Atlas IED FS12T-BT60 Data Sheet

(preliminary)

FS12T-BT60

FS Series Arena Horn Loudspeaker

1/7

FS12T-BT60

Features

• Ideal for a Wide Array of Outdoor and Indoor Applications

• Integrated 200-Watt 70.7V Transformer

• Coaxial Design Offers Controlled Coverage of 90° Conical

• All-Weather Construction Ensures Long-Term Reliability Through
Varying Seasons

• Flexible Mounting System Ensures Versatile Install Mounting Angles

• Easy Service Design Allows Transducers to be Serviced in the Field
without Uninstalling the Enclosure from the Mount

• Neutral Finish Blends into Any Environment

Applications

The FS12T-BT60 features a lightweight and compact all-weather
enclosure that can be used in multiple outdoor and indoor installation
applications including arenas, stadiums, fairgrounds, racetracks, theme
parks, outdoor entertainment centers, convention centers, aquatic
centers, and multipurpose venues.

General Description

The FS12T-BT60 is two-way, full-range loudspeaker system engineered
to provide excellent voice and music reproduction in applications
requiring weather resistance. It was designed to withstand exposure to
environmental conditions and provide long-lasting reliability.

It incorporates a 12" LF driver and 1" diameter HF reproducer
concentrically mounted to a high-directivity waveguide. It provides 90°
conical coverage and is tuned for optimal source reproduction.

The unit is constructed using molded linear low-density polyethylene
(LLDPE), creating an incredibly strong yet lightweight enclosure. The
unit includes a stainless steel U-bracket and fly-points allowing for easy
mounting. Input is via an integrated 70.7V transformer with low insertion
loss and full frequency response with power taps up to 200-watts
including an 8Ω bypass. The transformer is discretely mounted under the
rear cover for weather protection. The finish is neutral “battle ship grey”
that is UV resistant and allows for years of durability.

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

(preliminary)

System

Type Full-Range, Outdoor, Direct Radiator Loudspeaker

Operation Mode Non-Powered Passive

Operating Range (-10db) 55Hz-15kHz

Frequency Response (+/- 5dB) 62Hz-14kHz

Nominal Input Sensitivity (1W @1m) 93.5

Vertical Coverage 90°

Horizontal Coverage 90°

Max Input Ratings (8 ohm) 200 W Continuous, 400 W Program

Transformer Taps - 70V 200W, 100W, 50W, 25W

Transformer Taps - 100V 100W, 50W, 25W

Directivity Factor (Q) 8.8 @ 4kHz

Directivity Factor (DI) 9.45 @ 4kHz

Max SPL at 1m (passive) 116.5

Recommended Signal Processing 70 Hz High Pass Filter

Recommended Power Amplification 200W @ 8Ω

Transducers

LF Transducer Qty and Size 1 x 12"

LF Voice Coil Size 2.5"

MF Transducer Qty and Size N/A

MF Voice Coil Size N/A

HF Transducer Qty and Size 1" Silk Dome Tweeter

HF Voice Coil Size 1"

Maximum Output (System) 116.5 dB

Nominal Impedance (System) 8Ω

Minimum Impedance (System) 7. 3 Ω @ 180Hz

Driver Protection System Protection Circuit

Enclosure

Color Light Gray

Enclosure Material LLDPE (Linear Low-Density Polyethylene)

Grille Material Aluminum

Baffle Material Stainless Steel

Mount Material Stainless Steel

Input Connection Barrier Terminal, Transformer/ 8Ω Direct

Controls N/A

Mounting/Rigging Provisions 6mm Stainless Steel U-Bracket

Ingress Protection IP45 When Tilted 5° Downwards

Environmental Testing MIL-DTL-12606

Cutout Diameter N/A

Logo 2 Sides, Rear Cover, and Grill

Product Dimensions (HxWxD) 19.56" x 18.5" x 18.5" (497.84mm x 469.9mm x 496.9mm)

Shipping Dimensions (HxWxD) 24.5" x 23.5" x 23.5" (622.3mm x 596.9mm x 596.9mm)

Net Weight 39 lbs (17.69 kgm)

Shipping Weight 52 lbs (23.59 kgm)

Warranty Coverage

Warranty Period 5 Years

2/7

NOTES:

1. Sensitivity: 1 meter, 2.83 volts RMS.

2. Power: All power figures are calculated using the rated nominal impedance.

3. Frequency response and sensitivity are anechoic measurements.

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

(preliminary)

3/7

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

(preliminary)

4/7

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

(preliminary)

5/7

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com

(preliminary)

D

C

B

6

5

4

3

2

1

E

F

2.5mm
.10in

6

5

4

3

2

1

E

F

Dimensional Drawings

1.18

8

7

6

5

4

3

2

13.04

COVER REMOVED

19.60

18.49

D

1.18

18.50

DETAIL D

SCALE 1 : 2

7

6

5

4

3

2

1

13.04

10.60

9.00 1.18

COVER REMOVED

19.60

17.10

18.49

D

2.50

1.18

18.50

DETAIL D

SCALE 1 : 2

8

7

6

5

4

3

2

PROPRIETARY AND CONFIDENTIAL

THE INFORMATION CONTAINED IN THIS

DRAWING IS THE SOLE PROPERTY OF

REPRODUCTION IN PART OR AS A WHOLE

WITHOUT THE WRITTEN PERMISSION OF

COVER REMOVED

19.60

17.10

18.49

D

DETAIL D

SCALE 1 : 2

D

C

5

4

3

2

1

E

F

2

1

E

F

18.49

D

C

2

1

E

F

2.50

6/7

18.50

19.60

10.60

16.00

4.00

.41

2.50

13.04

9.00 1.18

19.60

17.10

D

Angle Set Strap

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

12 x 10mm

.39in

260mm

10.24in

.79in

20mm20mm

.79in

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

2.5mm
.10in

25mm

.98in

AtlasIED.com

(preliminary)

Architect and Engineer Specications

Loudspeaker shall be Atlas Sound model FS12T-BT60 or approved equal.

The loudspeaker system shall be a two-way, full-range design with an
IP45 rating. It shall include a 12" LF driver and 1" diameter HF reproducer
concentrically mounted. The three pole (18dB/octave) dividing network
shall have a crossover frequency of 1.6kHz. The dividing network
shall include a poly switch protection circuit for the high-frequency
component.

The loudspeaker system shall be capable of providing a sound dispersion
angle of 90° conical in the 2kHz octave band. Rated power shall be 200
watts RMS based on EIA Standard RS-426B.

Enclosure shall be UV-resistant, linear low-density polyethylene (LLDPE)
and shall include a 2-stage multiple mesh filter system for weather and
rodent resistance: to include a 20-gauge perforated aluminum screen on
front mouth assembly, a 100 x 100 weave stainless steel mesh between
HF horn and HF driver and a 100 x 100 weave stainless steel mesh over
12" woofer. The loudspeaker shall include a stamped and formed, 6mm
stainless steel powder coated mounting bracket assembly for surface
mounting.

Sensitivity shall be 93.5dB SPL (80Hz to 15kHz in 1/3 octave bands)
measured at a distance of one meter on axis with a one watt input half
space (2.83V).

Overall frequency response shall be 62Hz – 14kHz. The input section
located on the bottom rear of the loudspeaker shall be via 7 position
screw down terminal strip internally configured to allow input to an
internally mounted 70.7V transformer with 25, 50, 100, 200-watt taps
and a bypass jumper direct coupled to the speaker for nominal 8Ω
operation. The system connections shall be protected from the
elements by a screw affixed weather resistant cover.

7/7

©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.

All specs are subject to change without notice. ATS005234 RevA 6/16

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasIED.com