ASUS Z01QD User Manual
E14163
First Edition / June 2018
First Edition/ June 2018
ASUS Phone (Mobile Phone)
Model: ASUS_Z01QD (ZS600KL)
Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.
NOTE: For the complete E-Manual and more detailed information, refer to https://www.asus.com/support/.
Front features
LED indicator |
|
|
|
Receiver & Speaker |
Front camera
Proximity sensor and light sensor
Touch screen display
Speaker
Side & Rear features
|
Microphone |
|
|
|
|
|
|
|
|
|
Nano SIM |
|
Rear cameras |
|
Camera flash |
card tray |
|
Microphone |
|
eject hole |
|||
|
|
|
|
|
|
Air Trigger |
|
|
|
Fingerprint |
|
|
|
|
sensor |
|
|
touch sensor |
|
|
|
|
|
NFC |
|
|
|
Nano SIM |
|
detection |
|
|
|
card slot |
|
area |
|
|
|
|
|
Volume key |
|
|
|
|
|
Power key |
|
|
|
Side Mount |
|
|
|
|
|
connector |
|
Air Trigger |
|
|
|
|
|
touch sensor |
|
|
|
|
|
|
|
|
|
Air Trigger |
|
|
Rear cover |
Aura light |
touch sensor |
||
Microphone |
|
|
|
|
|
|
USB Type-C port |
Audio jack |
|
||
NOTES:
•The USB Type-C port supports USB 2.0 transfer rate. The Side Mount connector Type-C port supports USB 3.1 Gen1 transfer rate.
•Go to Settings > Advanced > AirTriggers to set AirTriggers.
AeroActive Cooler features
Use the AeroActive Cooler to keep your ROG Phone working at a high frequency during heavy workloads by providing a better thermal solution, and offering the ultimate user experience.
Fan
USB Type-C port
Aura |
Audio jack |
light |
|
NOTE: Connect your AeroActive Cooler to the Side Mount connector of your ROG Phone.
To install AeroActive Cooler:
1.Place your smartphone in a horizontal position.
2.Place the AeroActive Cooler on the back side of the Phone with the ROG logo outward.
3.Insert the USB plug of the AeroActive Cooler into the Side Mount connector of the Phone.
4.Push top part of the AeroActive Cooler to the Phone and snap the clip on the top side.
NOTES:
•It is not recommended that you connect other devices to your ROG Phone when you install the phone on the AeroActive Cooler.
•Docking your ROG Phone on an accessory with fan(s) will impact the audio quality when making phone calls and recording.
Charging your ROG Phone
To charge your ROG Phone:
1.Connect the USB connector into the power adapter’s USB port.
2.Connect the other end of the USB Type-C cable to your ROG Phone.
3.Plug the power adapter into a wall socket.
3 |
2 |
|
1 |
or
3
1
or
3
1
USB Type-C port
2
* DO NOT insert a USB Type-C cable to this port.
2
NOTES:
•We recommend that you charge your ROG phone through one USB Type-C port at a time.
•Only the Side Mount connector has Display Port functionality.
•If you connect USB Type-C OTG or charging devices to both of the USB Type-C ports on your ROG phone, the Side Mount connector will become the master and the charging current or OTG device on the bottom port will be limited.
IMPORTANT!
•When using your ROG Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.
•When charging your ROG Phone through your computer, ensure that you plug the USB Type-C cable to your computer’s USB port.
•DO NOT charge your ROG phone under water or when the
USB connector is wet.
•Avoid charging your ROG Phone in an environment with ambient temperature of above 35 °C (95 °F).
NOTES:
•For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.
•For safety purposes, use ONLY the bundled power adapter and cable to charge your ROG Phone.
•The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the USB Type-C cable is +5V-10V
3A, 30W.
Installing a Nano SIM card
To install a Nano SIM card:
1.Push a pin into the hole on the Nano SIM card tray to eject it. Insert the Nano SIM card(s) into the card slot(s).
Nano-
NanoSIM1
SIM2
2.Push the tray to close it.
NOTES:
•Both Nano SIM card slots support GSM/GPRS/ EDGE,
WCDMA/HSPA+/DC-HSPA+, FDD-LTE, and TD-LTE DSDV network bands. Both Nano SIM cards can connect to VoLTE 4G calling service. But only one can connect to FDD-LTE, and TD-LTE data service at a time.
•Contact your telecom carrier if DSDV support is available in your area.
CAUTION!
•Do not use sharp tools or solvent on your device to avoid scratches on it.
•Use only a standard Nano SIM card on your ROG Phone.
Loading...