Page 1
FAP63T-W
FAP Strategy III Series Ceiling Loudspeaker
1/7
FAP63T-W
Features
• 70.7V/100V and 8Ω Operation
• Patented Safety First Mounting System Enables Installation without
Drill or Screwdriver
• Improved Waveguide Provides up to 110° Dispersion
• Ported Enclosure Provides Enhanced Low-Frequency Response
• 4-Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Loudspeakers or Subwoofers
General Description
The FAP63T-W’s 130° dispersion angle can reduce the number of
loudspeakers necessary to achieve coverage in distributed systems with
low ceilings. The loudspeaker component matches the performance
of the legendary Atlas Sound FA136 driver. High quality construction
6.5" coaxial cone type driver includes a 1" voice coil and high efficiency
composite cone with polymer coated cloth surround. The 20mm
coaxially mounted silk dome tweeter. A high sensitivity of 90dB average
means less power may be required to achieve the desired SPL.
This loudspeaker is factory assembled in an optimally tuned and ported
deep drawn enclosure and includes a specially designed 32-watt low
saturation 70.7V / 100V transformer. A convenient front mounted
selector switch allows tap selection without the need to remove the
loudspeaker from the ceiling. This switch also includes a transformer
bypass setting for 8Ω direct coupled operation.
Three years of development has produced the most innovative, easily
installed, and safety-secure ceiling loudspeakers in the professional
audio market. Patented Safety First Mounting System protects from
over-torquing the mounting doglegs during installation and potentially
cracking or breaking the mounting system. The results are NO install
tools required, NO over-torqued doglegs, NO rusted screws and QUICK
installation.
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments Include Transformer Bypass Setting for 8Ω Direct
Coupled Operation
• Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail
Tile Bridge (Included)
• Safety Listed to UL1480 and UL2043
Applications
Atlas Sound’s FAP63T-W combines superior coaxial loudspeaker
performance with even dispersion and easy installation. A low profile
enclosure and wide coverage make the FAP63T-W a perfect choice for
low ceilings.
The FAP63T-W will satisfy the needs of owners, architects, contractors,
and consultants by delivering true, high fidelity sound reproduction
in an attractive and easy-to-install system. The FAP63T-W is ideal for
high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevD 12/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 2
System
Type Two Way, Full Range, Coaxial Ceiling Loudspeaker
Operation Mode Non-Powered Passive
Operating Range (-10dB) 70Hz
Frequency Response (+/- 5dB) 80Hz - 20kHz
Vertical Coverage 100º 800Hz - 4kHz
Horizontal Coverage 100º 800Hz - 4kHz
Max Input Ratings (8Ω) 75W Continuous, 150W Program
Transformer Taps - 70V 32W, 16W, 8W, 4W and Low Impedance (8Ω)
Transformer Taps - 100V 32W, 16W, 8W
Directivity Factor (Q) 7.62 @ 2kHz
Directivity Factor (DI) 8.82 @ 2kHz
Input Sensitivity at 1W/1m 90 dBSPL
Max SPL at 1 m (Passive) 108.5 dB Continuous / 115 dB Peak
Recommended Signal Processing 80Hz
Recommended Power Amplification 200W at 8Ω
Transducers
LF Transducer Qty and Size 1 x 6.5"
LF Voice Coil Size 1"
MF Transducer Qty and Size N/A
MF Voice Coil Size N/A
HF Transducer Qty and Size 1 x 20mm Treated Silk Dome Tweeter
Maximum Output 108.5 dB SPL / 115 dB SPL (Peak 8Ω)
Nominal Impedance 8Ω
Minimum Impedance 7. 1 Ω @ 212Hz
Crossover Frequency 2.5kHz
Driver Protection N/A
Enclosure
Color White (RAL 9016)
Enclosure Material Powder Painted CRS
Grille Material Powder Coated CRS, White Finish (RAL9016), Paintable
Baffle Material UL94V-0 PC
Mount Material Zinc Plated CRS
Input Connection 4-Position PHX Type Connector
Controls Front-Face Power Taps / Low Impedance Selector Switch
Mounting/Rigging Provisions Patented Safety First Mounting System
Safety Features 1 Safety Hang Point
Safety Agency Ratings UL Listed to Comply with UL1480, UL2043 and CSA60065.
Ingress Protection IP-21
Environmental Testing Humidity: MIL-STD-810G / High and Low Temperature: -20° and 70° C
Cutout Diameter 9.18" (233 mm)
Logo White Removable
Product Dimensions (HxWxD) 10.51" (267 mm) x 10.51" (267 mm) x 8.86" (225.1 mm)
Shipping Dimensions (HxWxD) 15.04" (382 mm) x 28" (711 mm) x 12.3" (312 mm)
Net Weight - lbs Unit w/ C-Ring = 7.82 lbs (3.54 kg) 2V-rails = 2.1 lbs (.95 kg)
Shipping Weight - lbs 27.19 lbs (12.33 kg) Shipped in Pairs
Warranty Coverage
Warranty Period 5 Years
NOTES:
1. Sensitivity: Half space, 1 meter, 2.83 volts RMS.
2. Power: All power figures are calculated using the rated nominal impedance.
3. Frequency response and sensitivity are half-space measurements.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevD 12/16
24.5 Volts RMS, 49 Volts Momentary Peak
Suitable for Use in Air Handling Spaces per NFPA 70 and NFPA 90.
2/7
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 3
3/7
10000
20000
90
250 Hz
0
-90
0
-6
-12
-18
-24
90
500 Hz
0
-90
0
-6
-12
-18
-24
90
1000 Hz
0
-90
0
-6
-12
-18
-24
90
2000 Hz
0
-90
0
-6
-12
-18
-24
90
4000 Hz
0
-90
0
-6
-12
-18
-24
90
8000 Hz
0
-90
0
-6
-12
-18
-24
110
105
100
95
90
85
80
75
70
65
60
10
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz) Octave Smoothing = 50.0%
8877 Samples
dB (Pascals)
10000
20000
90
250 Hz
0
-90
0
-6
-12
-18
-24
90
500 Hz
0
-90
0
-6
-12
-18
-24
90
1000 Hz
0
-90
0
-6
-12
-18
-24
90
2000 Hz
0
-90
0
-6
-12
-18
-24
90
4000 Hz
0
-90
0
-6
-12
-18
-24
90
8000 Hz
0
-90
0
-6
-12
-18
-24
90
250 Hz
110
105
100
95
90
dB (Pascals)
85
80
75
70
65
60
10
30
25
20
-24
-18
-12
0
90
-90
-6
0
500 Hz
20
30
0
90
-90
-24
-18
-12
-6
0
40
50
1000 Hz
70
100
Impedance vs. Frequency Response
0
90
-90
-24
-18
-12
-6
0
Frequency Response
200
Frequency (Hz) Octave Smoothing = 50.0%
8192 Samples, Frequency Res = 5.0 Hz
2000 Hz
8877 Samples
300
400
500
-24
-18
-12
700
0
-6
0
1000
-90
90
4000 Hz
2000
-24
-18
-12
0
90
-90
-6
0
3000
4000
8000 Hz
5000
7000
0
-24
-18
-12
-6
0
-90
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
15
OHMS
10
5
0
20
30
40
50
70
100
200
300
400
500
Frequency (Hz)
700
1000
2000
3000
4000
5000
7000
All specs are subject to change without notice. ATS005231 RevD 12/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 4
110
105
100
95
90
85
80
75
70
65
60
10
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz) Octave Smoothing = 50.0%
8877 Samples
dB (Pascals)
10000
20000
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz)
8192 Samples, Frequency Res = 5.0 Hz
OHMS
30
25
20
15
10
5
0
90
250 Hz
0
-90
-6
-12
-18
-24
90
500 Hz
0
-90
-6
-12
-18
-24
90
1000 Hz
0
-90
-6
-12
-18
-24
90
2000 Hz
0
-90
-6
-12
-18
-24
90
4000 Hz
0
-90
-6
-12
-18
-24
90
8000 Hz
0
-90
-6
-12
-18
-24
65
60
10
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz) Octave Smoothing = 50.0%
10000
20000
22000
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz)
Beamwidth (degrees)
360
315
270
225
180
135
90
45
0
6 dB down
20
30
40
50
70
100
200
300
400
500
700
1000
2000
3000
4000
5000
7000
10000
20000
Frequency (Hz)
8192 Samples, Frequency Res = 5.0 Hz
OHMS
30
25
20
15
10
5
0
4/7
360
315
270
225
180
135
Beamwidth (degrees)
90
45
0
100
Beamwidth vs. Frequency Response
200
300
400
500
700
6 dB down
1000
Frequency (Hz)
2000
3000
4000
5000
7000
Directivity Index/Q vs. Frequency
FAP33T PLR SAM 5 072215 1W 2M
20
15
10
5
Directivity Index
0
-5
89
100
50
40
30
Q
20
10
7
5
200
300
400
500
700
1000
Frequency (Hz)
2000
3000
4000
5000
7000
4
3
2
1
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevD 12/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 5
8.23
209.0
8.86
225.1
.62
15.8
10.51
267.0
8.94
227.0
8.23
209.0
8.86
225.1
.62
15.8
15.8
Dimensional Drawings
5/7
10.51
267.0
8.94
227.0
220.3
8.67
.62
8.86
225.1
8.23
209.0
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
22.00
558.70
20.93
531.50
26.09
2.38
60.50
662.58
All specs are subject to change without notice. ATS005231 RevD 12/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 6
Included Accessories
6/7
R5.24
133.0
14.69
373.1
R4.52
114.8
2.99
76.0
Quick Release Tool
Grill Puller
9.13
231.9
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevD 12/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Page 7
Architect and Engineer Specications
7/7
The loudspeaker system shall be Atlas Sound FAP63T-W. System
shall include a high performance 6.5" coaxial loudspeaker, ported bass
reflex enclosure and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 50Hz – 20kHz. Sensitivity
shall be 90dB.
Loudspeaker shall be comprised of a 6.5" cone type driver. Cone shall
be constructed of composite cone with polymer coated cloth surround.
Magnet shall be a minimum of 10 oz (264 g) and the voice coil diameter
shall be 1" (25 mm). The silk dome tweeter is 20mm and utilizes a
Neodymium magnet. Transformer shall be a 70.7V / 100V type with 4, 8,
16, and 32 watt primary taps (@70.7V) with a front mounted tap selector
switch to include transformer bypass setting for 8Ω direct coupled
operation.
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 323in
shall be equipped with an access panel covering a recessed terminal
cup. This cover shall provide a top access compression fitting / strain
relief to facilitate flexible conduit up to 22mm outside diameter or
1" (25mm inside diameter) conduit when the compression fitting is
removed.
External wiring shall be accomplished via a removable lockable wiring
connector with screw-down terminals to provide both secure wire
termination and pre-wiring capability before loudspeaker installation. The
4 pole locking connector shall facilitate in/out connections and shall be
located in the recessed area behind the conduit access panel.
3
. To facilitate connection in conduit systems, enclosure
Seismic support eye shall be provided on top of enclosure for additional
suspension point when used in drop tile ceilings. Construction of
enclosure shall be a minimum of 18-gauge deep drawn painted metal.
Loudspeaker shall include Safety First Mounting System to eliminate
the potential for steel screws to rust and break causing the dogleg to
fail, resulting in the loudspeaker falling out of the ceiling.
The system shall include a support backing plate to reinforce the
ceiling material and tile support rails for use on either 2' x 4' (609mm
x 1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This
assembly can all be installed from beneath the ceiling tile. Overall front
face diameter shall not exceed 10.51" (267 mm); overall depth from the
bottom of the ceiling shall not exceed 8.86" (225.1 mm). Grilles shall
be press-fit, manufactured from 24-gauge perforated steel mesh and
finished in white epoxy. Round grill shall be 8.67" (220mm) diameter.
Loudspeaker shall be safety listed to both UL1480 and UL2043
standards.
The loudspeaker shall be the Atlas Sound FAP63T-W.
©2016 Atlas Sound L.P. and Innovative Electronic Designs, LLC. All Rights Reserved. Atlas Sound is a trademark of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs, LLC. All other trademarks are the property of their respective owners.
All specs are subject to change without notice. ATS005231 RevD 12/16
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Loading...