Asus TW100-E6 config Guide
TW100-E6
CompactFlash I/II/MD
Smart Card
MS/MS PRO/SD/MMC
Conguration Guide
E6056
First Edition
August 2010
Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purposes, without the express written permission
of ASUSTeK COMPUTER INC. (“ASUS”).
ASUS provides this manual “as is” without warranty of any kind, either express or implied, including but not
limited to the implied warranties or conditions of merchantability or tness for a particular purpose. In no
event shall ASUS, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental,
or consequential damages (including damages for loss of prots, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages
arising from any defect or error in this manual or product.
Specications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS.
ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual,
including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
II
Contents
Revision history .......................................................................................... III
Safety information ...................................................................................... IV
Chapter 1: Product introduction
1.1 Key features .................................................................................. 1-2
1.2 System overview .......................................................................... 1-3
1.3 Front panel features ..................................................................... 1-4
1.4 Rear panel features ...................................................................... 1-5
1.5 Systemspecications ................................................................. 1-6
Chapter 2: Components
2.1 Upgrading CPU and CPU heatsink ............................................. 2-2
2.2 Upgrading system memory ......................................................... 2-3
2.3 Upgrading hard disk drives ......................................................... 2-4
2.4 Upgrading 5.25-in drives ............................................................. 2-5
2.5 Upgrading the smart card reader ............................................... 2-5
2.6 Upgrading expansion card .......................................................... 2-6
2.7 OS support list ............................................................................. 2-6
Revision history
Revision Revision history Date
V1 First release of TW100-E6 conguration guide August 2010
III
Safety information
Electrical Safety
• Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing any additional devices to or from the system, contact
a qualied service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you service.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your dealer.
Operation Safety
• Servicing of this product or units is to be performed by trained service
personnel only.
• Before operating the server, carefully read all the manuals included with the
server package.
• Before using the server, make sure all cables are correctly connected and the
power cables are not damaged. If any damage is detected, contact your dealer
as soon as possible.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Place the server on a stable
surface.
This product is equipped with a three-wire power cable and plug for the user’s
safety. Use the power cable with a properly grounded electrical outlet to avoid
electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer. Dispose of used batteries according to the manufacturer’s
instructions.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or
carrying the system.
IV
Chapter 1
This chapter describes the key features
of TW100-E6. It includes the product
overview and general specications.
Product introduction
1-
1.1 Key features
TW100-E6, with the latest and fastest I/O solution, is the best choice of new
generation workstation system that requires high performance and ultra bandwidth
of data transmission. Its super quietness working level is also ideal for SOHO &
SMB users.
True USB 3.0 Support
• Up to 4.8Gbps speed allows you to transfer data 10X faster and is also
backward compatible with USB 2.0 components.
True SATA 6Gb/s Support
• Delivers up to 6.0Gb/s data transfer rates.
• Gets enhanced scalability, faster data retrieval, double the bandwidth of current
bus systems.
Ultra-Quiet Working Environment
• Runs at very low acoustic level (24.5dBA at idle mode), providing super quiet
working environment for SOHO & SMB users
SAS Upgrade Kit for Multiple Storage Solution
• Optional ASUS upgrade kits SASsaby 1064E (supports LSIR Integrated RAID 0,
1, 1E) and SASsaby M (supports H/W RAID 0, 1, 10, 5)
• Provides direct support for SAS storage and ensure reliable data protection.
ExtremePowerEfciency
• EPU (Energy Processing Unit) for optimal CPU power management.
• Equipped with 80+ Bronze PSU enhances system power efciency.
High Quality Components for Great System Reliability
• 16+ 3 phase power design reduces ripples of input current and out voltage.
• Utilizes all Japan-made 5000hr ultra long life conductive polymer capacitors
Chapter 1: Product introduction1-2
Loading...