Atlas IED IED5401CS-H Datasheet

5404CS / 5401CS

GLOBALCOM® 5400 Series Digital Microphone Station

9701 Taylorsville Road

Louisville, KY 40299, USA

phone [phone]

fax [phone]

www.iedaudio.com

Features

The 5404CS/5401CS digital microphone station provides immediate

high-quality digitization of full bandwidth audio, and transmission over a

standard Ethernet connection. The microphone stations utilize the IED

501HH teardrop handheld microphone that includes a programmable

push-to-talk switch. The station uses a metal magnet landing area for the

501HH to provide a storage position for the microphone.

In the standard configuration, the microphone stations can be mounted

using a standard 2-gang electrical box or a 1-gang electrical box using the

included plastic backbox. An optional weighted based (IEDA530DTB) is

available for desktop mounting configurations.

The microphone stations have indicators for power, busy and ready states,

as well as a beeper to alert the operator during certain states of the

microphone station.

Buttons

The 5404CS digital microphone station features four selection buttons.

These buttons are configured using the IED 5400 Designer software to

function as one-touch action buttons to trigger any of the following types

of announcements or messages:

• A live page to a designated zone group

• A recorded (delayed) page to a designated zone group

• A permanent message playback to a designated zone group
(e.g., customer reminder or emergency message)

General Description

The IED 5404CS digital microphone station is a 4-button device for

initiating audio / visual announcements, messages and pages with the

5400ACS Announcement Control Systems. The 5401CS is a push-to-talk

switch only digital microphone station. It is a network appliance with a

unique IP address that requires no configuration.

Just like IED’s other digital microphone stations, the 5404CS/5401CS uses

a single Ethernet interface for audio and control data. The 5404CS/5401CS

is fully compatible with IEEE 802.3af standard for Power over Ethernet

(PoE), allowing the microphone station to be powered directly from any

standard off-the-shelf PoE switch.

These microphone stations, like all IED LAN-based GLOBALCOM®

and 5400ACS components, are designed to maximize the benefits of

a standard 100 Mbps Ethernet LAN-based network, using off-the-shelf

switches and structured CAT5e or better cabling. The 5404CS/5401CS

utilize Dante® technology for transporting high-quality, low-latency digital

audio over Ethernet.

The 5404CS or 5401CS microphone stations may be used as part of an

EN 54-16 listed life safety system; although the mic stations themselves

are not EN 54-16 listed and cannot be used for the emergency locations.

Instead, in a dual-use system, these microphone stations may be used for

everyday paging functions.

©2015 Innovative Electronic Designs LLC. All Rights Reserved. IED is a Registered Trademark of Innovative Electronic Designs LLC. All other trademarks are the property
of their respective owners and no endorsement is implied. Due to continual product development, specifications are subject to change without notice.

IED005136 RevA 3/15

Specifications

Network Requirements

Electrical:
Frequency Response +2 dB, -5 dB
22 Hz - 22 kHz, Input Level = -20 dBu
Total Harmonic Distortion, THD <1%
22 Hz - 22 kHz, Input Level = 0 dBu
Signal-to-Noise Ratio, S/N >85 dB
22 Hz - 22 kHz, Input Level = 0 dBu

Compressor:
Compression Threshold –14 dBu
Attack Time 35 mSec
Release Time 0.5 Sec
Analog-to-Digital Converter, A/D 24 bit
Sample Rate 48 kHz

Mechanical:
Desktop Size 5.13" W x 4.89" H x 5.66" D
Wall Mount Size 4.95" W x 4.95" H x 1.9" D
Wall Mount mounting 2-gang electrical box

Standards Utilized:
Full-Duplex Operations IEEE 802.3x
Fast Ethernet, 100Mbps IEEE 802.3u

The 5404CS/5401CS specifically uses 100Base-TX
Data Terminal Equipment Power IEEE 802.3af

via Media Dependent Interface (PoE)

Connecting Cable:
Digital Audio/Power/Control CAT5e or better

For distances to a maximum of 100 Meters (approximately 300 feet)

to the connected switch. Cable installed and tested in accordance with

AN-SI/TIA/EIA 568B Standards.

The 5404CS/5401CD digital microphone station utilizes Dante® technology

licensed from Audinate Pty Ltd. Live audio on the data network is time

sensitive and requires minimal latency through the network to ensure

uninterrupted audio. The 5404CS/5401CS digital microphone station and

Dante operate on Layer 3 (IP Layer) of the OSI Model, but only within

a Local Area Network (LAN) or Virtual Local Area Network (VLAN). This

audio traffic will not operate across a Layer 3 Router or above. The

network should support Quality of Service (QoS) and Prioritization for

best audio performance. All connections to the 5404CS / 5401CS digital

microphone station must be full duplex 100 Mbps Ethernet.

Environmental:
Operating Temperature Range +32°F to +104°F (0°C to +40°C)
Storage Temperature Range –40°F to +158°F (–40°C to +70°C)

Power Consumption < 4 W
Supply Power 48 VDC

NOTE: These units are not compatible with 500, 510 or 520
series Announcement Control Systems (ACS), nor at this time
with the GLOBALCOM® vACS systems.

©2015 Innovative Electronic Designs LLC. All Rights Reserved. IED is a Registered Trademark of Innovative Electronic Designs LLC. All other trademarks are the property
of their respective owners and no endorsement is implied. Due to continual product development, specifications are subject to change without notice.

IED005136 RevA 3/15