THS730A.
Features
Handheld Battery Operated
Oscilloscope/DMM/Power
Analyzers
TekScope® THS730A * THS720A *
THS720P
CHARACTERISTICS
Oscilloscope Functions
THS730A THS720A THS720P
Bandwidth 200 MHz 100 MHz 100 MHz
Sample Rate (Each
Channel)
Time/Division Range 2 ns to 50
Power Measurements N N Y
Oscilloscope Functions
Channels - Two.
Sensitivity - 5 mV to 50 V/div (to 500 V/div with
10X probe).
Position Range - ±10 div.
DC Gain Accuracy - ±2%.
Vertical Resolution - 8-Bits.
Record Length - 2500 points.
Time/Division Range (THS720P only) - 5 ns to
50 s/div.
Horizontal Accuracy - ±200 ppm.
Roll Mode - > 0.5 s/div.
Autorange - User-selectable.
Trigger Modes - Auto, Normal.
Trigger Types - Edge, Pulse, Video, External, Motor
(THS720P).
Video Trigger Formats and Field Rates - Odd field,
even field and line.
Motor Trigger (THS720P only) - Triggers on 3- and
5-level pulse-width modulated power signal.
External Trigger Input - 5 MHz TTL compatible.
Harmonics (THS720P only) - Up to 31st (30 Hz-
450 Hz).
Waveform Processing - Add, Subtract, Multiply,
Calculate Watts = V x I.
Waveform Storage - 10 waveforms.
1 GS/s 500 MS/s 500 MS/s
s/div
5 ns to
50s/div
5 ns to
50s/div
Acquisition Modes - Sample, Envelope, Average,
Peak Detect.
Cursor Measurements - delta Volts, delta Time,
1/deltaTime (Hz), Degree (phase).
Cursor Types - Horizontal Bars, Vertical Bars, Paired
(volts @ time).
Display System - Interpolation: Sin(x)/x.
Format: YT and XY.
Mode: Vector, Dot, Vector Accumulate, Dot
Accumulate.
Automatic Measurements
Period Frequency
+Width -Width
Rise time Fall time
+Duty cycle -Duty cycle
+Overshoot -Overshoot
High Max
Low Min
Peak-to-Peak Amplitude
Mean RMS
Cycle mean Cycle RMS
Burst width
Power Measurements (THS720P Only) -
W True power
VA Apparent power
VAR Reactive power
V Volts (RMS, Peak)
A Amps (RMS, Peak)
THD-F Total harmonic distortion as a percentage of the
THDR
PF Power factor
DPF Displacement power factor
PHI Phase difference between the voltage and current
Total harmonic distortion of the RMS of the input
fundamental
signal
DMM Specifications
DC Voltage Ranges - 400.0 mV to 880 V.
DC Volts Accuracy - ±(0.5% of reading + 5 counts).
True RMS AC Voltage Ranges - 400.0 mV to 640 V.
Maximum Float Voltage - 600 VRMS CAT II, each
channel (probe dependent).
Resolution - 4000 count, 3-3/4 digits.
AC Volts Accuracy - ±(2% of reading + 5 counts).
Resistance Ranges - 400.0 Ohm to 40.00 megaohm.
Resistance Accuracy - ±(0.5% of reading +
2 counts); 40 megaohm: ±(2% of reading + 5 counts).
Diode Test Range - 0 to 2 V.
Continuity Check - Audible tone when < 50 Ohm.
Modes - Min, Max, Delta, Max-Min, Avg, Hold.
Nonvolatile Storage - 10 DMM screenshots.
External Trigger Input - 5 MHz TTL compatible.
Vertical Zoom Capability - 2X, 5X, 10X.
dB Scale - Selectable, referenced from 1 mV to 10 V.
dBm Scale - Selectable, referenced from 50 Ohm to
600 Ohm.
General Specifications
Setups - 10 front-panel setups.
Safety - UL3111-1, CSA1010.1, EN61010-1,
IEC61010.1.
EMC - Meets Directive 89/336/EEC.
Power - NiCd rechargeable battery pack with AC
adapter (both included).
Battery Life - Approx. 2 hours from full charge.
Display - Backlit LCD.
Display Resolution - 320 x 240.
Physical Characteristics
Dimensions mm in.
Width 177 6.95
Height 217 8.53
Depth 51 2
Weight kg lbs.
Net 1.45 3.2
Top of Page
Features
Specs
Tektronix Measurement products are
manufactured in ISO registered facilities.
Loading...