Atlas IED IP-12SYSM Datasheet

IP-12SYSM

PoE+ Indoor 1' x 2' Suspended Ceiling Mount IP Endpoint Speaker with Microphone

Features

Network Features

• Dynamic or Static IP Address

• IEEE 802.3 10/100Base-T Ethernet

• IEEE 802.1q Tagging

• IEEE 802.3af and 802.3at Compliant

Audio Codec Support

• G.711 u-law / a-law (16 kbit/s)

• G.729 Wideband Audio (64 kbit/s)

Auto Provisioning

• DHCP Option 66, 150, or TFTP Server

• DHCP Option 72 for HTTP Server

Auto Registration

• SLP for InformaCast

• DHCP Option 72 for Syn-Apps' Revolution or GCK

Static Configuration

• HTTP GUI for Static Configuration

• Cisco SRST

Audio Features

• Integrated Amplifier

• Aux Audio Line-In Balanced (2.8Vpp 10K)

• Aux Audio Line-Out Balanced (2.8Vpp 10K)

Additional Features

• 2 General Purpose Inputs

• 1 General Purpose Output (2A @ 30 VDC)

• Phone / Night Loud Ringer

• External Power Supply Option

• Integrated Microphone Allows for Half-Duplex or Full-Duplex Paging
Based on Software Platform

General Description

AtlasIED IP-12SYSM is a 1' x 2' suspended ceiling mount IP speaker
with integrated microphone. It compliments the Unified Communications
(VoIP Communications) investment including on-premises and hosted
infrastructure platforms so that information can be pushed to spaces
beyond the world of desktop telephony communication and breaking any
traditional audio-path barriers.

Applications

AtlasIED IP-12SYSM registers as a communication endpoint directly
within InformaCast, GCK, and Syn-Apps' Revolution advanced
notification applications, supporting audio broadcast to enhance physical
security while improving day-to-day communications through advanced
alerting, bell schedules, pre-recorded & scheduled announcements,
while leveraging the WAN or LAN network architecture.

When used within a Cisco environment, the IP-12SYSM speakers can
join Cisco’s Unified Survivable Remote Site Telephony (SRST)
as a supported device. Cisco’s SRST provides remote location
call-processing redundancy when access to the centralized Cisco
Unified Communications Manager is interrupted because of a WAN
outage. The ability of LAN communication between any combination of
phones and speakers is particularly critical during an emergency (which
may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the IP-12SYSM
suspended ceiling mount speaker with integrated microphone can
register as SIP devices directly to a SIP server or VoIP Communications
Manager for critical alerts and public address applications.

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005791 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

System

Type PoE+ Indoor 1' x 2' Suspended Ceiling Mount IP Speaker with Microphone

Indicators Network Status (On Back)

Frequency Response (+/- 5dB) 86Hz - 15.5kHz

Vertical Coverage 105° (2kHz Octave Band, -6dB Points)

Horizontal Coverage 105° (2kHz Octave Band, -6dB Points)

Directivity Factor (Q) 17 @ 2 kHz

Max SPL at 1m (Passive) 110dB SPL Continuous

General Purpose Interface Two Trigger Inputs / One Relay Output (2A @ 30 VDC)

Transducers

LF Transducer Qty and Size (1) 8" (203mm)

HF Transducer Qty and Size (1) 3" (76mm)

HF Crossover Frequency 2,800Hz, First Order

Voice Coil Size 1" (25mm)

Cone Material Curvelinear, Treated Industrial Paper

Sensitivity 98dB SPL Average

Amplication

Type Single-Channel Class D Topology with Primary and Secondary Outputs

AC Power Input PoE or PoE+ and External 24VDC

Power Rating (RMS) 12 Watts Max (802.3AF) / 25 Watts Max (802.3AT)

THD <.02%

Cooling Passive / Convection

Driver Protection Built-In Limiter

Microphone

Sensitivity Minus 35 (±4dB) / (0db = 1V/pa, 1kHz)

Impedance Less than 2.2kΩ

Directivity Omnidirectional

Frequency Range 20Hz – 20kHz

Standard Operation Voltage 2V

Max. Operation Voltage 10V

Current Consumption Max. 0.5 mA

Sensitivity Reduction Within Minus 3dB @ 1.5V

S/N Ratio More than 62dB

Audio Inputs and Outputs

Input: Analog Audio Type(s) One Balanced Line Level

Input: Analog Connectivity Secured Screw Terminal Block

Input: Network Audio Type(s) G.711 U-Law / A-Law and G.722 Capable

Input: Network Connectivity RJ-45 Female

Output: Analog Audio Type(s) One Balanced Line Level

Output: Analog Connectivity Secured Screw Terminal Block

Output: Digital Audio Type(s) G.711 U-Law / A-Law and G.722 Capable (Multicast)

Output: Digital Connectivity N/A

Output: Speaker Level 8Ω, 12W (802.3AF), 25W (802.3AT)

Output: Speaker Connectivity Primary and Slave Secured Screw Terminal Block

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005791 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

Software

GCK Compatible Version 3.0+

InformaCast Advanced Compatible Version 8.0+

InformaCast Fusion Compatible Version 3.0+

SA-Announce Compatible Versions 9.0.18+

Network

Ethernet IEEE 802.3 10/100Base-T

PoE IEEE 802.3 AF/AT Compliant

VLAN IEEE 802.1q Tagging

Protocols

IP Addressing DHCP / Static

Auto-Provisioning HTTP / TFTP

Auto-Registration HTTP / Service Location Protocol / IEDNet

Time NTP or Host Server

Telephony SIP

Enclosure

Color White

Grille Material Powder Coated Steel with 22-Gauge Perforated Steel

Baffle Material 19-Guage Corrosion-Resistant Zinc Plated Steel

Mounting / Rigging Provisions Lay-In Into a Reflected Ceiling Grid

Safety Agency Ratings ETL Listed to Comply with 62368-1, CSA C22.2 #62368-1, IEC 62368-1 CB Scheme and FCC

Ingress Protection N/A

Logo Black and Silver

Product Dimensions (HxWxD) 4.89" x 23.67" x 11.94" (124mm x 601mm x 303mm)

Shipping Dimensions (HxWxD) 5" x 24.75" x 12" (127mm x 629mm x 305mm)

Net Weight - lbs 10.71lb (4.86kg)

Shipping Weight - lbs 13.21lb (5.99kg)

Warranty Coverage

Warranty Period 1 Year

NOTES:

1. Sensitivity: Half space pink noise measurement at 6 ft (1.8 m) at 20% power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

3. Frequency response and sensitivity are half-space measurements.

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005791 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

C803A Polars (Normalized to Zero on Axis) (-6dB)

Ohms

C803A Impedance

SPL in dB

C803A Frequency Response

Polars Are Normalized To Zero On Axis (-6dB)

Frequency Response

Frequency (Hz)

Impedance

Frequency (Hz) Octave Smoothing = 30.0%

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005791 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

Dimensional Drawings

11.94

4.19

23.67

4.89

5.06

11.94

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005791 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com

Architect and Engineer Specications

The unit shall be AtlasIED model IP-12SYSM. The PoE+ Indoor 1' x 2'
Suspended Ceiling Mount IP Endpoint Speaker System shall include
factory assembled speaker, IP addressable PCB amplifier / control, steel
perf baffle, and integrated microphone.

The speaker shall be an 8" Coaxial driver with low-frequency reproducer
cone shall be a full 8" (203mm) in diameter and the high frequency
reproducer cone shall be 3" (76mm) in diameter. The woofer shall have
a 10oz. (260g) ceramic magnet; the tweeter shall have a 2.35oz. (67g)
ceramic magnet. The two reproducer sections shall be coupled through a
built-in crossover network.

The crossover frequency shall be at 2800Hz. The speaker dispersion shall
be 105° and frequency response range shall be 86Hz – 15.5kHz, (±5dB).
Sensitivity shall be 98dB at 1 Watt/1 meter. Voice coil impedance shall be
8Ω. Low frequency voice coil diameter shall be 1" (25mm) and operate
in a magnet field of at least 10,600 gauss. The maximum depth of the
loudspeaker shall not exceed 27/8" (73mm).

The amplifier / control board shall receive announcements and messages
using dynamically routed data on a standard Ethernet Network. It shall
include a Single-Channel Class D Topology amplifier with Primary and
Secondary Outputs capable of producing 25-watts RMS when using an
IEEE 802.3at compatible PoE+ switch or 24VDC local power supply and
12-watts RMS when used with an IEEE 802.3af compliant PoE switch.
Interconnect shall be via female RJ-45 connector mounted to the PCB.

The amplifier / control board shall include (2) logic inputs, (1) relay output,
(1) Auxiliary Balanced line level audio input and (1) Balanced line level
audio output. The Auxiliary Line Level input shall include an auto mute
function that is activated when a broadcast is sensed from the control
application.

The unit shall incorporate an integrated microphone to allow full duplex
talkback communication functionality based upon chosen software
platform.

All control functionality shall be determined via software. It shall be
compatible with AtlasIED’s GCK, Syn-Apps' Revolution, Singlewire’s
InformaCast software platforms and SIP standalone operation. The
PoE+ Indoor 1' x 2' Suspended Ceiling Mount IP Endpoint Speaker
System overall dimensions shall be 11.94" (303mm) x 23.6" (601mm) x 5"
(128mm). Finish shall be neutral white electrostatic powder coat micro
perforated grille.

The amplifier / control board shall include a Graphical User Interface (GUI)
for SIP configuration. The SIP implementation shall support standards
G.711, G.722 and RTP protocols. The Graphical User Interface (GUI) shall
configure and manage logic inputs, relay outputs, and Auxiliary audio
input.

©2019 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005791 RevC 2/19

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
[e-mail]

AtlasIED.com