)
8
LINE-IN (+)
9
LINE-OUT (-)
10
LINE-OUT (+)
11
PRIMARY SPEAKER (-)
12
PRIMARY SPEAKER (+)
13
SECONDARY SPEAKER (-)
14
SECONDARY SPEAKER (+)
D
C
B
5
4
3
2
1
E
F
ATLAS SOUND
A MITEK COMPANY
4/6
12.00
7.75 4.88
IP SPEAKER CONNECTOR BLOCK
PIN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
RJ45 NETWORK
AUX POWER
24VDC @ 1A
FUNCTION
REMOTE BUTTON / GPI 2 (+)
REMOTE BUTTON / GPI 2 (-)
REMOTE BUTTON / GPI 1 (+)
REMOTE BUTTON / GPI 1 (-)
RELAY (-)
RELAY - NORMALLY OPEN (+)
LINE-IN (-)
LINE-IN (+)
LINE-OUT (-)
LINE-OUT (+)
PRIMARY SPEAKER (-)
PRIMARY SPEAKER (+)
SECONDARY SPEAKER (-)
SECONDARY SPEAKER (+)
IP SPEAKER
CONNECTOR
BLOCK (PIN 1)
SERVICE
SWITCH
FORCE
DISCOVERY
JUMPERS A,B,C
1.56
1.81
MICROPHONE
(IF IPDCM+)
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005307 RevA 2/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Optional Accessories
9.00
3.38
4.50 3.38
17.99
13.00
12.00
4.88
2.97
13.83
3.00
12.00
4.88 7.71
13.83
3.00
4.50 3.38
9.00
3.38
4.50 3.38
9.00
3.38
IPDC-FEC
5/6
IPDC-SEC
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005307 RevA 2/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Architect and Engineer Specications
The unit shall be an AtlasIED Model IPDCM+. It is an indoor wall
mount IP display with integrated talkback microphone. It incorporates
an amplifier/control board capable of producing 15-watts RMS when
using an IEEE 802.3at compatible PoE+ switch or 24VDC local power
supply and 9-watts RMS when used with an IEEE 802.3af compliant PoE
switch. Interconnect shall be via female RJ-45 connector mounted to the
PCB.
The unit shall incorporate an integrated microphone to allow full duplex
talkback communication functionality based upon chosen software
platform.
The unit shall incorporate a LED display with viewable dimensions of
10.125" (2577mm) wide x 2.56" (65mm) high. The LEDs per character
shall be 16 high x 64 wide and character max height of 2.125" (54mm).
It shall produce the color red and be controlled by Time via NTP. The
display shall produce 162 lux brightness and display text and/or time.
All control functionality shall be determined via software. The baffle
enclosure's overall dimensions shall be 7.75" (196.85mm) x 13.89"
(352.81mm) x 3.25" (82.55mm)HxWxD. Finish shall be neutral
white electrostatic powder coat.
Optional enclosures shall include:
IPDC-FEC Flush Mount Straight Enclosure for IPDCM+
IPDC-SEC Surface Mount Straight Enclosure for IPDCM+
6/6
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005307 RevA 2/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Loading...