How it Works
Asus
Loading...
V1S
User Manual
97 pgs10.86 Mb0
Service Manual
23 pgs2.34 Mb0
QUICK START GUIDE [el]
96 pgs8.15 Mb0
User Manual [ru]
96 pgs8.01 Mb0
QUICK START GUIDE [nl]
96 pgs8.03 Mb0
Table of contents
Loading...

Asus V1S User Manual

Notebook PC
Hardware User’s Manual
E3102 / Apr 2007
Contents

Table of Contents

Table of Contents
1. Introducing the Notebook PC
About This User’s Manual ������������������������������������������������������������������������������������������6
Preparing your Notebook PC�������������������������������������������������������������������������������������� 9
2. Knowing the Parts
Top Side��������������������������������������������������������������������������������������������������������������������12 Bottom Side ��������������������������������������������������������������������������������������������������������������14 Right Side �����������������������������������������������������������������������������������������������������������������16 Left Side �������������������������������������������������������������������������������������������������������������������18 Front Side �����������������������������������������������������������������������������������������������������������������20 Rear Side������������������������������������������������������������������������������������������������������������������21 Power Station (optional) ������������������������������������������������������������������������������������������� 22
3. Getting Started
Power System ����������������������������������������������������������������������������������������������������������30
Special Keyboard Functions �������������������������������������������������������������������������������������36
2
Contents
Table of Contents (Cont.)
Switches and Status Indicators ��������������������������������������������������������������������������������39
4. Using the Notebook PC
Pointing Device���������������������������������������������������������������������������������������������������������44
Storage Devices �������������������������������������������������������������������������������������������������������47
Connections��������������������������������������������������������������������������������������������������������������53
3G Watcher Software ����������������������������������������������������������������������������������������������� 61
Appendix
Optional Accessories Optional Connections Operating System and Software Glossary Declarations and Safety Statements Notebook PC Information
3
Contents
4

1. Introducing the Notebook PC

About This User’s Manual Notes For This Manual Safety Precautions Preparing your Notebook PC
NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
5
1 Introducing the Notebook PC

About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides informa­tion on the various components in the Notebook PC and how to use them. The following are major sections of this User’s Manuals:
1. Introducing the Notebook PC
Introduces you to the Notebook PC and this User’s Manual.
2. Knowing the Parts Gives you information on the Notebook PC’s components.
3. Getting Started
Gives you information on getting started with the Notebook PC.
4. Using the Notebook PC Gives you information on using the Notebook PC’s components.
5. Appendix Introduces you to optional accessories and gives additional information.

Notes For This Manual

A few notes and warnings in bold are used throughout this guide that you should be aware of in order to complete certain tasks safely and completely. These notes have different degrees of importance as described below:
NOTE: Tips and information for special situations.
TIP: Tips and useful information for completing tasks.
IMPORTANT! Vital information that must be followed to prevent damage to data, com­ponents, or persons.
WARNING! Important information that must be followed for safe operation.
< >
Text enclosed in < > or [ ] represents a key on the keyboard; do not actually type the < > or [ ] and the enclosed letters.
[ ]
6
Introducing the Notebook PC 1
Safety Precautions
The following safety precautions will increase the life of the Notebook PC. Follow all precautions and
instructions. Except as described in this manual, refer all servicing to qualied personnel. Do not use damaged power cords, accessories, or other peripherals. Do not use strong solvents such as thinners,
benzene, or other chemicals on or near the surface.
IMPORTANT! Disconnect the AC power and remove the battery pack(s) before clean­ing. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.
DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
DO NOT press or touch the display
panel. Do not place together with
small items that may scratch or enter the Notebook PC.
DO NOT expose to dirty or dusty en­vironments. DO NOT operate during a gas leak.
DO NOT leave the Notebook PC on your lap or any part of the body in order to prevent discomfort or injury from heat exposure.
SAFE TEMP: This Notebook PC should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F)
DO NOT throw the Notebook PC in municipal waste. Check local regulations for disposal of electronic products.
DO NOT place or drop objects on top and do not shove any foreign objects into the Notebook PC.
DO NOT expose to strong magnetic
or electrical elds.
DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during an electrical storm.
Battery safety warning: DO NOT throw the battery in re. DO NOT short circuit the contacts. DO NOT disassemble the battery.
INPUT RATING: Refer to the rating
label on the bottom of the Notebook PC and be sure that your power adapter complies with the rating.
DO NOT carry or cover a Notebook PC that is powered ON with any ma­terials that will reduce air circulation such as a carrying bag.
Models with 3G
(1)
: Produces radio wave emissions that may cause electrical interferences
and must be used in places that do not prohibit such devices. Take precautions while using.
WARNING! The 3G function needs to be switched OFF in areas with potentially explosive atmo­spheres such as petrol (gas) stations, chemical storage depots, and blasting operations.
(1)
(See end of Section 4 for denition)
7
1 Introducing the Notebook PC
Transportation Precautions
To prepare the Notebook PC for transport, you should turn it OFF and disconnect all external peripher­als to prevent damage to the connectors. The hard disk drive’s head retracts when the power is turned
OFF to prevent scratching of the hard disk surface during transport. Therefore, you should not transport the Notebook PC while the power is still ON. Close the display panel and check that it is latched securely in the closed position to protect the keyboard and display panel.
CAUTION: The Notebook PC’s surface is easily dulled if not properly cared for. Be careful not to rub or scrape the Notebook PC surfaces.
Cover Your Notebook PC
Purchase a carrying bag to protect the Notebook PC from dirt, water, shock, and scratches.
Charge Your Batteries
If you intend to use battery power, be sure to fully charge your battery pack and any optional battery packs before going on long trips. Remember that the power adapter charges the battery pack as long as it is plugged into the computer and an AC power source. Be aware that it takes much longer to charge the battery pack when the Notebook PC is in use.
Airplane Precautions
Contact your airline if you want to use the Notebook PC on the airplane. Most airlines will have restric­tions for using electronic devices. Most airlines will allow electronic use only between and not during takeoffs and landings.
CAUTION! There are three main types of airport security devices: X-ray machines (used on items placed on conveyor belts), magnetic detectors (used on people walking through security checks), and magnetic wands (hand-held devices used on people or individual items). You can send your Notebook PC and diskettes through airport X-ray machines. However, it is recommended that you do not send your Notebook PC or diskettes through airport magnetic detectors or expose them to magnetic wands.
8
Introducing the Notebook PC 1
1
2
3

Preparing your Notebook PC

These are only quick instructions for using your Notebook PC. Read the later pages for detailed informa­tion on using your Notebook PC.
1. Install the battery pack
2. Connect the AC Power Adapter
3. Open the Display Panel 4. Turn ON the Notebook PC
IMPORTANT! When opening, do not force the display panel down to the table or else the hinges may break! Never lift the Note­book PC by the display panel!
The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hiber­nation modes. Actual behavior of the power switch can be customized in Windows Control Panel > Power Options > System Settings.
9
1 Introducing the Notebook PC
10

2. Knowing the Parts

Basic sides of the Notebook PC
NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
11
2 Knowing the Parts
4
6
5
7
8
6
10
11
3
9
2
1
1

Top Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
NOTE: The keyboard will be different for each territory.
Camera Indicator
The camera indicator shows when the built-in camera is in use. The camera may be auto-activated by supported software.
12
Knowing the Parts 2
11
2
3
4
5
6
7
8
9
10
Fr
on
t
Back
Multi-Position Camera
The built-in camera allows picture taking or video recording. Can be used with video conferencing and other interactive applications.
CAUTION: The lens can be adjusted facing forward or facing back-
ward but the lens can only ip through the bottom. Do not rotate the lens upward past 35 degrees.
Microphone (Built-in)
The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.
Display Panel
The display panel functions the same as a desktop monitor. The Notebook PC uses an
active matrix TFT LCD, which provides excellent viewing like that of desktop monitors. Unlike desktop monitors, the LCD panel does not produce any radiation or ickering, so it
is easier on the eyes. Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.
Instant Keys
Instant keys allow you to launch frequently used applications with one push of a button. Details are described in section 3.
Audio Speaker System
The built-in stereo speaker system allows you to hear audio without additional attachments. The multimedia sound system features an integrated digital audio controller that produces rich, vibrant sound (results improved with external stereo headphones or speakers). Audio features are software controlled.
Keyboard
The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided to help ease navigation in the Windows operating system.
Touchpad and Buttons
The touchpad with its buttons is a pointing device that provides the same functions as a desk­top mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy Windows or web navigation.
Fingerprint Scanner (on selected models)
The ngerprint scanner allows use of security software using your ngerprint as your iden­tication key.
Status Indicators (front)
Status indicators represent various hardware/software conditions. See indicator details in section 3.
Status Indicators (top)
Status indicators represent various hardware/software conditions. See indicator details in section 3.
13
2 Knowing the Parts
CD/DVD
5
4
7 6
8
9
3
1
2
10

Bottom Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
NOTE: The bottom side may vary in appearance depending on model.
NOTE: The battery pack size will vary depending on model.
WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High tempera­tures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO AVOID INJURY FROM THE HEAT.
14
Knowing the Parts 2
2
3
4
1
8
6
7
5
10
9
Battery Lock - Spring
The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.
Battery Pack (see Rear Side for description)
Battery Lock - Manual
The manual battery lock is used to keep the battery pack secured. Move the manual lock to the unlocked position to insert or remove the battery pack. Move the manual lock to the locked posi­tion after inserting the battery pack.
Hard Disk Drive Compartment
The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.
CD/DVD
Module Device
The Notebook PC has an user-swappable module device. Visit an authorized dealer for a selection of module devices for this Notebook PC.
Module Lock
The Notebook PC has a user replaceable module. Visit an authorized dealer for com­patible modules for this Notebook PC.
Memory (RAM) Compartment
The memory compartment provides expansion capabilities for additional memory. Additional memory will increase application performance by decreasing hard disk access. The BIOS au-
tomatically detects the amount of memory in the system and congures accordingly. There is
no hardware or software (including BIOS) setup required after the memory is installed. Visit an authorized service center or retailer for information on memory upgrades for your Notebook PC. Only purchase ex­pansion modules from authorized retailers of this Notebook PC to ensure maximum compatibility and reliability.
Shutdown Button (Emergency)
In case your operating system cannot properly turn OFF or restart, the shutdown button can be pressed with a straightened paper clip to shutdown the Notebook PC.
Power Station Connector
The power station connector allows the Notebook PC to interface with the optional power station.
SIM Card Compartment (on selected models)
The SIM card compartment allows insertion of a mobile SIM card for 3G functions.
15
2 Knowing the Parts
1
5
3
4
2
1 2 3
6 874 5
9 10
E-SATA/
2.0

Right Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
Flash Memory Slot
Normally an external memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC has a built-in high-speed memory card reader that can conveniently
read from and write to many ash memory cards as mentioned later in this manual.
ExpressCard Slot
One 26pin Express card slot is available to support one ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)
E-SATA
E-SATA & USB (2.0/1.1) Combo Port (on selected models)
External SATA or eSATA allows external connection of Serial-ATA devices originally designed for use inside the computer. It is up to six times faster than existing USB 2.0, & 1394 for external storage solutions and is also hot plug­gable using shielded cables and connectors up to two meters. (See “USB Port” on other sides for description.)
SPDIF Output Jack
This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant de-
vices for digital audio output. Use this feature to turn the Notebook PC into a hi- home
Combo
entertainment system.
Headphone Output Jack
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to
amplied speakers or headphones. Using this jack automatically disables the built-in speakers.
Microphone Input Jack
The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.
16
Knowing the Parts 2
8
9
7
6
2.0
10
USB Port (2.0/1.1) (on selected models)
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.
IEEE1394 Port (on selected models)
IEEE1394 is a high speed serial bus like SCSI but has simple connections and hot­plugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in
high-end digital equipment and should be marked “DV” for Digital Video port.
Cooling Fan
The cooling fan removes excess heat depending on temperature threshold settings.
IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
Modem Port
The RJ-11 modem port with two pins is smaller than the RJ-45 LAN port and supports a standard telephone cable. The internal modem supports up to 56K V.90 transfers. The
built-in connector allows convenient use without additional adapters.
IMPORTANT! The built-in modem does not support the voltage used in digital phone systems. Do not connect the modem port to a digital phone system or else damage will occur to the Notebook PC.
Power (DC) Input
The supplied power adapter converts AC power to DC power for use with this jack. Power sup­plied through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent damage to the Notebook PC and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE. BE SURE
NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.
17
2 Knowing the Parts
2
3
4
1
5
HDMI
1
2 3 54
6 7 8
2.0

Left Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
LAN Port
The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.
TV-Out Port
The TV-Out port is an S-Video connector that allows routing the Notebook PC’s display to a television or video projection device. You can choose between simultaneously or single display. Use an S-Video cable (not provided) for high quality displays or use the provided RCA to S-Video adapter for standard video devices. This port supports both NTSC and PAL formats.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor
or projector to allow viewing on a larger external display.
USB Port (2.0/1.1) (on selected models)
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.
HDMI
HDMI Port
HDMI (High-Denition Multimedia Interface) is an uncompressed all-digital audio/ video interface between any audio/video source, such as a set-top box, DVD player,
and A/V receiver and an audio and/or video monitor, such as a digital television
(DTV). Supports standard, enhanced, or high-denition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-
channel digital audio, with bandwidth to spare to accommodate future enhancements or requirements.
18
Knowing the Parts 2
8
7
6
Optical Drive
The Notebook PC comes in various models with different optical drives. The Notebook
PC’s optical drive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R) or re-writable (RW) capabilities. See the marketing specica-
tions for details on each model.
Optical Drive Electronic Eject
The optical drive eject has an electronic eject button for opening the tray. You can also eject the optical drive tray through any software player or by right clicking the optical drive in Windows “Computer” and selecting Eject.
Optical Drive Emergency Eject (location varies by model)
The emergency eject is used to eject the optical drive tray in case the electronic eject does
not work. Do not use the emergency eject in place of the electronic eject.
19
2 Knowing the Parts
1
2
1
2

Front Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
Display Panel Button
Press the display panel button to open the display panel.
WARNING! When opening, do not force the display panel down to the table or else the hinges may break! Never lift the Notebook PC by the display panel!
Infrared Port (IrDA) (on selected models)
The infrared (IrDA) communication port allows convenient wireless data communication
with infrared-equipped devices or computers. This allows easy wireless synchronization
with PDAs or mobile phones and even wireless printing to printers. If your ofce supports IrDA networking, you can have wireless connection to a network anywhere provided there is a direct line of sight to an IrDA node. Small ofces can use IrDA technology to share a printer between several closely placed Notebook PCs and even send les to each other without a network.
20
Knowing the Parts 2
1
2
21

Rear Side

Refer to the diagram below to identify the components on this side of the Notebook PC.
Battery Pack
The battery pack is automatically charged when the Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving
temporarily between locations. Battery time varies by usage and by the specications for this Notebook
PC. The battery pack cannot be disassembled and must be purchased as a single unit.
Kensington® Lock Port
The Kensington® lock port allows the Notebook PC to be secured using Kensington® com­patible Notebook PC security products. These security products usually include a metal
cable and lock that prevent the Notebook PC to be removed from a xed object.
Some may also include a motion detector to sound an alarm when moved.
21
2 Knowing the Parts
1
2
3
3

Power Station (optional)

The optional Power Station allows quick connection and disconnection to all your desktop computer
peripherals. Dock your Notebook PC to expand its capabilities by emulating a powerful desktop computer when you are in your ofce or at home. Quickly detach your Notebook PC for instant portability.
IMPORTANT: Make sure the Power Station’s power adapter is con­nected and has power before docking the Notebook PC. (The Note­book PC’s own power adapter can be attached or removed.)
Docking the Notebook PC
(1) Set the front of the Notebook PC down rst.
(2) Align the triangular marks on the Notebook PC
and Power Station.
(3) Set the rear of the Notebook PC down and press
down as shown.
WARNING: When your Notebook PC is attached to the Power Station, never pickup the Notebook PC alone. Always pickup the entire assembly by the bottom of the Power Station.
22
Power Station (optional) Cont.
1
2
3
Ejecting the Notebook PC
While the Notebook PC is turned ON:
(1) Turn OFF or undock the Notebook PC. Make
(2) Press the Power Station Mechanical Eject But-
(3) Lift up the rear of the Notebook PC with both
Knowing the Parts 2
sure attached peripherals are not in use, press
the Dock/Undock Computer Button on the
Power Station or Undock in Windows. The Power Station docking indicator will blink
rst and then turn OFF. If Windows notify you
of a failure to undock, you must turn off the Notebook PC before ejecting from the Power Station.
ton.
hands.
IMPORTANT: If the Notebook PC enters hibernation while it is attached to the Power Station, do not eject it. Wake up the Notebook PC and Select “Undock Computer” from Windows “start” before ejecting it from the Power Station.
While the Notebook PC is OFF or undocked:
(1) Press the eject button.
(2) Lift up the rear of the Notebook PC.
Undocking in Windows
Make sure attached peripherals are not in use, then select Undock Computer from Windows start be­fore ejecting the Notebook PC. If Windows notify you of a failure to undock, you must turn off the
Notebook PC before ejecting from the Power Station.
23
2 Knowing the Parts
3
4
5
1
5
2
1
3
4
2
5
Power Station (optional)
Top Side
Power Station Docking Indicator
The Power Station docking indicator lights when the Notebook PC is docked (by software) to the
Power Station. When the Notebook PC is undocked using the Dock/Undock Computer Button or Windows “Undock Computer” command, this indicator will blink rst and then turn OFF.
Dock/Undock Computer Button
While docked (Power Station Docking Indicator is ON): This is an electronic button
to activate “Undock Computer” in Windows start. When undocking, the Power Station Docking Indicator will blink rst and then turn OFF.
While undocked (Power Station Docking Indicator is OFF): This is an electronic button to “dock”
the Notebook PC instead of having to remove and re-attach the Notebook PC to the Power Station.
Power Station Mechanical Eject Button
This is a mechanical (not electronic) button. Press this button rmly downwards to eject the
Notebook PC from the Power Station. Turn OFF the Notebook PC or make sure attached
devices are not in use and “Undock Computer” is successful in Windows.
Power Station Connector
The Power Station connector locks the Notebook PC in place and allows the Power Sta­tion to interface with the Notebook PC.
Air Vents
The air vents allow cool air to enter and warm air to exit the Notebook PC.
IMPORTANT! Make sure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.
24
Knowing the Parts 2
1
2 3 4
1
4
2
3
2.0
Power Station (optional)
Left Side
USB Port (2.0/1.1)
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.
SPDIF Output Jack
This jack provides connection to SPDIF (Sony/Philips Digital Interface) compliant de­vices for digital audio output. Use this feature to turn the Notebook PC into a hi- home
entertainment system.
Headphone Output Jack
The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to
amplied speakers or headphones. Using this jack automatically disables the built-in speakers.
Microphone Input Jack
The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.
25
2 Knowing the Parts
1
2
3 5
4
6
7
8
2
3
1
4
5
2.0
Power Station (optional)
Rear Side
PS/2 Port
The PS/2 port is for connection to either an external PS/2 mouse or an external PS/2 keyboard.
USB Port (2.0/1.1)
The USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec (USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.
Power (DC) Input (Power Station)
The supplied power adapter converts AC power to DC power for use with
this jack. Power supplied through this jack supplies power to the Power Station, Notebook PC, and charges the Notebook PC’s battery pack. To prevent damage to the Power Station, Notebook PC, and battery pack, always use the supplied power adapter. CAUTION: MAY BECOME WARM TO HOT WHEN IN USE.
BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.
The Power Station has its own power adapter.
LAN Port
The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.
Serial Port
The 9-pin D-sub serial port supports native serial devices such as a serial drawing tab­lets, serial mouse, or serial modem. Serial devices have been slowly replaced by USB devices.
26
Knowing the Parts 2
6
7
8
Power Station (optional)
Rear Side (Cont.)
Parallel Port
The 25-pin D-sub parallel/printer port supports native parallel devices such as dot-
matrix/laser/inkjet printers, or parallel-adapted device such as external hard drives, removable drives, or scanners.
DVI
Display (DVI-D) Output (on selected models)
The Digital Video Interface port is designed to maximize video graphics output to at panel LCD monitors or other DVI-compliant device.
Display (Monitor) Output
The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor
or projector to allow viewing on a larger external display.
27
2 Knowing the Parts
1
2
2
1
Power Station (optional)
Right Side
Power Station Eject Button
This is a mechanical (not electronic) button. Press this button rmly downwards to eject the
Notebook PC from the Power Station. Turn OFF the Notebook PC or make sure attached
devices are not in use and “Undock Computer” is successful in Windows.
Kensington® Lock Port (Accessories)
The Kensington® lock port allows Notebook PC accessories to be secured using Kensington® compatible Notebook PC security products. These security products usually include a
metal cable and lock that prevent Notebook PC accessories to be removed from a xed
object. Some may also include a motion detector to sound an alarm when moved.
28

3. Getting Started

Using AC Power Using Battery Power Powering ON the Notebook PC Checking Battery Power Powering Options Power Management Modes Special Keyboard Functions Switches and Status Indicators
NOTE: Photos and icons in this manual are used for artistic purposes only and do not show what is actually used in the product itself.
29
3 Getting Started

Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts AC power from a wall
outlet to the DC power required by the Notebook
PC. Your Notebook PC comes with a universal
AC-DC adapter. That means that you may connect
the power cord to any 100V-120V as well as 220V­240V outlets without setting switches or using
power converters. Different countries may require
that an adapter be used to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to sup­port different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.
TIP: You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.
With the AC power cord connected to the AC-DC converter, connect the AC power cord to an AC outlet (preferably with surge-protection) and then connect the DC plug to the Notebook PC. Connecting the AC-DC adapter to the AC outlet rst allows you to test the AC outlet’s power and the AC-DC converter itself for compatibility problems before connecting the DC power to the Notebook PC. The power indi-
cator on the adapter (if available) will light if the power is within accepted ranges.
IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servic­ing. Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.
NOTE: This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.
WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP IT AWAY FROM YOUR BODY.
30
Loading...
+ 67 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use