Asus Q170S1/CSM, Q170S1 User’s Manual

Q170S1
Motherboard
E11925 First Edition
August 2016
Copyright © 2016 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1) for free by downloading it from http://support.asus.com/download or (2) for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location
where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc. Legal Compliance Dept. 15 Li Te Rd., Beitou, Taipei 112 Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information. ASUSTeK is eager to duly provide complete source code as required under various Free Open Source
Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notication to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii
Contents
Safety information ...................................................................................... iv
About this guide ......................................................................................... iv
Package contents ....................................................................................... vi
Q170S1 specications summary ............................................................... vi
Chapter 1: Product introduction
Motherboard overview ............................................................................. 1-1
Central Processing Unit (CPU) ................................................................ 1-7
System memory ........................................................................................ 1-8
Chapter 2: BIOS information
BIOS setup program ................................................................................. 2-1
EZ Mode ..................................................................................................... 2-2
Advanced Mode ........................................................................................ 2-3
Exit menu ................................................................................................... 2-4
Appendix
Notices .......................................................................................................A-1
ASUS contact information .......................................................................A-5
iii

Safety information

Electrical safety
To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
Before installing the motherboard and adding components, carefully read all the manuals that came with the package.
Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
Place the product on a stable surface.
If you encounter technical problems with the product, contact a qualied service
technician or your retailer.

About this guide

This user guide contains the information you need when installing and conguring the
motherboard.
How this guide is organized
This guide contains the following parts:
Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.
Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus. Detailed descriptions for the BIOS parameters are also provided.
iv
Where to nd more information
Refer to the following sources for additional information and for product and software updates.
1. ASUS websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2. Optional documentation
Your product package may include optional documentation, such as warranty yers,
that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION: Information to prevent damage to the components when completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text Indicates a menu or an item to select.
Italics
<Key> Keys enclosed in the less-than and greater-than sign
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
Used to emphasize a word or a phrase.
means that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or Return key.
names are linked with a plus sign (+).
v

Package contents

Check your motherboard package for the following items.
Motherboard
Accessories
Application DVD
Documentation
If any of the above items is damaged or missing, contact your retailer.
ASUS Q170S1 motherboard
1 x I/O Shield
1 x Support DVD
1 x User Manual
Q170S1 specications summary
LGA1151 socket for 6th Generation Intel
Celeron® processors
CPU
Chipset Intel® Q170 Express Chipset
Memory
Graphics
Storage
LAN
Audio Realtek® ALC3236 4-channel High Denition Audio CODEC
Front panel I/O ports
Supports Intel® 14nm CPU, max 65w (depends on cooling solution)
Supports Intel® Turbo Boost Technology 2.0*
* The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. ** Refer to www.asus.com for Intel® CPU support list
2x SO-DIMMs, max 32 GB, DDR4 non-ECC, un-buffered memory
Dual-channel memory architecture
* Refer to www.asus.com for the latest Memory QVL (Qualied Vendors List).
Integrated graphics processor
Multi-VGA output support: 2 HDMI, DP and LVDS ports
- Supports HDMI with maximum resolution of 4096 x 2160 @24Hz / 2560 x 1600
@60Hz
- Supports DP with maximum resolution of 4096 x 2160 @24Hz / 3840 x 2160 @60Hz
- Supports LVDS with maximum resolution of 1920 x 1200 @60Hz
Maximum shared memory of 1024 MB
Intel® Q170 Express Chipset:
- 2 x SATA 6.0 Gb/s ports
- 1 x M.2 SSD 2280 connector
Intel® I219LM Gigabit LAN
1 x headphone/microphone combo port
1 x USB 3.0 Type C port
1 x USB 3.0 Type A port
1 x microphone port
®
Core™ i7 / i5 / i3, Pentium®, and
(continued on the next page)
vi
Q170S1 specications summary
1 x DC power connector
Rear panel I/O ports
Internal connectors
BIOS features
Support DVD
OS support
Form factor Mini-STX form factor: 5.5 in. x 5.8 in. (14.0 cm x 14.7 cm)
2 x HDMI-OUT ports
1 x DisplayPort
1 x LAN (RJ-45) port
2 x USB 3.0/2.0 ports
1 x LVDS connector
2 x SATA 6.0 Gb/s connector
1 x M.2 SSD connector supports M Key and type 2280 storage devices
1 x M.2 Wi-Fi connector supports E Key and type 2230 Wi-Fi devices
1 x CPU Fan connector
1 x Chassis Fan connector
1 x COM connector
1 x TPM connector (14-1 pin)
1 x RTC battery header
1 x System panel connector
1 x Clear CMOS jumper
1 x SATA power connector
1 x Backlight inverter voltage selection header
1 x FDP (Flat Panel Display) brightness header
1 x Panel voltage selection header
1 x Panel off header
1 x DIS ME jumper
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI 2.0, WfM2.0, SM BIOS 3.0,
ACPI 5.0, Multi-language BIOS, ASUS EZ Flash 3, ASUS CrashFree BIOS 3, My
Favorites, Quick Note, Last Modied Log, F12 PrintScreen function, and ASUS
DRAM SPD (Serial Presence Detect) memory information
Drivers
ASUS utilities
EZ Update
Anti-virus software (OEM version)
Windows® 10 (64-bit),
Windows® 8.1 (64-bit),
Windows® 7 (32-bit / 64-bit)*
* Please refer to ASUS ofcial website and download “Windows® 7 installation guide” and
“ASUS EZ installer” to install Windows® 7.
Specications are subject to change without notice.
vii
Product introduction

Motherboard overview

Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so
can cause you physical injury and damage to motherboard components.
DIS_ME
CLRTC
CPU_FAN
DC_PWR
Place this
side towards
the rear of the
chassis
HDMI1
HDMI2
DP
LAN_USB3_45
18
BLKT_PWR_SEL
VCC_PWR_SEL
PANEL_SW
Intel
I219LM
BATT_CON
®
2280
LVDS
14151617
4 62 31
14.7cm(5.8in)
LGA1151
Intel Q170
®
LCD_BLKT_PANEL
ASM1480
+VRM
2230
DIGI
CHA_FAN
5
Q170S1
DDR4 SODIMM_B1 (64bit, 260-pin module)
DDR4 SODIMM_A1 (64bit, 260-pin module)
M.2(WIFI)
Super
I/O
128Mb
BIOS
TPM
F_PANEL
ALC 3236
1112313 910
USB3_3
M.2(SOCKET3)
AUDIO
COM
1
SATA_PWRCON
SATA6G_1 SATA6G_2
MIC IN
USB3_C1
7
8
14cm(5.5in)
1-1
Scan the QR code to get the detailed pin denitions.
ASUS Q170S1
Loading...
+ 17 hidden pages