Atec FIT User Manual
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
Essential Tools for
Fiber Handling
FIT-S105-PRO
FIT-S115-PRO
Inspecting and Testing Fiber Is Now Easier and Faster Than Ever
As fiber penetrates further into next-generation networks, proactively inspecting and cleaning each
connection point is no longer optional, but critical. Using only an optical power meter when testing fiber is an
outdated and high-risk practice. Today’s fiber technician needs a tool kit that provides a seamless workflow for
inspecting, cleaning, testing and troubleshooting a fiber link. Replacing standalone tools with an integrated
test system dramatically improves throughput and productivity. When that test system is designed to
promote an Inspect Before You Connect workflow, it controls technicians’ behavior and drives them to follow
best practices to produce a better performing fiber network. JDSU combines these essential fiber handling
tools into a fast, portable, and easy-to-use system for any fiber technician.
FINISH THE JOB IN LESS THAN HALF THE TIME! (average time to inspect, clean, and test 1 port)
STEPS
INSPECT test lead
1
CLEAN and RE-INSPECT
2
test lead
INSPECT bulkhead port
3
CLEAN and RE-INSPECT
4
bulkhead port
TEST and LOG results
5
MOVE to next port
6
New Process 55 seconds
6
5
4
3
1
:03
:15
:15
:072:05
:10
in seconds
Legacy Process 128 seconds
6
1
:20
2
:20
3
:25
in seconds
4
:30
5
:18
:15
Keep everything together
– Fiber inspection
– Cleaning
– Power measurement
– Fault detection
Free your hands for other tasks
– Logging data
– Accessing equipment
– Routing cable
Stop fumbling with multiple tools
– These essential tools are now integrated
together in a single system
Drive behavior for best practices
– Test the same way every time
– Proactively inspect
– Inspect both sides
– Use clean test leads
– Document data
www.jdsu.com/inspect
Essential Tools for Fiber Handling
Inspect, clean, and test fiber optic connectivity with a seamless
and integrated workflow system
Optical Power Meter with
Inspection Tips
and Adapters
Patch Cord Viewer
Fiber Inspection Probe
Visual Fault Locator
Locate damage and troubleshoot
fiber
CLEAN: Patch cord and bulkhead
INSPECT: Dedicated patch cord
inspection
TEST: Power measurement
Cleaning Materials
Kit Contents
• Optical Power Meter with Patch
Cord Viewer
– Handheld video fiber inspection and
test system with integrated power
meter and patch cord microscope
– Available in standard (FIT-HP3-60-P4)
and High-Power (FIT-HP3-80-P4)
versions.
– Universal patch cord inspection
adatpers for 2.5 mm (FMAE-U25) and
1.25 mm (FMAE-U12) connectors
– Universal power meter test adapters
for 2.5 mm and 1.25 mm (FITP-UPP12)
connectors
• Fiber Inspection Probe
– Dual-magnification (200/400X) probe
microscope (FBP-P5)
– Inspection tips for SC (FBPT-SC) and
LC (FBPT-LC) bulkheads
• Visual Fault Locator
– Pocket-sized visual fault locator used
to quickly locate bends, breaks, and
damages in fiber (FFL-050)
– Universal VFL adapters for
2.5 mm and 1.25 mm (FFL-050-U12)
connectors
NOR TH AM ERICA
TEL : 1 866 22 8 376 2
FAX: 1 301 35 3 921 6
LATIN AMER ICA
TEL : +1 954 6 88 56 60
FAX: +1 954 3 45 46 68
INSPECT: Bulkhead inspection
with probe
Neck strap for hands-free operation
Conveniently store tips and
adapters
Fiber Utility Boot organizes all
components together
ASI A PACIF IC
TEL : +8 52 289 2 099 0
FAX: +8 52 289 2 077 0
EME A
TEL : +4 9 7121 86 2 222
FAX: +4 9 7181 86 1 222
• Fiber Utility Boot
– All-in-one portable organizer for
essential fiber tools with neck strap
for hands-free operation (FITP-UB1)
• Cleaning Materials
– Universal 2.5 mm (FCB-IBC25 ) and
1.25 mm (FCB-IBC-12) bulkhead and
patch cord cleaning tools
– Cleaning solvent and wipes
• Carrying Case
– Stores all contents in protective and
portable shoulder case
www.jdsu.com/inspect
Loading...