Atec Ti User Manual

Ti125, Ti110, Ti105
Industrial-Commercial
and the Ti100 General

Use Thermal Imagers

The lightest, most rugged and
easiest–to-use professional
thermal imagers around.

A Fluke thermal imager can save you time and money by finding
potential problems before they become costly failures. With the
innovative features and functionality in the Fluke Ti125, Ti110,
Ti105 and Ti100 imagers, you can perform infrared inspections
faster and more efficiently and thoroughly document problem areas
for additional follow-up.

Ti125

Key features

•Exclusive IR-OptiFlex
in good focus from 1.2 meters (4 feet) and beyond for
optimum image clarity and scanning convenience. For shorter dis­tances change to manual mode with the touch of a finger (Ti110
and Ti125).

•Always have references handy—IR-PhotoNotes
system—Quickly identify and keep track of inspection locations
by adding digital images of important information and
surrounding areas (Ti110 and Ti125).

•Find problems faster and easier with Fluke IR-Fusion
(Ti125, Ti110, Ti105). Accurately identify potential issues
by combining digital and IR images.

•Capture additional measurements fast and conveniently from up
to five wireless modules at once using your Fluke thermal imager
and CNX

•Get further clarification with AutoBlend
of a digital and partially transparent IR image into a single
information-filled image (Ti125 only).

•Multi-mode video recording—focus-free video in visible light
and infrared with full IR-Fusion. (Ti110 and Ti125 only).

•Easily communicate the location of problems with the Electronic
8-Point Cardinal Compass (Ti110 and Ti125 only).

Spend less time finding problems and more time solving them
with the innovative, rugged and easy to use Ti125, Ti110, Ti105
Industrial-Commercial and Ti100 General Use Thermal Imagers.

™

wireless modules.

Ti110

Ti100

Made in

the U.S.A.

of U.S. and

non U.S.

parts

™

Fluke CNX™ enabled

Industrial, mechanical,
electromechanical and general
building maintenance.

Process, refractory insulation, tank
and vessel levels, steam systems
and traps, pipes and valves, etc.

Electrical, unbalanced loads,
overloaded systems, wiring problems
or component failure, etc.

Ti105

Technical Data

™

focus system—ensures that images are

™

annotation

®

technology

™

mode—the blending

Patented Fluke IR-Fusion® Technology

Enjoy the industry’s only point-and-shoot IR-Fusion
camera. Fluke patented technology provides the user
with both a digital and an infrared image in one to
precisely document problem areas.

IR-OptiFlex™ focus system

Scan for issues significantly faster than before
with Fluke’s revolutionary, ultra-rugged focus system.
The IR-OptiFlex focus system gives you optimum
focus by combining focus-free, ease-of-use with
the flexibility of manual focus on the same camera.

Detailed specifications

Ti125 Ti110 Ti105 Ti100

Industrial-Commercial General use

IR resolution (FPA size) 160 x 120 FPA Uncooled Microbolometer
Spectral band 7.5 μm to 14 μm (long wave)
Capture or refresh rate 9 Hz or 30 Hz versions 9 Hz
NETD (Thermal sensitivity) ≤ 0.10 °C at 30 °C target temp (100 mK)
FOV (Field of view) 22.5 °H x 31 °V
IFOV (Spatial resolution) 3.39 mRad
Temperature measurement range

(not calibrated below -10 °C)
Temperature measurement accuracy ± 2 °C or 2 % (at 25 °C nominal, whichever is greater)
Focus mechanism IR-OptiFlex

®

IR-Fusion

CNX

technology

™

Wireless enabled Yes

Color alarms

Standard palettes

™

Ultra Contrast

palettes

Hot/cold markers Yes —
User definable spot markers Three on camera and in SmartView
Centerpoint Yes
Centerbox (MIN/AVG/MAX) Yes —
Level and span control Manual and auto
Minimum span in auto mode 5 °C
Minimum span in manual mode 2.5 °C
Minimum IR focus distance 15.25 cm (6 in) 122 cm (48 in)
Weight 0.726 kg (1.6 lb)
Size 28.4 x 8.6 x 13.5 cm (11.2 x 3.4 x 5.3 in)
LCD display 3.5 inch diagonal (portrait format)
Visible camera 2 megapixel industrial-grade N/A
Minimum parallax ~45.7 – 55.9 cm (~ 18 in – 22 in) ~122 cm (48 in) N/A
IR-PhotoNotes

™ annotation system Yes (3 images) —

Laser pointer Yes
Torch Yes —
Electronic (cardinal) compass Yes —
Emissivity correction Yes
Transmission correction Yes —
Background (reflected) compensation Yes
Voice annotation (audio) Yes (60 seconds) per image —

Multi-mode video output

Multi-mode video recording
(standard avi w/ mpeg encoding)

Multi-mode video recording
(radiometric .is3)

Memory review thumbnail review
Battery (field-replaceable,

rechargeable)
Battery life 4+ hours (each)*
External battery charging base Yes Optional (accessory)
Charging power supply Yes

*Assumes 50 % brightness of LCD

-20 °C to +350 °C
(-4 °F to +662 °F)

™ focus system Focus-free 1.2 m (4 ft) and beyond

PIP, FULL IR, FULL VISIBLE,

AutoBlend

™

High temperature,

low temperature, isotherm

PIP, FULL IR, FULL VISIBLE

High temperature —

Blue-Red, Grayscale, Inverted Grayscale, High-contrast, Hot

Metal, Ironbow, Amber, Inverted Amber

-20 °C to +250 °C (-4 °F to +482 °F)

PIP (1.2 m (4 ft) to 4.6 m

(15 ft)), FULL IR, FULL VISIBLE

Blue-Red, Ironbow, Grayscale, Amber

Blue-Red, Grayscale, Inverted

Grayscale, High-contrast,

Hot Metal, Ironbow, Amber,

Blue-Red, Grayscale, Ironbow —

Inverted Amber

®

Streaming USB video

output (infrared, visible and

—

IR-Fusion modes)

Yes (AVI with MPEG encoding, up to 5 minutes) —

Yes, radiometric .is3 for

approx. 2.5 to 5 minutes de-

—

pending upon thermal scene

Two One

No, full IR only

in SmartView® only

2 Fluke Corporation Ti125, Ti110, Ti105 Industrial/Electrical and Ti100 General Use Thermal Imagers

Ti125 Ti110 Ti105 Ti100

Industrial-Commercial General use

Drop test 2 meter (6.5 feet)
Ingress protection (IP) rating

(IEC 60529)
Recommended Calibration cycle Two-years
Multifunction card reader Included —
Memory storage 2 GB SD memory card
Direct download capability mini USB download direct to PC
Operating temperature range -10 °C to +50 °C (14 °F to 122 °F)
Storage temperature range -20 °C to +50 °C (-4 °F to 122 °F)
Operating humidity Operating and storage 10 % to 95 %, Non-condensing
Vibration and shock 2G, IEC 68-2-26 and 25G, IEC 68-2-29
Safety standards CSA (US and CAN): C22.2 No. 61010-1-04, UL: UL STD 61010-1 (2nd Edition), ISA: 82.02.01
C Tick IEC/EN 61326-1
EMI, RFI, EMC EN61326-1; FCC Part 5

User manuals

Standard warranty period Two-years
Extended warranty and service plans Yes

Czech, English, Finnish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian,

Simplified Chinese, Spanish, Swedish, Traditional Chinese, Turkish, Dutch, and Hungarian

IP 54

Ordering information

FLK-Ti125 30HZ Industrial-Commercial Thermal Imager
FLK-Ti125 9HZ Industrial-Commercial Thermal Imager
FLK-Ti110 30HZ Industrial-Commercial Thermal Imager
FLK-Ti110 9HZ Industrial-Commercial Thermal Imager
FLK-Ti105 30Hz Industrial-Commercial Thermal Imager
FLK-Ti105 9HZ Industrial-Commercial Thermal Imager
FLK-Ti100 9HZ General Use Thermal Imager

Included with product

Thermal imagers are shipped with ac power adapter, lithium
ion smart battery (Ti125 includes 2 each—other models 1 each),
USB cable, SD memory card, hard carrying case, soft transport
bag, adjustable hand strap (left- or right-handed use), printed
users manual in English, Spanish, French, German and Simplified

®

Chinese, others on CD, SmartView

software and warranty
registration card. Ti125 model also include a two-bay charging
base and a multi-format USB memory card reader.

Optional

FLK-TI-VISOR2 Sun visor
FLK-TI-TRIPOD2 Tripod mounting accessory
BOOK-ITP Introduction to Thermography Principles Book
FLK-TI-SBC3 External charging base and power supply
FLK-TI-SBP3 Extra lithium-ion rechargeable smart battery
TI-CAR CHARGER Thermal imager vehicle charger

Not available in all countries.

™

For more information on CNX
and other CNX

™

solutions go to www.fluke.com/cnx

™

wireless thermal imagers

CNX wireless modules

FLK-CNX i3000 iFlex

™ AC Current Clamp Module

FLK-CNX a3000 AC Current Clamp Module
FLK-CNX v3000 AC Voltage Module
FLK-CNX t3000 K-Type Temperature Module

Fluke Corporation

PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.

PO Box 1186, 5602 BD
Eindhoven, The Netherlands

For more information call:
In the U.S.A. [phone] or
Fax [phone]
In Europe/M-East/Africa [phone] or
Fax [phone]
In Canada (800)-36-FLUKE or
Fax [phone]
From other countries [phone] or
Fax [phone]
Web access: http://www.fluke.com

©2012-2013 Fluke Corporation. Specifications subject to
change without notice. Printed in U.S.A. 3/2013 4026524D_EN

Modification of this document is not permitted without
written permission from Fluke Corporation.

3 Fluke Corporation Ti125, Ti110, Ti105 Industrial/Electrical and Ti100 General Use Thermal Imagers