TSD ■ Service Manual
1 EQUIPMENT NEED ............................................................................................................................. 3
2 INTRODUCTION ................................................................................................................................. 4
2.1 ABOUT THIS SERVICE MANUAL ......................................................................................................... 4
2.2 OVERVIEW ........................................................................................................................................... 4
2.3 PRODUCT SPECIFICATION ................................................................................................................... 5
3 DISASSEMBLY / ASSEMBLY PROCEDURE................................................................................... 6
3.1 INTRODUCTION .................................................................................................................................... 6
3.1.1 RECOMMENDED TOOLS ...................................................................................................................... 6
3.1.2 DISASSEMBLY PROCEDURE ................................................................................................................ 7
3.1.3 ASSEMBLY PROCEDURE ................................................................................................................... 15
3.2 EXPLODED DIAGRAM ........................................................................................................................ 23
4 MMI TESTING ................................................................................................................................... 24
V1.0
TSD ■ Service Manual
2 Introduction
2.1 About This Service Manual
Using this service manual and the suggestions contained in it assures proper installation,
operation, and maintenance of the PDA P320. This manual aids service personnel in testing and
repairing P320. Service personnel should be familiar with electronic assembly, testing, and
troubleshooting methods.
2.2 Overview
ASUS P320 is the smallest Windows Mobile GPS PDA phone with
the compact size of 99*54.5*13.35 mm to further enhance mobility.
The female fashion design makes it slim and compact.
EDGE/GPRS & WiFi can help to enhance data transmission and
Bluetooth can also make the PDA connect with PC and peripherals.
New ASUS-only applications complement WM’s diversity.
2.3 Product Specification
TSD ■ Service Manual
V1.0
TSD ■ Service Manual
3 Disassembly / Assembly Procedure
3.1 Introduction
This section describes how to disassemble PDA P320. Many of the integrated devices used in this
phone are vulnerable to damage. Ensure adequate static protection is in place when handling,
shipping, and servicing any internal components.
3.1.1 Recommended Tools
� Anti-Static Mat (Ground Cord included)
� Anti-Static Wrist Strap
� Torque Screw Driver (T5 type, torque is set to 1.2kg-cm)
� Tweezers
� Plastic blade
V1.0
TSD ■ Service Manual
3.1.2 Disassembly Procedure
The following set of diagrams will demonstrate the correct sequence and action to disassemble
P320.
Step 1
Take the stylus away from the PDA.
Step 2
Remove the battery cover and take the battery away.
Step 3
Pry the left side and the top side of the antenna cover and then take the antenna cover away.
V1.0
Step 4
Unscrew and remove 5 screws on PDA by screw driver.
TSD ■ Service Manual
Step 5
Pry the top side and the left side of the top case assy and then separate the top case from the PDA.
V1.0
Step 6
Remove the Micro SD cover and the keypad.
TSD ■ Service Manual
Step 7
Remove the receiver by a pair of tweezers.
V1.0
TSD ■ Service Manual
Step 8
Release the main board from the hook on bottom case first. Then separate the main board from
the bottom case assy. Please pay attention to the GPS CON. Do not crush it when disassembling.
Step 9
Open the camera connector and remove the camera.
Step10
Remove the MIC rubber.
V1.0