Atlas IED I8S+ Data Sheet

I8S+

PoE+ Indoor IP Loudspeaker

1/9

Features

Network Features

• Dynamic or Static IP Address

• IEEE802.3 10/100Base-T Ethernet

• IEEE 802.1q Tagging

• IEEE 802.3AT Compliant

VoIP Standard Audio

• G.711 u-law/a-law (64 kbit/s)

• G.722 Wideband Audio (64 kbit/s)

Auto Provisioning

• DHCP Option 66, 150, or TFTP Server

• DHCP Option 72 for HTTP Server

Auto Registration

• SLP for InformaCast

• DHCP Option 72 for SA-Announce or GCK

Static Configuration

• HTTP GUI for Static Configuration

• Cisco SRST

Audio Features

• Integrated Amplifier

• 15-Watt Tot al Power

• Primary Speaker Output 8Ω

• Aux Audio Line-In Unbalanced (2.8Vpp 10K)

• Aux Audio Line-Out Unbalanced (2.8Vpp 10K)

Additional Features

• 2 General Purpose Inputs

• 1 Relay Output (2A @ 30 VDC)

• Phone/Night Loud Ringer

• External Power Supply Option

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

General Description

AtlasIED I8S+ is an indoor wall / ceiling mount IP loudspeaker. It
leverages VoIP communication to extend tele-presence with enhanced
audio for environments where network-wide communication is desired
and high-output loudspeakers are required to overcome high ambient
noise and/or large spaces.

Applications

AtlasIED I8S+ registers as a communication endpoint directly within
InformaCast, GCK, and SA-Announce advanced notification applications,
supporting audio broadcast to enhance physical security while improving
day-to-day communications through advanced alerting, bell schedules,
pre-recorded & scheduled announcements, while leveraging the WAN or
LAN network architecture.

When used within a Cisco environment, the I8S+ loudspeakers
can join Cisco’s Unified Survivable Remote Site Telephony (SRST)
as a supported device. Cisco’s SRST provides remote location
call-processing redundancy when access to the centralized Cisco
Unified Communications Manager is interrupted because of a WAN
outage.

The ability of LAN communication between any combination of phones
and loudspeakers is particularly critical during an emergency (which may
be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the I8S+
loudspeakers can register as SIP devices directly to a SIP server or
VoIP Communications Manager for critical alerts and public address
applications.

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

System

Type PoE+ Indoor IP Loudspeaker System

Operation Mode Self Powered

Indicators Network Status (On Back)

Operating Range (-10db) 70Hz - 15.5kHz

Frequency Response (+/- 5dB) 86Hz - 15.5kHz

Vertical Coverage 105° 800Hz - 4kHz

Horizontal Coverage 105° 800Hz - 4kHz

Directivity Factor (Q) 4.7 @ 2 kHz

Max SPL at 1 m (passive) 106 dB SPL Continuous / 109 dB SPL Peak

Recommended Signal Processing Built-In Processing

General Purpose Interface Two Trigger Inputs / One Relay Output (2A @ 30 VDC)

Transducers

Transducer Qty and Size 8"

Voice Coil Size 1"

Cone Material Curvelinear, Treated Industrial Paper

Driver Protection Built-In Limiter

Amplication

Type Single-Channel Class D Topology

AC Power Input PoE or PoE+ and External 24VDC

Power Rating (RMS) 15 Watts Max (802.3AT)

THD <.02%

Cooling Passive/Convection

Audio Inputs and Outputs

Input: Analog Audio Type(s) One Unbalanced Analog

Input: Analog Connectivity Secured Screw Terminal Block

Input: Network Audio Type(s) G.711 U-Law/A-Law and G.722 Capable

Input: Network Connectivity RJ-45 Female

Output: Analog Audio Type(s) One Unbalance Line Level

Output: Analog Connectivity Secured Screw Terminal Block

Output: Digital Audio Type(s) N/A

Output: Digital Connectivity N/A

Output: Loudspeaker Level 8Ω, 9W (802.3AF), 15W (802.3AT)

Output: Loudspeaker Connectivity Two x Secured Screw Terminal Block

Software

SA-Announce Compatible Versions 9.0.18+

InformaCast Compatible Version 8.0+

GCK Compatible Version 3.0+

Network

Ethernet IEEE802.3 10/100Base-T

PoE IEEE802.3AF/AT Compliant

VLAN IEEE802.1q Tagging

Protocols

IP Addressing DHCP/Static

Auto-Provisioning HTTP/TFTP

Auto-Registration HTTP/Service Location Protocol/IEDNet

Time NTP

Telephony SIP

2/9

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

Enclosure

C10A Polars (Normalized to Zero on Axis) (-6dB)

C10A Impedance

C10A Frequency Response

Color White (RAL 9010)

Grille Material Powder Coated Steel, White Finish, Paintable

Baffle Material 18-gauge Corrosion-Resistant Zinc Plated Steel

Mounting/Rigging Provisions Mounting Enclosure is Not Included (See Optional Enclosure)

Safety Agency Ratings ETL Listed to Comply with UL-60950-1, and CAN/CSA-C22.2 No. 60950-1

Ingress Protection IP-30

Logo Blue and Removable

Product Dimensions (HxWxD) 11.5" (292mm) x 11.5"" (292mm) x 2.84" (72.14mm)

Shipping Dimensions (HxWxD) 12.37" (314mm) 12.37" (314mm) x 5" (127mm)

Net Weight - lbs 3.6 lbs (1.63kg)

Shipping Weight - lbs 4.8 lbs (2.2kg)

Warranty Coverage

Warranty Period 1 year

NOTES:

1. Sensitivity: Half space pink noise measurement at 6 ft (1.8 m) at 20% power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

3. Frequency response and sensitivity are half-space measurements.

3/9

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

SPL in dB

Frequency (Hz)

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

Ohms

Frequency (Hz) Octave Smoothing = 30.0%

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

Dimensional Drawings

FORCE
DISCOVERY
JUMPERS A,B,C

SERVICE
SWITCH

RJ45 NETWORK

AUX POWER
24VDC @ 1A

IP SPEAKER
CONNECTOR
BLOCK (PIN1)

(-)
(+)

IP SPEAKER CONNECTOR BLOCK

PIN

FUNCTION

1

REMOTE BUTTON / GPI 2 (+)

2

REMOTE BUTTON / GPI 2 (-)

3

REMOTE BUTTON / GPI 1 (+)

4

REMOTE BUTTON / GPI 1 (-)

5

RELAY (-)

6

RELAY - NORMALLY OPEN (+)

7

LINE-IN (-)

8

LINE-IN (+)

9

LINE-OUT (-)

10

LINE-OUT (+)

11

PRIMARY SPEAKER (-)

12

PRIMARY SPEAKER (+)

13

SECONDARY SPEAKER (-)

14

SECONDARY SPEAKER (+)

2.84

FORCE
DISCOVERY
JUMPERS A,B,C

SERVICE
SWITCH

IP SPEAKER
CONNECTOR
BLOCK (PIN1)

.20 .16

.38 X 36°

IP SPEAKER CONNECTOR BLOCK

PIN

FUNCTION

1

REMOTE BUTTON / GPI 2 (+)

2

REMOTE BUTTON / GPI 2 (-)

3

REMOTE BUTTON / GPI 1 (+)

4

REMOTE BUTTON / GPI 1 (-)

5

RELAY (-)

6

RELAY - NORMALLY OPEN (+)

7

LINE-IN (-)

8

LINE-IN (+)

9

LINE-OUT (-)

10

LINE-OUT (+)

11

PRIMARY SPEAKER (-)

12

PRIMARY SPEAKER (+)

13

SECONDARY SPEAKER (-)

14

SECONDARY SPEAKER (+)

4/9

2.84

8" SPEAKER

C10A

IP SPEAKER CONNECTOR BLOCK

PIN

1

REMOTE BUTTON / GPI 2 (+)

2

REMOTE BUTTON / GPI 2 (-)

3

REMOTE BUTTON / GPI 1 (+)

4

REMOTE BUTTON / GPI 1 (-)
5
6

RELAY - NORMALLY OPEN (+)
7
8
9

10
11
12
13
14

LINE-OUT (-)

LINE-OUT (+)

PRIMARY SPEAKER (-)

PRIMARY SPEAKER (+)

SECONDARY SPEAKER (-)

SECONDARY SPEAKER (+)

FUNCTION

RELAY (-)

LINE-IN (-)

LINE-IN (+)

11.50

FORCE
DISCOVERY
JUMPERS A,B,C

SERVICE
SWITCH

IP SPEAKER
CONNECTOR
BLOCK (PIN1)

10.00

.20 .16

.38 X 36°

(-)
(+)

AUX POWER
24VDC @ 1A

RJ45 NETWORK

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

.20 .16

.38 X 36°

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

3.01

11.71

4.98

PKG. WT 5.8 IB

8

7

6

5

4

3

2

1

MODEL

SCALE

ATLAS SOUND

A MITEK COMPANY

1601 JACK McKAY BLVD.

PH:972-875-8413 FAX:[phone]

REV.

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

MITEKCORP. ANY

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

MITEKCORP IS PROHIBITED.

D

C

B

A

3

2

1

E

F

MODEL

SCALE

REV.

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

Optional Accessories

SEA-I8S

5/9

11.75

4X

.250

10.00

.034

9.00

9.00

10.00

4.98

11.71

PKG. WT 5.8 IB

ATLAS SOUND

A MITEK COMPANY

1601 JACK McKAY BLVD.

PH:972-875-8413 FAX:[phone]

3.01

DRAWING IS THE SOLE PROPERTY OF

MITEKCORP. ANY

MITEKCORP IS PROHIBITED.

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

2

1

PKG. WT. 4.6 LB

BILL OF MATERIALS

ITEM

NO.

PART NUMBER

REV QTY

DESCRIPTION

1 114863

F

4

NUT, 8-32 J-NUT SS

2 387042

E

1

ENCL SQ 11.62 X 11.62 X 4

3 490919 1

LABEL, 1X1 MADE IN USA

D

C

B

A

7

6

5

4

3

2

1

E

F

MODEL

SIZE

SCALE

SEST-I8S

1:2

ATLAS SOUND

A MITEK COMPANY

1601 JACK McKAY BLVD.

PH:972-875-8413 FAX:[phone]

REV.

C

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

MITEKCORP. ANY

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

MITEKCORP IS PROHIBITED.

D

C

4

3

2

1

E

F

Optional Accessories

2

1

PKG. WT. 4.6 LB

BILL OF MATERIALS

ITEM

NO.

PART NUMBER

REV QTY

DESCRIPTION

1 114863

F

4

NUT, 8-32 J-NUT SS

2 387042

E

1

ENCL SQ 11.62 X 11.62 X 4

3 490919 1

LABEL, 1X1 MADE IN USA

D

C

B

A

4

3

2

1

E

F

ATLAS SOUND

A MITEK COMPANY

1601 JACK McKAY BLVD.

PH:972-875-8413 FAX:[phone]

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

MITEKCORP. ANY

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

SEST-I8S

6/9

4.00

2

(8X)

11.63

(2X)

.28

10.00

.25

6.00

3.38

8.25

1

PART NUMBER

BILL OF MATERIALS

REV QTY

F

E

ITEM

NO.

1 114863

2 387042

3 490919 1

4

1

DESCRIPTION

NUT, 8-32 J-NUT SS

ENCL SQ 11.62 X 11.62 X 4

LABEL, 1X1 MADE IN USA

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

Optional Accessories

PKG. WT. 5.8 LB

D

C

B

A

8

7

6

5

4

3

2

1

E

F

ATLAS SOUND

A MITEK COMPANY

1601 JACK McKAY BLVD.

PH:972-875-8413 FAX:[phone]

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

MITEKCORP. ANY

REPRODUCTION IN PART OR AS A WHOLE

FEST-I8S

3.78

7/9

17.67

10.67

10.00
.500

9.50

10.67

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

2

2

3

1

10.00

10.00

4.05

12.13

2

3

1

10.00

10.00

BILL OF MATERIALS

ITEM
NO.

PART NUMBER

REV QTY

DESCRIPTION

1 493792

A

1

TILE BRIDGE,I8S-TBE

2 493786

A

1

ENCLOSURE,I8S-TBE

3 113336

A

4

NUT, 8-32 BASKET NUT

3

1

BILL OF MATERIALS

ITEM
NO.

PART NUMBER

REV QTY

DESCRIPTION

1 493792

A

1

TILE BRIDGE,I8S-TBE

2 493786

A

1

ENCLOSURE,I8S-TBE

3 113336

A

4

NUT, 8-32 BASKET NUT

I8S-TB

2

1

2

1

.50

PKG. WT. 2.5 LB

ITEM NO.

QTY

DESCRIPTION

1 1

TIL BRG I8S FORMED

2 4

NUT, 8-32 J-NUT SS

2

1

8/9

I8S-TBE

23.69

10.56

.50

12.50

1

2

ITEM NO.

QTY

1 1

2 4

2

DESCRIPTION

TIL BRG I8S FORMED

NUT, 8-32 J-NUT SS

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

10.00

4.05

12.22

10.00

3

12.13

23.63

ITEM

PART NUMBER

NO.

1 493792

2 493786

3 113336

1

BILL OF MATERIALS

REV QTY

A

1

A

1

A

4

DESCRIPTION

TILE BRIDGE,I8S-TBE

ENCLOSURE,I8S-TBE

NUT, 8-32 BASKET NUT

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

Architect and Engineer Specications

The unit shall be AtlasIED model I8S+. The loudspeaker system shall
include factory assembled loudspeaker, IP addressable PCB amplifier/
control and metal baffle. The loudspeaker shall be an 8" driver with a 10oz
(260g) ceramic magnet and seamless cone. The impedance shall be 8
ohm and a voice coil diameter of 1" (25mm). The loudspeaker dispersion
shall be 105° (800Hz - 4kHz) and frequency response of 86Hz – 15.5kHz
(±5dB). The max peak output at 1W/1m shall be 98dB SPL.

The amplifier/control board shall be capable of producing 15-watts
RMS when using an IEEE 802.3at compatible PoE+ switch or 24VDC
local power supply and 9-watts RMS when used with an IEEE 802.3af
compliant PoE switch. Interconnect shall be via female RJ-45 connector
mounted to the PCB.

All control functionality shall be determined via software. The metal
loudspeaker baffle overall dimensions shall be 11.5" (292mm) x

11.5" (292mm) x 2.84" (72.14mm). Finish shall be neutral white
electrostatic powder coat.

Optional enclosures shall include:

9/9

SEA-I8S surface mount angled enclosure for I8S+

SEST-I8S surface mount straight enclosure for I8S+

FEST-I8S flush mount straight enclosure for I8S+

neutral white finish

neutral white finish

reclaimed powder coat finish

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005304 RevA 2/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com