ASUS Z01KD User Manual

User Guide

E13419 15060-96420100

E13419_ZE554KL_UM_Booklet_EU_V2.indd 1

2017-08-23 11:40:04

ASUS Phone (Mobile Phone)

Second Edition / August 2017 Model: ASUS_Z01KD (ZE554KL)

ASUS_Z01KDA (ZE554KL)

ASUS_Z01KS(ZE554KL)

Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.

NOTE: For the latest updates and more detailed information, please visit www.asus.com.

Front features

Proximity sensor and light sensor

Front

camera Receiver

LED indicator

NFC detection area

Touch screen display

Touch keys

Fingerprint sensor

E13419_ZE554KL_UM_Booklet_EU_V2.indd 2

2017-08-23 11:40:04

Side features

Microphone

Nano SIM /	Volume Key
MicroSD combo
card slot
	Power Key

Audio jack Microphone

Speaker

USB Type-C port

NOTE: The USB Type-C port supports USB2.0 transfer rate.

E13419_ZE554KL_UM_Booklet_EU_V2.indd 3

2017-08-23 11:40:05

Rear features

Rear cameras

Camera flash

Rear cover

E13419_ZE554KL_UM_Booklet_EU_V2.indd 4

2017-08-23 11:40:06

Charging your ASUS Phone

To charge your ASUS Phone:

1.Connect the USB connector into the power adapter’s USB port.

2.Connect the other end of the USB Type C cable to your ASUS Phone.

3.Plug the power adapter into a wall socket.

IMPORTANT!

•When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.

•When charging your ASUS Phone through your computer, ensure that you plug the USB Type C cable to your computer’s USB port.

•Avoid charging your ASUS Phone in an environment with ambient temperature of above 35 °C (95 °F).

NOTES:

•For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.

•For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone.

•The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the Type C cable is +5V2A, 10W or +9V2A, 18W.

E13419_ZE554KL_UM_Booklet_EU_V2.indd 5

2017-08-23 11:40:06

Installing a Nano SIM /MicroSD card

To install a Nano SIM / MicroSD card:

1.Push a pin into the hole on the Nano SIM / MicroSD card slot to eject the tray out. Insert the Nano SIM or MicroSD card(s) into the card slots.

	Nano-	Nano-
Micro	SIM1	SIM1
Micro	SD	Nano-
	SD	SIM2

IMPORTANT: You can only use the Nano SIM 2 card or the MicroSD card at a time.

IMPORTANT: When two SIM cards are inserted, only one SIM card slot supports 4G/3G/2G service. The other SIM card slot only supports 2G/3G service.

2.Push the tray to close it.

E13419_ZE554KL_UM_Booklet_EU_V2.indd 6

2017-08-23 11:40:07

NOTES:

•The Nano SIM card slots support LTE,

WCDMA and GSM/EDGE network bands.

•The MicroSD card slot supports MicroSD and

MicroSDHC card formats.

CAUTION!

•Do not use sharp tools or solvent on your device to avoid scratches on it.

•Use only a standard Nano SIM card on your

ASUS Phone. A trimmed SIM card may not properly fit into and may not be detected by your ASUS Phone.

Using NFC

NOTE: NFC is only available in selected regions/ countries.

You can use NFC in the following three scenarios:

Reader mode: Your phone reads information from a contactless card, NFC tag, or other NFC devices.

Place the NFC area of your phone on the contactless card, NFC tag, or NFC device.

E13419_ZE554KL_UM_Booklet_EU_V2.indd 7

2017-08-23 11:40:07

Card Emulation mode: Your phone can be used like a contactless card.

Place the NFC area of your phone on the NFC area of the NFC reader.

Peer-to-Peer mode: Transfers photos, contacts, or other data between your phone and an NFCenabled smartphone.

Bring the NFC areas of both smartphones together, without any space between them.

E13419_ZE554KL_UM_Booklet_EU_V2.indd 8

2017-08-23 11:40:08

Federal Communication Commission Interference Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

•Any Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

•The antenna(s) used for this transmitter must

E13419_ZE554KL_UM_Booklet_EU_V2.indd 9

2017-08-23 11:40:08

+ 18 hidden pages